• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.591-593
• /
• 2003

Silicone composites for high voltage insulator(HVI SC) were prepared by adding aluminum trihydrate(ATH) treated by surface treatment agent to base silicone compound at the ratio of 100:20, 100:40, 100:60, 100:80, and 100:100, respectively. And also, ATH was treated by various surface treatment agents, such as stearic acid, acryl silane vinyl silane under compounding process. electrical properties were investigated for the various contents of ATH and solace-treatment agents we mlas ured volume resistivity, breakdown and tracking resistance were for HVISC containing ATH treated by viuyl silane.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.264-272
• /
• 1998

The effect of catalytic condition on the properties of SiO2 aerogels has been investigated and then the dri-ed aerogels were partially densified to induce mechanical strength by heat treatment in order to prepare Type-VI silica by Sol-Gel method. Aerogel made by 1-step base process had the highest skeletal density lowest shrinkage and the smallest particle size. But in case of using acid catalyst in both 1st and 2nd step had the lowest skeletal density highest shrinkage and the largest particle size The aerogel synthesized by 1-step base process was most transparent because of its homogeneous microstructure. During heat treatments cracks occurred below 200$^{\circ}C$ for aerogel with the skeletal density lower than 1.9 g/cm3 but the with the higher skeletal density did not cracked up to 800$^{\circ}C$ shrinkage and skeletal density increased as heating temperature increased due to condensation and viscous sintering mechanism.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.357-365
• /
• 2011

This study was carried out to investigate the effects of the feeding level of cracked whole barley (CWB) on fatty acid composition, free amino acid content, organic acid content, pH, HDL cholesterol, total phenol and DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity of finishing Hanwoo steers. The dietary treatments were consisted of five types (C: base feed + 0% CWB, T1: base feed + 10% CWB, T2: base feed + 20% CWB, T3: base feed + 30% CWB, T4: base feed + 40% CWB). A total 30 Hanwoo steers(588.6${\pm}$11.8kg) were allocated into 5 feeding groups, and a total of thirty Hanwoo steers raised from 24 to 30 months. Linoleic acid of fatty acid composition was significantly higher for cracked CWB treatments (T1, T2, T3, and T4) than C, and T3 of CWB treatments was the highest than the other treatments (P<0.01). SFA, USFA, MUFA and USFA/SFA did not differ among the treatments. On the contrary, PUFA was significantly higher for CWB treatments(T1, T2, T3, and T4) than C, and T3 was the highest (P<0.05). EAA was higher in the order of T1 > T2 > C > T3 > T4 (P<0.05). NEAA was higher in the order of T2 >T3 >T1 >C >T4, although a statistical significance was not detected. The total organic acid content was the highest for T3 (20.15 mg/100g) and the lowest for T2 (13.19mg/100g). pH and total phenol of all treatments were did not differ. HDL cholesterol was higher in the order of T1 > C > T4 > T2 > T3 (P<0.01). DPPH radical scavenging activity was in order of T1 > T2 >T4 > C > T3 (P<0.01). Based on the above results, T1 treatment compared to other treatments have been shown to improve EAA, DHL, and DPPH radical scavenging activity.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.257-261
• /
• 2010

The development of blood ionic changes could be precipitated in acid-base disorder and subsequent treatment. As technology for detecting circulating ionized $Mg^{2+}$ (the most interesting form with respect to physiological and biological properties) is now available in veterinary clinical medicine. This present study investigated the changes of whole blood ionized $Mg^{2+}$ correlated with acute metabolic and respiratory alkalosis in rodent model. Metabolic alkalosis was induced by intravenous infusion with $NaHCO_3$ and mechanical hyperventilation was applied for respiratory alkalosis. We founded that the blood ionized $Mg^{2+}$ could be reversibly decreased by the $NaHCO_3$-induced acute metabolic alkalosis but irreversibly increased by the mechanical hyperventilation-induced respiratory acidosis and respiratory acidosis. We suggested that the potential change in blood suggested that the potential change in blood ionized $Mg^{2+}$ should be counted in treatment of acid-base disorders.

• Food Science of Animal Resources
• /
• v.22 no.2
• /
• pp.164-171
• /
• 2002

The purpose of this study was to evaluate inhibitory activity of a bacteriocin mixture from lactic acid bacteria(LAB) against foodborne pathogens. Each bacteriocin solutions were prepared by growing nine strains of bacteriocin producers in MRS broth for 18~24 h followed by centrifugation(8000$\times$g, 20 min, 4$^{\circ}C$). Bacteriocins were purified from ammonium sulfate precipitation and were resuspended in 50 mM phosphate buffer(pH 7.0). Nine bacteriocins were mixed together and then allowed to freeze at -2$0^{\circ}C$. The mixture of nine bacteriocins showed enhanced inhibitory activity compared to each of bacteriocins and inhibited the Gram negative pathogens including Escherichia coli 0157:H7, Klebsiella pneumoniae, Pseudomonas chlororaphis and Shigella sonnei. The mixture of bacteriocin solutions was significantly lower than controls when a freeze-dried bacteriocin mixture was added to frank sausage, Mozzarella cheese and pork loin. With addition of bacteriocin mixture, total mesophilic bacteria in pork loin were constant over storage period, whereas total mesophilic bacteria in Mozzarella cheese and frank sausang slightly increased. Total viable cells of control group increased during storage without bacteriocin treatment. Volatile base nitrogen content of pork loin during storage also increased significantly without bacteriocin treatment. The bacteriocin mixture was capable of inhibiting pathogenic and spoilage microorganisms and extending the shelf-life of cheese and meat products during storage.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.1-8
• /
• 2001

