The purpose of this study is to examine the attitudes and the perceptions toward a single life and life satisfaction among male and female singles. In this study, a total of 160 singles aged 30 to 39 were interviewed using a questionnaire on socio-economic status, the attitudes and perceptions toward a single life, and life satisfaction. The data were analyzed using frequencies, percentages and chi-square. The major findings of this study are as follows; 1) the socio-economic status of singles are higher than that of the married ones, showing a high level of income, education, and jobs. The 54.4% of the respondents showed that they remained as singles, because they have not met desirable partners yet, and the 20.9% answer that the main reasons for being a single are working and studying. The attitudes and the perceptions toward a single life were measured in six areas; freedom, self-achievement, self-development, institutional pressure. anxiety of support systems, and sex discrimination toward singles. The freedom of a single life was shown to have significant relationships with education and income. The self-achievement, self-development, and the level of anxiety about support systems were shown to be related to the sex of singles, indicating that single women got more benefits than single men. Single men experienced more institutional pressures such as marriage pressures and filial piety than single women. There was no difference in the level of acceptance to live as a single in terms of sex. Finally, life satisfaction with a single life turned to have significant relationships with sex, age, education, and income.
Proceedings of the Korean Society for the Gifted Conference
/
1994.08a
/
pp.1.2-37
/
1994
Currently Korea encourages gifted high schoolers and junior high schoolers to participate in international achievement contests such as International Olympiads. Participants for these contests are selected nationwide among gifted students in areas of mathematics, physics, chemistry, and others. They go through a series of screening tests and programs. One of the screening processes IS Korean Olympiad School, which provides study programs each summer for student-candidates prior to following year's International Olympiads. Approximately 40 students of high schools and junior high schools, in each subject of study, gather at Korean Olympiad Summer School, and they go through intensive study programs during a short period of time. Out of 40 candidates,' less than 10 students are finally selected to participate in International Olympiads. In this study, a psycho-educational program called "Situation Coping Training Program" was developed to enhance ahievement motivation for these student-candidates. This study was to see if this training program actually improved their cognitive, emotive motivation factors, and to see how this training program affected their achievement level. Training was administered for five days. This training program was found effective for participants to increase self-efficacy, internal locus of control, and anxiety copmg. These cognitive and emotive motivation factors, other than intelligence, were found to have positive relationship with achievement level, of which self-efficacy and attribution style of students were found as two best predictors of achievement. This training program was perceived as necessary. by participants, and helpful for recovering self-confidence and self-control as well as coping pressure. Suggestions were made that this kind of training program be administered as a regular curriculum in preparative study programs such as Korean Olympiads, since cognitive, emotive motivation factors are related with achievement, and furthermore, be utilized in all gifted education programs in Korea. in Korea.
We need to understand the outcomes into adulthood for survivors born either extremely low birthweight (ELBW; <1,000 g) or extremely preterm (EP; <28 weeks' gestational age), particularly their blood pressure and cardiovascular metabolic status,respiratory function, growth, psychological and mental health performance, and functional outcomes. Blood pressure is higher in late adolescence and early adulthood in ELBW/EP survivors compared with controls. In some studies, expreterm survivors have higher insulin and blood lipid concentrations than controls, which may also increase their risk for later cardiovascular disease. ELBW/EP survivors have more expiratory airflow obstruction than do controls. Those who had bronchopulmonary dysplasia (BPD) in the newborn period have even worse lung function than those who did not have BPD. As a group, they are unlikely to achieve their full lung growth potential, which means that more of them are likely to develop chronic obstructive airway disease in later life. Although they are smaller than term born controls, their weight gradually rises and ultimately reaches a mean z-score close to zero in late adolescence, and they ultimately attain a height z-score close to their mid-parental height z-score. On average, ex-preterm survivors have intelligence quotient (IQ) scores and performance on tests of academic achievement approximately 2/3 SD lower than do controls, and they also perform less well on tests of attention and executive function. They have similar high rates of anxiety and depression symptoms in late adolescence as do controls. They are, however, over-represented in population registries for rarer disorders such as schizophrenia and Autism Spectrum Disorder. In cohort studies, ex-preterm survivors mostly report good quality of life and participation in daily activities, and they report good levels of self-esteem. In population studies, they require higher levels of economic assistance, such as disability pensions, they do not achieve education levels as high as controls, fewer are married, and their rates of reproduction are lower, at least in early adulthood. Survivors born ELBW/EP will present more and more to health carers in adulthood, as they survive in larger numbers.
Kim, Seok Kwun;Lee, Jang Ho;Han, Jae Jung;Jung, Ki Hwan;Lee, Keun Cheol;Park, Jung Min
Archives of Plastic Surgery
/
v.32
no.1
/
pp.29-36
/
2005
Craniosynostosis is the premature fusion of one or more sutures of either cranial vault or base. Fused sutures may impede normal growth of the calvaria, leading to characteristic skull deformities; Morphological craniosynostosis is classified descriptively. Being craniosynostosis uncorrected the deformity progresses continuously and causes an increase of intracranial pressure. The surgical involvement aims at the expansion of intracranial space as well as satisfactory achievement of craniofacial shape. Early surgical correction in infancy prevents the deformity from the further progression and possible associated complication of high intracranial pressure. A long period of follow-up is essential to asses the outcome of an effectiveness of the surgery. measurement of intracranial volume has been concerned in medical personnel and anthropologists for many years. A reliable and accurate measurements of the intracranial volume facilitates to make a diagnosis and treatment of craniosynostosis. Pre-and postoperative change of intracranial volume was evaluated with 3D CT scanning in 12 cases of craniosynostosis who underwent frontal advancement and total cranial vault remodeling. Increased intracranial volume is attributed to surgical release of craniosynostosis and natural growth. We conceive that the intracranial volume is significantly increased after surgical correction of fused cranial sutures and along with natural growing. A procedure of frontal advancement and total cranial vault remodeling is very useful to correct such a deformity as craniosynostosis. And also 2 cases out of five mentally retarded patients improved remarkably and Forehead retrusion or temporal depression followed in another two cases.
Jang, Woo Young;Seo, Dong Nam;Park, Jung Gyu;Kim, Hyung Tae;Lee, Sung Min;Kim, Suk Young;Kim, Ik Jin
Journal of the Korean Ceramic Society
/
v.53
no.6
/
pp.604-609
/
2016
This study reports on wet-foam stability with respect to porous ceramics from a particle-stabilized colloidal suspension that is achieved through the addition of polymethyl methacrylate (PMMA) using a wet process. To stabilize the wet foam, an initial colloidal suspension of $Al_2O_3$ was partially hydrophobized by the surfactant propyl gallate (2 wt.%) and $SiO_2$ was added as a stabilizer. The influence of the PMMA content on the bubble size, pore size, and pore distribution in terms of the contact angle, surface tension, adsorption free energy, and Laplace pressure are described in this paper. The results show a wet-foam stability of more than 83%, which corresponds to a particle free energy of $2.7{\times}10^{-12}J$ and a pressure difference of 61.1 mPa for colloidal particles with 20 wt.% of PMMA beads. It was possible to control the uniform distribution of the open/closed pores by increasing the PMMA content and by adding thick struts, leading to the achievement of a higher-stability wet foam for use in porous ceramics.
Kim, Yeong-Lee;An, Cheol-Hyeon;Bae, Yeong-Suk;Kim, Dong-Chan;Jo, Hyeong-Gyun
Proceedings of the Materials Research Society of Korea Conference
/
2009.05a
/
pp.28.1-28.1
/
2009
The superior properties of ZnO such as high exciton binding energy, high thermal and chemical stability, low growth temperature and possibility of wet etching process in ZnO have great interest for applications ranging from optoelectronics to chemical sensor. Particularly, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. Currently, low-dimensional ZnO is synthesized by metal-organic chemical vapor deposition (MOCVD), molecular beam epitaxy (MBE), thermal evaporation, and sol.gel growth. Recently, our group has been reported about achievement the growth of Ga-doped ZnO nanorods using ZnO seed layer on p-type Si substrate by RF magnetron sputtering system at high rf power and high growth temperature. However, the crystallinity of nanorods deteriorates due to lattice mismatch between nanorods and Si substrate. Also, in the growth of oxide using sputtering, the oxygen flow ratio relative to argon gas flow is an important growth parameter and significantly affects the structural properties. In this study, Phosphorus (P) doped ZnO nanorods were grown on c-sapphire substrates without seed layer by radio frequency magnetron sputtering with various argon/oxygen gas ratios. The layer change films into nanorods with decreasing oxygen partial pressure. The diameter and length of vertically well-aligned on the c-sapphire substrate are in the range of 51-103 nm and about 725 nm, respectively. The photoluminescence spectra of the nanorods are dominated by intense near band-edge emission with weak deep-level emission.
