• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.3
• /
• pp.33-60
• /
• 2007

This study alms to analyze the entrepreneur characteristics of founder on enterprise performance from the strategic viewpoint as well as features of founder of small firms such as background feature of founder, psychological features and management skill. As considered by Background features of founder include educational background of founder, his experience in business creation, consultation or course related to business creation. This study verified the effects of factor which business performance (financial, non financial) on small firms. Also, this study considered psychological features of founder include achievement desire, risk-free propensity, level of patience on vagueness and control position. And it analyzed that between such factors and performance of small firms were examined in related. In the mean time, management ability of founder, entrepreneur ability, technical and function ability were considered for management skill of founder and alalyzed effect of the factors on performance of small firm were examined. Effects of strategic intention of founder of small firm were analyzed by the strategic viewpoint. At this time, strategy of small firm was divided into product-service reform differentiation strategy, marketing differentiation strategy and cost leadership strategy. This study distributed questionnaire on CEO of small firms in Daejeon and Chungnam area for accomplish the study objective and it collected a total of 145 copies of questionnaires. As a result of analyzing collected questionnaire, this study deduced the following study results and suggestions. First, results different from those of existing studies were found Since sales, net income and profit rate of small firm were not high cause economic depression on the whole. Second, entrepreneur ability was found to be required for success of business creation. Entrepreneur ability of founder was the factor that affects both financial and non - financial performance of small firm. As such, entrepreneur ability can be regarded as the most important factor for success in business creation of small firm. Accordingly, entrepreneur ability is the most important source for success in business creation of small firm. Third, strategy of small firm was found to be the important factor that affects the non-financial performance even if it could not give significant effects on financial performance. Thus, product service reform differentiation strategy, marketing differentiation strategy and cost leadership strategy have significant effects on non - financial performance of small firm. Accordingly, it is required to operate small firm with strategic mind - set for small firm to achieve success. This study analyzed the effects of feature of founder and strategy of small firm on business performance of small firm through practical analysis on small firms in Daejeon and Chungnam area, and deduced meaningful results. However, Since this study collected data on small firms in Daejeon and Chungnam only, there is a limit in generalizing the results of this study to all small firms in Korea. Companies answering to this questionnaire process were mainly wholesale and retail service companies. In addition, there is a limit in that it failed to analyze feature of representative type of industry due to limit in number of sample, it is required to divide representative type of industry and to compare and analyze types of industry in future studies.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.368-374
• /
• 2017

The purpose of this study was to evaluate community dental hygiene practice education, by verifying its effect after applying project-based learning in improving the practical and social skills of learners. A 15-week project-based community dental hygiene practice course was held for 27 senior students, who took community dental hygiene practice course in the Department of Dental Hygiene, Gangneung-Wonju National University. Twenty-seven students were composed of 4 teams. Each team selected a target group for four workplaces for adult workers to apply the oral health promotion project. The project was then planned and conducted based on a survey on the health problems confronting each group, and an evaluation was carried out after 4 weeks. From the results obtained in comparing confidence in problem solving ability, project value, teamwork competency, and community dental hygienist competence before and after course, the improvement in project value and teamwork competence scores was not statistically significant, but all four areas showed positive results. After analyzing the project actuality, learning outcomes, and project satisfaction after course results, the actuality of the project was 19.30 points, the learning achievement was 45.19 points, and the satisfaction was 19.19 points, demonstrating that the aim of achieving actual performance competence and a learning performance exceeding expectations was accomplished. After conducting an interview survey with 8 students, it was found that they had learned social skills involving problem-solving abilities and confidence, and teamwork competence such as cooperation, role responsibility, creative thinking ability, and communication skills. Community dental hygienists should be able to acquire learner-level practical skills and social skills in the community dental hygiene and practical courses, according to their competencies and job needs. It is necessary to develop a project?based systematic learning module to enable the community dental hygiene practice to operate as a subject closely related to fields in other dental hygiene departments.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.267-286
• /
• 2013