Epoxy composites filled with natural zeolite was prepared to investigate the effects of silane coupling agent, ${\gamma}$-APS (${\gamma}$-aminopropyltriethoxysilane)on the surface free energy, tensile properties and interfacial morphology. The value of Lifshitz-van der Waals component, ${\gamma}{\frac{LW}{SV}}$ for polar was $19.22mJ/m^2$ and increased, while that of Lewis acid-base component, ${\gamma}{\frac{AB}{SV}}$ for polar was $15.27mJ/m^2$ and decreased with the increasing content of ${\gamma}$-APS treatment. It is due that the surface of the zeolite is more coated by hydrophobic of alkyl group than hydrophilic amine or hydroxyl group. The tensile strength and Young's modulus of epoxy system were improved by the treatment with ${\gamma}$-APS due to the strong interface bonding, which was confirmed by SEM.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.431-437
• /
• 1994

The role and the formation of surface and bulk acid sites of heteropoly acids were studied by examining ethanol conversion and MTBE (methyl t-butyl ether) decomposition reaction. In ethanol dehydration diethylether was formed on the surface acid site of 12-tungstophosphoric acid, whereas ethylene was formed in the bulk acid site of the catalyst. It was revealed that water reinforced the bulk acid site of the catalyst, while organic base decreased the bulk acid function of the catalyst. The formation of acid sites of metal salts was due to hydrolysis of crystalline water and/or partial substitution of metal, and with hydrogen treatment, the acid site was reappeared. Also catalyst design as a selective oxidation catalyst was possible by controlling acid function of heteropoly acid catalyst.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.401-406
• /
• 2005

In this work, the effect of chemical treatment of multiwalled carbon nanotubes (MWNTs) on glass transition temperature (Tg), thermal stability, and dynamic viscoelastic behaviors of MWNTs-reinforced epoxy matrix composites has been studied by differencial scanning calorimeter (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) measurements. The MWNTs were chemically treated with 35 wt％ $H_3PO_4$ (A-MWNTs) or 35 wt％ KOH (B-MWNTs) solutions and the changes of surface properties of chemically treated MWNTs were examined by pH, acid and base values, Fourier transfer-infrared spectroscopy (FT-IR), and x-ray photoelectron spectroscopy (XPS) analyses. The chemical treatments based on acid and base reactions led to a significant change of surface characteristics and chemical compositions of the MWNTs, especially A-MWNTs/epoxy composites had higher thermal stability and dynamic viscoelastic properties than those of B-MWNTs and non-treated MWNTs/epoxy composites. These results were probably due to the improvement of interfacial bonding strength, resulting from the acid-base interaction and hydrogen bonding between the epoxy resins and the MWNT fillers.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.65-72
• /
• 1999

In order to minimize flexible printed circuit(FPC), which is used in computer, communication, medical facility, aviation space industry, it is required to improve the interfacial adhesion of polymide/epoxy or polyimide/polyimide consists of FPC. In this study, it was considered to improve the adhesion strength of polyimide/epoxy joint by introducing functional group on polyimide film and improving mechanical property of epoxy. Functional group on polyimide film was introduced by changing polyimide film surface to polyamic acid in KOH aqueous solution. The optimum conditions for surface modification were the concentration of 1M KOH and treatment time of 5min. Also, the optimum adhesion strength of polyimide/epoxy joint was obtained using rubber modified epoxy and polyamic acid as a base resin and curing agent of epoxy adhesive, respectively. The degree of surface modification of polyimide film examined with contact angle measurement of FTIR, thus modification of polyimide to polyamic acid was identified. Fracture surface of plymide/epoxy joint was analyzed by scanning electron microscopy, and modified polyamic acid reimidezed to polymide as increasing curing temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.211-218
• /
• 2007

Based on the Benzoflex (Vesicol Chemical Co.) as PVC plasticizer substituents for Di-n-octyl phthalate (DOP), a series of new aromatic carboxylic acid ester compounds were designed as plasticizers, synthesized, and screened for the endocrine disrupting activity. 2-Hydroxybenzoic acid (1) and 2-methoxybenzoic acid (2) as the commercially available starting materials were reacted with diethylene glycol (3) in the presence of p-toluenesulfonic acid using Dean-Stark column to give diethylene glycol di-(2-hydroxy)benzoate (4, KH01) and diethylene glycol di-(2-methoxy)benzoate (5, KH02), respectively. And diethylene glycol di-(3-pyridinyl) ester (7, KH03) and dipropylene glycol di-(3-pyridinyl) ester (9, KH04) were obtained in high yields by treatment of nicotinoyl chloride (6) with diethylene glycol (3) and dipropylene glycol (8) in the presence of triethylamine as a base. To determine the estrogenic disrupting effect of new synthetic phthalate analogues, E-screen assay method was used. Of these compounds, 4 (KH01) was found to be compound without endocrine disrupting effect.