Lepage, Arnaud;Dandois, Julien;Geeraert, Arnaud;Molton, Pascal;Ternoy, Frederic;Dor, Jean Bernard;Coustols, Eric
Advances in aircraft and spacecraft science
/
v.4
no.2
/
pp.145-167
/
2017
The presented paper gives an overview of several projects addressing the experimental characterization and control of the buffet phenomenon on 3D turbulent wings in transonic flow conditions. This aerodynamic instability induces strong wall pressure fluctuations and therefore limits flight domain. Consequently, to enlarge the latter but also to provide more flexibility during the design phase, it is interesting to try to delay the buffet onset. This paper summarizes the main investigations leading to the achievement of open and closed-loop buffet control and its experimental demonstration. Several wind tunnel tests campaigns, performed on a 3D half wing/fuselage body, enabled to characterize the buffet aerodynamic instability and to study the efficiency of innovative fluidic control devices designed and manufactured by ONERA. The analysis of the open-loop databases demonstrated the effects on the usual buffet characteristics, especially on the shock location and the separation areas on the wing suction side. Using these results, a closed-loop control methodology based on a quasi-steady approach was defined and several architectures were tested for various parameters such as the input signal, the objective function, the tuning of the feedback gain. All closed-loop methods were implemented on a dSPACE device able to estimate in real time the fluidic actuators command calculated mainly from the unsteady pressure sensors data. The efficiency of delaying the buffet onset or limiting its effects was demonstrated using the quasi-steady closed-loop approach and tested in both research and industrial wind tunnel environments.
Park, Chan;Dongqi Shi;Kyujeong Song;Rokkil Ko;Park, Soojeong;Yoo, Sang-Im
Progress in Superconductivity and Cryogenics
/
v.5
no.3
/
pp.20-22
/
2003
Y$_2$O$_3$ films were pulsed laser deposited on cube textured Ni and Ni-W substrates to be used as a single buffer layer of YBCO coated conductor. Initial deposition of $Y_2$O$_3$ films was performed in a reducing atmosphere, and subsequent deposition was done in the base pressure of the chamber and oxygen atmosphere. The $Y_2$O$_3$ films have a strong cube texture (The full width at half maximum of the ø-scan of $Y_2$O$_3$ was 8.4 which was the same as that of metal substrate) and smooth crack-free microstructure. The biaxially textured YBCO films (The full width at half maximum of the ø-scan was 10.2) pulsed laser deposited on the $Y_2$O$_3$/metal exhibited Tc(R=0) of 86.5K and Jc of 0.7 MA/cm2 at 77K in self field, representing that the $Y_2$O$_3$ single buffer layer is an efficient diffusion barrier of Ni and thus very promising for the achievement of high-Jc YBCO coated conductor.
Journal of the Korean Operations Research and Management Science Society
/
v.31
no.4
/
pp.157-179
/
2006
Recently, as business becomes more dependent on information technology for their operations, SI project managers are under increasing pressure to implement SI projects on time and within budget, and to satisfy customer requirements. For the success of SI projects and customer satisfaction, SI project managers should master the critical shills and knowledge requirements and consider the proper leadership style to lead the team members and to manage SI projects. The leadership style includes four categories, such as directive leadership, supportive leadership, participative leadership, and achievement-oriented leadership. This study has examined the project managers' competency and suggests the three competency factors, which are technical, human, and conceptual shills, for the success of SI projects and customer satisfaction. The study suggests that SI project managers should master the three critical skills and knowledge requirements, and consider the proper leadership style for the successful implementation of SI projects. Also SI project managers should consider contingency factors such as project size and duration and outcome variables such as protect performance and customer satisfaction so as to enhance the leadership effectiveness.
Transactions of the Korean Society of Automotive Engineers
/
v.20
no.4
/
pp.39-45
/
2012
Today gasoline engines for vehicular application are not only faced with stringent emission regulation but also with increasing requirements to better fuel economy, while guaranteeing power density. The spray-guided type gasoline direct injection (GDI) engine has an advantage of improved thermal efficiency and lower harmful emissions. Centrally mounted high pressure injector and adjacent spark plug allow stable lean combustion due to the flexible mixture stratification. In the present study, the performance and emissions characteristics of developed spray-guided type GDI combustion system were evaluated at various excess air ratio conditions. The specific fuel consumption and nitrogen oxides ($NO_x$) emissions were reduced due to the achievement of stable lean combustion under flammability limit. Multiple injection strategy was not helpful to improve fuel consumption while further reduction of $NO_x$ emissions was possible.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.