Recently, the advanced company has been sparing no efforts in improving necessary core knowledge and technology to achieve outstanding work performance. In this rapidly changing knowledge-based society, the company has confronted the task of creating a high value-added knowledge. The role of R&D workforce that corresponds to the characteristic and role of knowledge worker is getting more significant. As the life cycle of technical knowledge and skill shortens, in every industry, the technical knowledge and skill have become essential elements for successful business. It is difficult to improve competitiveness of the company without enhancing the competency of individual and organization. As the competency development which is a part of human resource management in the company is being spread now, it is required to focus on the research of determining necessary competency and to analyze the competency of a core organization in the research institute. 'H' is the semiconductor manufacturing company which has a affiliated research institute with its own R&D engineers. Based on focus group interview and job analysis data, vision and necessary competency were confirmed. And to confirm whether the required competency by job is different or not, analysis was performed by dividing members into workers who are in charge of circuit design and design before process development and who are in the process actualization and process development. Also, this research included members' importance awareness of the determined competency. The interview and job analysis were integrated and analyzed after arranging by groups and contents and the analyzed results were resorted after comparative analysis with a competency dictionary of Spencer & Spencer and competency models which are developed from the advanced research. Derived main competencies are: challenge, responsibility, and prediction/responsiveness, planning a new business, achievement -oriented, training, cooperation, self-development, analytic thinking, scheduling, motivation, communication, commercialization of technology, information gathering, professionalism on the job, and professionalism outside of work. The highly required competency for both jobs was 'Professionalism'. 'Attitude', 'Performance Management', 'Teamwork' for workers in charge of circuit design and 'Challenge', 'Training', 'Professionalism on the job' and 'Communication' were recognized to be required competency for those who are in charge of process actualization and process development. With above results, this research has determined the necessary competency that the 'H' company's affiliated research institute needs and found the difference of required competency by job. Also, it has suggested more enthusiastic education methods or various kinds of education by confirming the importance awareness of competency and individual's level of awareness about the competency.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.670-690
• /
• 2014

The purpose of this study was to analyze paper and pencil test items of life science I in high school to diagnose problems of the test items developed by teachers, and to provide some implication for better assessment. 690 selection-type items and 162 supply-type items in life science I were collected from 10 general high schools. In the analysis of test items, the ratio of the selection-type item and the supply-type item was 81:19 in the number of items based on item type, while the ratio was 74.4:25.6 in the distribution of marks, indicating that the distribution of marks compared to the number of items was higher in the supply-type items. In the analysis by the Bloom's revised taxonomy of educational objectives, the items of 'conceptual knowledge' in the knowledge and those of 'understanding' in the cognition process were shown most in both the selection-type item and the supply-type item. In the analysis by the science assessment frameworks of NAEA, the items of 'knowledge' were shown 9 times more than those of 'inquiry'. When compared to the level of difficulty presented in the two-way specification table and the percentage of correct answers in the selection-type item, the concurrence was 41.5%. When compared to the ratio of number of items based on the item type of the supply-type items, the short-answer items were 34.0%, the descriptive items were 61.1%, and the drawing items were 4.9%. The drawing items were mainly developed in the unit of 'Cells and Continuity of Life'. When the descriptive items were classified by the acceptance of response, all the items were 'response restricted' type, and the items of 'restricted in content range' type among them were highest. When the items were classified by presentation of data, the items of 'presentation of data' type were highest(65.4%), and when classified by type of question, the items of 'knowledge description' type were highest(80.4%). In conclusion, it is needed to develop items belonging to 'inquiry' area more in the school, and to increase the ratio of the descriptive items, presenting various types of items.

• Journal of Gifted/Talented Education
• /
• v.21 no.1
• /
• pp.57-81
• /
• 2011

The purpose of this study was to explore the quality of life of musically talented students as measured by their external experiences (e.g., activities, companions) and internal experiences (e.g., flow, emotion). The participants in this study were 33 musically talented students (10 males, 23 females) aged 13 to 19. Study data were collected for 7 consecutive days using the Experience Sampling Method (ESM), which employs a cellular-phone as a signaling device. The results were as follows: First, in response to the 1625 random signals, musically talented students reported that 40.9% of their time was spent on productive activities. An additional 33.4% of time was used for maintenance activities and the rest of their time was spent on leisure/social activities. Also, musically talented students reported that 48.5% of their time was spent alone. When they were alone, they spent a lot of time engaging in productive activities (44.3%). Second, in order to measure the flow of their life, two methods were used. One used a 4-channel flow model (i.e. apathy, boredom, flow, anxiety) and the other used 8 dimensions and conditions of the flow experience (i.e. concentration, self-consciousness disappears, action and awareness merge, distorted sense of time, freedom from worry about failure, clear goals, immediate feedback, balance between challenges and skills). According to the former, when engaged in music-related activities, musically talented students usually reported flow (54.0%), while they felt apathy (41.3%) for daily routines activities. According to the latter method, musically talented students experienced flow for most productive activities, while they experienced flow least for maintenance activities. Emotional variables of ESF are comprised of 10 semantic scales (i.e. happy-sad, strong-weak, active-passive, sociablelonely, proud-ashamed, involved-detached, excited-bored, clear-confused, relaxed-worried, cooperative-competitive). Musically talented students reported experiencing the most positive emotion for social activities and experiencing the most negative emotion for maintenance activities. Results of this study assert that musically talented students had to trade off immediate enjoyment for developing their special gifts. They could not afford as much time for socializing with friends, and they had to spend more time alone compared to their peers without such gifts. Consequently, they were found to deprive themselves of the spontaneous good times that teenagers usually thrive on. They were helped in this respect by their autotelic personality traits, especially their strong need for achievement and endurance. The downside, however, is that the moment-to-moment quality of their moods suffered. The argument concerning musically talented students applies for all adolescents. The choices that talented students must make between immediate gratification and long-term development, and between solitude and companionship, are the same choices every young person must make, regardless of her or his level of talent. All of us have gifts that are potentially useful and worthy of being appreciated. But to develop these latent talents we must cultivate them, and this takes time and the investment of mental energy. The lifestyle that musically talented students develop can show us some of the choices all of us must make in order to cultivate our gifts.

• Journal of Music and Human Behavior
• /
• v.3 no.1
• /
• pp.13-28
• /
• 2006

Autistic children have difficulties in communication. They tend to have more difficulties in general expression than in understanding sentences. This thesis tested the effect of music activities on children who have difficulties in language expression. As a research method, a group of autistic middle school students was selected who were attending normal schools. Three male students were selected for the test of K-ABC and CARS. Music treatments on the selected students were applied fifteen times, twice a week, for thirty minutes every time. The total treatment process could be divided into two stages. The stage one included the first twelve treatments and the stage two included following three treatments. In the stage one, the selected autistic students learned twenty four musics under real-world-like social circumstances. In the stage two, the students repeatedly learned the twenty four musics. A week before beginning the music treatment, the students were tested by PRES and a test developed by the author of this thesis. And a week after all treatments were completed, the students were tested again with the same test method to check if the students' expressive language ability got improved. The results of the research were as the following: First, the music treatment helped improve the autistic student's ability of expressing themselves such as 'requesting', 'rejecting', 'applying social customs' and 'providing information'. Second, the author of this thesis first had a hypothesis that the tested students might show different levels of achievements according to their intellectual ability or expressive language ability in K-ABC test, PRES and CARS. But it was not true. The student's level of achievement by music activities was proved not to have a significant correlation with their intellectual or expressive language abilities in the tests. Third, it was found that, through pre- and post-test of PRES, the music treatments could improve the receptive language ability as well as the expressive language ability. It saw great effect that musical data that utilize in specially this research investigator according to children's ability, autistic children write lyrics setting in social circumstance that is revealed much routinely and composes. To front, expect that suitable a lot of musics are developed in function and ability of subject person for elevation of expressive language ability.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.510-517
• /
• 2013

This study was carried out in order to be utilized as basic data necessary for developing dental hygiene curriculum by confirming the difference in propensity level and the variables of having influence upon problem-solving ability of dental hygiene students and by grasping influence of relevant variables at the point of time that requires arrangement of a learning system for promoting problem solving ability aiming to train talents who have ability available for performing successful practical affairs. The influence of factors upon the problem solving ability had statistically significant relationship with academic year, interpersonal relations, school record, and major satisfaction. According to academic year, the problem solving ability of sophomore (B=-0.182, p=0.010) was shown the lower tendency than junior. The problem solving ability was lower in when being bad (B=-0.349, p=0.020) compared to when being good as for interpersonal relations, in when the mark is under 3.0 (B=-0.328, p=0.004) than over 4.0 as for academic achievement, and in when being dissatisfied (B=-0.483, p=0.005) than when being satisfied as for the major satisfaction. Hence, to train competent people who have ability available for performing successful practical affairs, the education is considered to be likely needed that has substantial problem solving ability for reinforcing problem solving ability by grasping a learning problem oneself without the differentiated curriculum, by establishing an alternative plan for solving problem, and by searching for and acquiring necessary data according to factors of having influence upon problem solving ability of dental hygiene students.

• Journal of the Korean earth science society
• /
• v.25 no.5
• /
• pp.336-347
• /
• 2004

This study investigated the effects of the application of a variety of ICTs cause the effects on self-directed learning capability, creativity and problem-solving ability. In order to achieve the above aim, Web-Based Instructions(WBI) and instructions using CD-ROM Titles for the unit of 'the solar system and the galaxy' were applicated and analyzed which belongs to the area of 'the earth' in the subject 'science' for high school students. Instructions using WBI materials and CD-ROM titles were found to be effective on 'self-conception', 'creativity', 'future inclination', 'self-assessment ability', 'openness' and' initiative' improvement all of which belong to self-directed learning characteristics. They did not, however, show meaningful effect on improving 'learning eagemess' and 'responsibility' improvement. On looking into self-directed learning characteristics according to prerequisite learning levels, both groups and these for instruction using CD-ROM learning materials were found to have no effect on interaction. With respect to problem-solving ability improvement which is characteristic of the instruction using ICTs, WBI proved more fruitful than instruction using CD-ROM titles on improving scholastic achievement level. WBI was effective on 'fluency', 'originality' and 'resistance to premature closure'. It on the other hand, was of no use on 'abstraction of titles' and 'elaborateness' These results came from the following characteristics: WBI came into effect on 'fluency' and 'originality' in the areas of variety and vitality, which are characteristic of WBI. In the area of resistance to premature closure WBI was effective on organizing learning contents owing to the animation of picture materials which are variously presented in the web site. As a result of WBI questionnaire about WBI, an excellent effect on the structure of display, quantity of information, indication and instruction, supplementary study and further study were discussed.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.91-116
• /
• 2019

The purpose of this study is to examine the meaning of Changemaker education and to investigate the significance of Changemaker education in home economics education through a study of growth of learners applying the TEMPS program. To this end, first, the concept of Changemaker education was defined. Changemaker education is an education that changes society in a positive direction through a process of thinking about, learning about, making, and participating(playing) in various problems that we face in real life and drawing out solutions and share he solutions with others. Second, in this reasearch, the direction of Changemaker education is to make them interested in social problems and solve it and to make both the family and the career life happy and healthy by collaborating with other people. The scope of the contents is defined as "the selection of the content elements of the five domains of the child family, diet nutrition, clothing, housing and consumer life". As a way of teaching, we suggested that the TEMPS phase is followed so that the session purpose is achieved. Third, the Changemaker program consists of five steps of TEMPS among the five key ideas of Changemaker education. T(Thinking) is the step of understanding the problem and thinking about how to solve it, and E(Education) is getting the background for the next step. M(Making) is a step to create a target for problem solving, and P(Participation) and P(Play) are steps to Participation and enjoy. S(Share) is a step of changing the society through the result display, SNS sharing, and class presentation. In this study, 12 programs for middle school and 15 programs for high school were developed on the basis of TEMPS level. