• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.249-258
• /
• 2002

Natural silk is formed by two proteins : the crystalline fibroin (inside the silk thread) and amorphous sericin (as a tube outside the thread). The degumming process is used to eliminate the external sericin prior to dyeing ; generally it makes use of soaps at about pH 10. Sericin is the protein constituent that "gums"together the fibroin filaments of cocoon silk. It constitutes about 25% of the weight of the cocoon, is soluble in hot water and "gels" on cooling. The removal of sericin from raw silk, known as degumming, is a simple but important process usually employing hot dilute soap or alkaline solution and occasionally dilute acids or enzymic methods. During degumming, alkali is taken up by the sericin and the free acid from the soap is formed ; this may be deposited on the fiber, reducing the rate of degumming and protecting it from hydrolysis. Alkali is often added to maintain or restore the pH of the baths, but it is rarely used alone, since it leaves the silk rather harsh in handle. If complete sericin removal is required as for printing, sodium carbonate may be added. If the pH of the bath exceeds 11, the fibroin is attacked. Recently, According to the development of electrolysis, we can be obtained the electrolytic reduction water(above pH 11.5) and electrolytic oxidation water (below pH 3). The aim of this work was to study a degumming process using electrolytic water and a possibility of sericin recovery. The new degumming process used electrolytic water operates at $95^\circ{C}$ for 2hr. without any reagents. The wastewater of this process are formed by a solution of sericin in water. This conditions suggest the study of a possible recovery of this protein (sericin) which has an amino acid composition suitable for many used in cosmetics, textile finishing agents, animal feeding, etc. The degumming process using electrolytic water is available to reduce treatment costs and pollute and at the same time to recover sericin.

• 공업화학
• /
• 제23권5호
• /
• pp.462-466
• /
• 2012

베타-사이클로덱스트린($\beta$-cyclodextrin, $\beta$-CD) 중합체(polymer)는 가교제인 epichlorohydrin (EPI)과 $\beta$-CD의 몰 비가 10 : 1으로, 강한 염기조건에서 합성하였다. 합성한 $\beta$-CD 중합체 내의 $\beta$-CD contents는 52%였다. 광, pH반응성 복합체를 제조하기 위해 신남산을 첨가하였고 첨가된 신남산은 소수성 상호작용에 의해 $\beta$-CD 공동에 포접되었다. 형성된 $\beta$-CD 중합체와 신남산 복합체를 투과전자현미경을 이용하여 관찰하였을 때 복합체의 형상을 관찰하였다. 광 조사에 따른 이량화도는 $\lambda$ = 365 nm의 UV조사 시 증가하였으며 $\lambda$ = 254 nm의 UV조사 시 감소하였다. 또한 동적 광 산란(dynamic light scattering)장치를 이용하여 측정한 복합체의 크기는 광 조사 유무에 따라 큰 변화가 측정 되지 않았고, pH 반응성을 관찰한 실험에서도 복합체의 크기와 제타 전위(zeta potential) 모두 pH에 따른 변화가 나타나지 않았다.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.797-805
• /
• 2011

This study was carried out to investigate dyeing characteristics of CDP(cation dyeable polyester)/silk knitted fabrics with disperse type cation dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process. The apparent color depth(K/S) of the disperse type cation dyes with CDP and that of acid dyes with silk decreased slowly with increasing pH values of dyebath with the exception of sharp decrease at alkali region for CDP. The contamination behavior of CDP by the acid dyes and that of silk by the disperse type cation dyes decreased with progressing of dyeing. The migration ratio(%) of the disperse type cation dyes with CDP is low compared with that of acid dyes with silk. The sediment in mixed dying solution of disperse type cation dyes and acid dyes remarkably less compared with that of regular type cation dyes and acid dyes at $100^{\circ}C$ regardless applying of preventer agent of precipitation. When CDP/silk knitted fabrics was dyed with by with mixtures of disperse type cation dyes/acid dyes one bath or two bath dyeing method, the characteristic of reflectance spectra of CDP components were greatly influenced by disperse type cation dyes and that of silk components by acid dyes. It was confirmed that K/S values of each components of CDP/silk knitted fabrics dyed by one bath dyeing method decreased slightly compared with two bath dyeing method.

• 한국식품영양학회지
• /
• 제9권2호
• /
• pp.143-150
• /
• 1996

The studies was carried out to investigate ripening degree and functional properties of EMC produced with pancreatic protease and palatase ML. During production of EMC, the amounts of free amino acid and free fatty acid were increased with increasing the reaction time. The amount of total nitrogen(T-N) and water soluble nitrogen(WSN) were increased with increasing time. EMC had contents of 1.79eA T-N and 0.52o WSN at 60 min of hydrolysis time. SRI and FRI value had also a similar correlationship. On the gel filtration, 2 kinds of soluble proteining capacity was also shown in alkali solution. Furthermore the foaming stability had the same result as that of the solubility. The water absorption of EMC showed the highest level at pH 4.0 and 5.0.

• 미생물학회지
• /
• 제19권2호
• /
• pp.52-62
• /
• 1981

In order to interpret the effect of IAA on the phosphate metabolism and biosynthesis of organic compounds, Saccharomyces uvarum were cultured in the media treated with various concnetration of IAA $(10^{-3}M,\;10^{-5}M,\;10^{-7}M)$. Sampling at the beginning and intervals of culture, yeast cells fractionated were traced the contents of inorganic phosphate and organic compounds of various fractions. 1. Growth of Saccharomyces uvarum were enhanced by IAA $(10^{-3}M,\;10^{-5}M)$ and phosphate contents in DNA and RNA fractions treated with IAA were accelerated 2.3 times and 2 times in comparison with those of control. 2. Amounts of poly-P"A" and poly-p"B" were increased but poly-P"C" decreased during the culture. Therefore, it is considered that poly-P"C" play on most important role as a phosphate pool. 3. It is suggested that because phosphate contents in DNA, protein and lipid fractions increased, inorganic phosphates required phosphates required RNA were transferred from phosphates in cytoplasm, because these increased slowly during the culture. 4. Alkali-labile protein were accelerated by IAA and alkali stable protein only were inhibiction were enhanced by IAA while, ethanol : ether soluble fraction was induced by $10^{-7}M$ IAA in comparison with those control.X> IAA in comparison with those control.

• 대한화학회지
• /
• 제13권2호
• /
• pp.157-164
• /
• 1969

Aoolphane was treated with 30% Hydrochloric acid at $18^{\circ}C$ for two hows with stirring in order to obtain the insoluble form of SiO2 gel and to extract quantitatively both $Al_2O_3$as and $Fe_2O_3AlCl_3{\cdot}6H_2O Fe$ and $Cl_3{\cdot}6H_2O$ forms, respectively, at the same time. $SiO_2$ gel was filtered and to the filterate Ammonia was added to precipitate $Al(OH)_3[Fe(OH)_3 Contaminated ]$ The precipitate was separated by filteration and the filterate was recovered as the form of $NH_4Cl$. The precipitate was treated with 200g (NaOH)/l Concentration of NaOH a little excessively to the equivalent at $65~70^{\circ}C$ as $Fe(OH)_3$ formed was insoluble, it was filtered of and to the filterate containing $NaAl(OH)_4(OH_2)_2$Carbon dioxide gas was bubbled at $50^{\circ}C~90^{\circ}C$ to obtain the precipitate with excellent filterability and crystallinity. The product was certified to be Dawsonite $(NaAl(OH)_2CO_3)$ by X-Ray diffraction analysis at below $40^{\circ}C$, when $CO_2$ gas was bubbled into the relatively lower concentration of $NaAl(OH)_4(OH_2)_2$ solution, the precipitate of very fine particles was formed, which was hard to filter and with the Composition of $\alpha-Al_2O_3-H_2O$ (Boehmite).

