• Journal of Physiology & Pathology in Korean Medicine
• /
• v.35 no.6
• /
• pp.255-260
• /
• 2021

Crohn's disease (CD) is an idiopathic inflammatory bowel disease (IBD) with unknown etiopathogenesis. Currently there are no definitive treatment modalities for CD. This case report presents clinical remission and its maintenance of CD induced by Korean herbal medicine treatment. A 56-year-old male patient diagnosed as CD by capsule endoscopy presented to a Korean Medicine clinic with severe abdominal pain as a chief complaint. Despite taking 5-aminosalicylic acid and immunosuppressant for 2 years, his abdominal pain was worsening at the time of visit. Treatment was initiated with Jinmoo-tang based on pattern identification and continued for approximately a year with some modifications according to patient's symptom changes. He was mainly given Jinmoo-Tang for a year and clinical remission was achieved; he could stop taking western medications. For 6 years since then, he took Korean medicine from time to time when he felt his condition went down and he is still maintaining remission. There were no adverse events reported. This case report suggests that individualized Korean herbal medicine treatment may have the potential for induction and maintenance of clinical remission of CD. Further research is warranted to establish an evidence-base for such approach.

• The Plant Pathology Journal
• /
• v.32 no.2
• /
• pp.85-94
• /
• 2016

Studies were conducted to determine the role of 3-methylthioproprionic acid (MTPA) in the pathogenicity of potato stem canker, Rhizoctonia solani, and the concentrations required to inhibit growth of R. solani under laboratory and plant house-based conditions. The experiments were laid out in a completely randomized design with five treatments and five replications. The treatments were 0, 1, 2, 4, and 8 mM concentrations of MTPA. The purified toxin exhibited maximal activity at pH 2.5 and $30^{\circ}C$. MTPA at 1, 2, 4, and 8 mM levels reduced plant height, chlorophyll content, haulm fresh weight, number of stolons, canopy development, and tuber weight of potato plants, as compared to the control. MTPA significantly affected mycelial growth with 8 mM causing the highest infection. The potato seedlings treated with MTPA concentrations of 1.0-8.0 mM induced necrosis of up to 80% of root system area. Cankers were resulted from the injection of potato seedling stems with 8.0 mM MTPA. The results showed the disappearance of cell membrane, rough mitochondrial and cell walls, change of the shape of chloroplasts, and swollen endoplasmic reticulum. Seventy-six (76) hours after toxin treatment, cell contents were completely broken, cytoplasm dissolved, and more chromatin were seen in the nucleus. The results suggested that high levels of the toxin concentration caused cell membrane and cytoplasm fracture. The integrity of cellular structure was destroyed by the phytotoxin. The concentrations of the phytotoxin were significantly correlated with pathogenicity and caused damage to the cell membrane of potato stem base tissue.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.39-44
• /
• 2010

An efficient method for the rapid propagation of Smilax china from axillary buds was established. Plants with thick leafage were selected from Korea native S. china population. Axillary buds of S. china collected from selected plant and were cultured in various culture media (2MS, MS, 1/2MS, WPM, B5 and SH medium). Shoot was induced from axillary bud on MS basal medium after 4 weeks of culture. 1/2MS medium showed a higher growth rate than those of the others, while the lowest shoot growth was obtained in 2MS medium. Among the sucrose concentrations, 5% sucrose was the optimum level for shoots growth from axillay buds. Among cytokinins, $0.5mgL^{-1}$ 6-benzylaminopurine (BAP) treatment showed the best performance on shoot multiplication, yielding average shoot multiplication forming about 2.4. Rooting was induced directly near the base of the shoot on 1/2MS medium containing with three-auxins ${\alpha}-napthalene$ acetic acid (NAA), indole acetic acid (IAA) and ${\beta}-indolebutyric$ acid (IBA) (0.5 and $1.0mgL^{-1}$). The $1.0mgL^{-1}$ IBA treatments induced earliest rooting with maximum of root number and root growth. These rooted plantlets were successfully transferred to pots for 4 weeks hardening process, and were transferred to soil with above 90% survival rate.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.60-65
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using activated carbon fiber(ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at lower potential, ACF felt was chemically modified in acidic, basic and neutral solution. Pore structure and functional groups of chemically modified ACF were examined, and the effect of treatment conditions was studied for the adsorption of U(VI). Specific surface area of all ACFs decreases by this treatment. The amount of acidic functional groups decreases with basic and neutral salt treatment, while the amount increases a lot with acidic treatment. The electrosorption capacity of U(VI) decreases on using the acid treated electrode due to the shielding effect of acidic functional groups. Base treated electrode enhances the capacity due to the reduction of acidic functional groups. The electrosorption amount of U(VI) on the base treated electrode at -0.3 V corresponds to that of ACF electrode at -0.9 V. Such a good adsorption capacity was not only due to the reduction of shielding effect but also the increase of $OH^-$ in the electric double layer on ACF surface by the application of negative potential.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.267-272
• /
• 2009

During a dilute acid hydrolysis, degradation products are formed or liberated by pre-treatment of lignocelluloses depend on both the biomass and the pretreatment conditions such as temperature, time, pressure, pH, redox conditions, and addition of catalysts. In lignocellulosic biomass, sugars can be degraded to furfural which is formed from pentoses and 5-hydroxymethulfurfural (HMF) from hexoses. 5-HMF can be further degraded, forming levulinic acid and formic acid. Acetate is liberated from hemicellulose during hydrolysis. Some decomposed compounds hinder the subsequent bioconversion of the solubilized sugars into desired products, reducing conversion yields and rates during fermentation. In the present work, samples of rapeseed strawwere hydrolyzed to study the optimal pretreatment condition by assessing yields of sugars and decomposed products obtained under different reaction conditions ($H_2SO_4$ 0.5-1.25% (w/w), reaction time 0-20 min and temperature range 150-220 C). A careful analytical investigation of acid hydrolyzate of rapeseed straw has not yet been undertaken, and a well-closed mass balance for the hydrolyzate in general is necessary to verify the productivity and economic predictions for this process.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.119-125
• /
• 1979

As the first step of domestic developmint of the nucleic acid-related compounds, purine base required auxotrophs from Brevibacterium ammoniagenes ATCC 6872 were derived by the ultraviolet irradiation or the treatment of N-methyl-N'-nitro-N-nitroso guanidine (NTG), diethyl sulfate (DES), and ethylme-thyl sulfate (EMS). The optimum conditions of mutation by means of several mutagens were induced respectively. The yield of mutants was 0.083％ by the ultraviolet irradiation, 0.67％ by the NTG treatment, 1.1％ by the DES treatment, and 0.45％ by the EMS treatment. Six strains among 239 auxotrophs were screened out to accumulate 5'-lMP in the culture broth. Cry-stalline 5'-lMP was isolated from the culture broth of Brevifbacterium ammoniagenes adnine-guanine less mutant D-21530 by the use of anion exchange resin, Amberlite IRA-402, and it was identified physically and chemically as 5'-inosinic acid.

• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2007

Most of the herb residue producing from oriental medical clinics(OMC) and hospitals(OMH) is wasted in Korea. To develop of adsorbent for removing heavy metal from wastewater, the various pre-treatment methods of the herb residue were evaluated by potentiometric titration, Freundlich isotherm adsorption test and the kinetic adsorption test. The herb residue was pre-treated for increasing the adsorption capacity by cleaning with distilled water, 0.1 N HCl and 0.1 N NaOH and by heating at $370^{\circ}C$ for 30 min. It showed a typical weak acid-weak base titration curve and a short pH break like commercial activated carbon during photentiometric titration of pre-treated herb residue. The log-log plots in the Freundlich isotherm test were linear on the herb residue pre-treated with NaOH or HCl like commercial activated carbon. The adsorption capacity(qe) in the Freundlich isotherm test for $Cr^{6+}$ was 1.5 times higher in the pre-treated herb residue with HCl than in activated carbon. On the other hand the herb residue pre-treated with NaOH showed the good adsorption capacities for $Pb^{2+}$, $Cu^{2+}$ and $Cd^{2+}$ even though those adsorption capacities were lower than that of activated carbon. In kinetic test, most of heavy metals removed within the first 10 min of contact and then approached to equilibrium with increasing contact time. The removal rate of heavy metals increased with an increase of the amount of adsorbent. Likewise, the removal rates of heavy metals were higher in the herb residue pre-treated with NaOH than in that pre-treated with HCl. The adsorption preference of herb residues pre-treated with NaOH or HCl was $Pb^{2+}>Cu^{2+}$ or $Cd^{2+}>Cr^{6+}$ in the order. Conclusively, the herb residue can be used as an alternative adsorbent for the removal of heavy metals depending on pr-treatment methods.

• Carbon letters
• /
• v.6 no.2
• /
• pp.106-110
• /
• 2005

In this work, the effects of atmospheric oxygen plasma treatment of carbon fibers on mechanical interfacial properties of carbon fibers-reinforced epoxy matrix composites was studied. The surface properties of the carbon fibers were determined by acid/base values, Fourier-transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. Also, the crack resistance properties of the composites were investigated in critical stress intensity factor ($K_{IC}$), and critical strain energy release rate mode II ($G_{IIC}$) measurements. As experimental results, FT-IR of the carbon fibers showed that the carboxyl/ester groups (C=O) at 1632 $cm^{-1}$ and hydroxyl group (O-H) at 3450 $cm^{-1}$ were observed for the plasma treated carbon fibers, and the treated carbon fibers had the higher O-H peak intensity than that of the untreated ones. The XPS results also indicated that the $O_{1S}/C_{1S}$ ratio of the carbon fiber surfaces treated by the oxygen plasma led to development of oxygen-containing functional groups. The mechanical interfacial properties of the composites, including $K_{IC}$ (critical stress intensity factor) and $G_{IIC}$ (critical strain energy release rate mode II), were also improved for the oxygen plasma-treated carbon fibersreinforced composites. These results could be explained that the oxygen plasma treatment played an important role to increase interfacial adhesions between carbon fibers and epoxy matrix resins in our composite system.

• The Korea Journal of Herbology
• /
• v.31 no.6
• /
• pp.37-44
• /
• 2016

Objective : This study aimed to evaluate the protective effect of Artemisiae Capillaris Herba (AC) in reflux esophagitis (RE) rats. Methods : The AC was measured antioxidant activity through in vitro experiments, such as total polyphenol and flavonoid contents, 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and 2, 2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity. Base on the results, we had conducted in vivo experiments. Rats were divided normal, control, AC treatment 50 mg/kg BW (AC50), and AC treatment 100 mg/kg BW (AC100) groups. AC were orally administered 2 h before the induction of RE. RE was induced by tie the pylorus and the transitional junction between the forestomach and the corpus in Sprague-Dawley rats. The rats were sacrificed 5 h after the surgery. We analyzed the expression of inflammatory related markers by western blot and observed the production of reactive oxygen species (ROS) and hematoxylin-eosin staining, Results : The $IC_{50}$ of AC for DPPH and ABTS were showed 12.60 and $33.32{\mu}g/m{\ell}$ respectively. In the RE rat, AC decreased inflammatory related markers, such as phosphorylated inhibitor of ${\kappa}B{\alpha}$, nuclear factor-kappa B, cyclooxygenase-2, inducible nitric oxide synthase, and tumor necrosis factor alpha. Also, AC reduced the increased reactive oxygen species in serum. The anti-inflammatory effect of AC appeared to be partially mediated through the inhibition of ROS. Also, AC markedly ameliorated esophageal mucosa damage via the inhibition of protein expression related to inflammation. Conclusions : Therefore, these results suggest that AC would be used as a therapeutic material in protection and/or treatment for reflux esophagitis.