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.179-185
• /
• 2009

The esterification of the reactants of Jatropha oil and methanol added by propyleneglycol was done using p-TSA catalyst. And then the emulsification of triglyceride and methanol was conduced by 1.0vol% GMS. The emulsified reactants were transesterified at $65^{\circ}C$ using TMAH and mixed catalyst (50wt%-TMAH+50wt%-NaOH) respectively. The esterification conversion at the 1:8 molar ratio of free fatty acid to methanol using 8.0wt% p-TSA was 94.7% within 80min. The overall conversion at the 1:8 molar ratio of mixed fat(50wt% Beef Tallow) to methanol and $65^{\circ}C$ using mixed catalyst was 95.4% The cloud point of Biodiesel decreased with the addition of petroleum diesel.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.26-33
• /
• 1996

The berberine from Amur cork tree is natural yellow dye and can be extracted more easily by water. The berberine is basic dye and was extracted at 90-95$^{\circ}C$. We have obtained the following results; 1. K/S value in the abstract of dye was increased by time-elapsing, but the reasonable time was between 90-120min. 2. The reasonable weight of Amur cork tree in the abstract of dye was between 10-20 g/L. 3. We obtained various colors in case of using mordants. ―In case of 10g/L and 20g/l, the reasonable value of mordant was 5-10%(owf). and in case of using tannic acid and $FeSO_{4}$ we could obtain high K/S value. 4. &{\lambda}_{max}& of UV spectra was shown 420nm. 5. Genarally fastness of drycleaning indicated more than grade 4. but it of perspiration was more stable in acid than alkali.

• 분석과학
• /
• 제25권2호
• /
• pp.91-101
• /
• 2012

2010년부터 지정악취물질로 관리 중인 유기지방산은 큰 반응성과 그에 따른 낮은 회수율 등의 문제로 인해, 분석이 난해한 성분으로 알려져 있다. 악취공정시험기준에서는 대기 중에 존재하는 유기지방산을 분석하는 방법으로 알칼리함침필터법과 알칼리흡수용액법을 제시하고 있다. 본 연구에서는 유기지방산의 분석기법을 전반적으로 비교검토하였다. 그러나 이들 지정분석방법에 대한 객관적인 검증이 쉽지않다는 점을 감안할 때, 유기지방산의 새로운 대안 분석방안으로 고체흡착관-저온농축탈착법 등을 고려할 필요가 있다. 고체흡착관으로 시료를 채취하고 저온농축열탈착기를 이용하여 분석할 경우, 공정시험기준상에 제시한 분석방법들에 비해 상당히 간편하고 검정이 용이하다는 이점이 있다. 본 연구에서는 이러한 분석방법에 대한 고찰에 덧붙여, 표준시료의 준비, 시료의 채취단계, 최종적인 검출단계에 대한 부분에 대해서도 검토하였다. 유기지방산의 현장시료를 채취 및 분석하기 위해서, 용기채취법의 적용은 심각한 오차를 수반할 수 있다는 점을 확인하였다. 또한 현장에서 채취한 시료의 유기지방산을 분석할 때, GC/FID에 의존할 경우, 여러 가지 간섭 성분의 영향을 배제하기 어렵다. 따라서 유기지방산의 분석에는 GC/MS를 이용하여 정량뿐 아니라 정성적인 부분까지 동시에 검토하는 것이 중요하다.

• 한국철도학회논문집
• /
• 제4권2호
• /
• pp.62-70
• /
• 2001

Pure copper, Cu-1.1wt%Cd and ACSR(Aluminum Conductor Steel Reinforced) have been used as catenary materials of the electric railway system. Since these materials may be exposed to the corrosive environments like polluted air, acid rain and sea water, it is important to investigate the corrosion rates in various corrosive environments. The aqueous corrosion characteristics of catenary materials in aerated acid, neutral and alkali solutions were studied by using immersion corrosion tests, electrochemical measurements and analytical techniques. In order to examine corrosion characteristics according to the dissolved oxygen content, pH, chloride ion concentration ion, and the addition of Cd to Cu, a series of tests such as potentiodynamic polarization, a.c impedance spectroscopy and galvanic corrosion tests were carried out with these materials. Results showed that the addition of Cd to Cu and chloride ion in the solution have an adverse effects on the resistance to corrosion. Additionally, Galvanic currents between Al and steel wires of ACSR were confirmed by using ZRA(zero resistance ammeter) method.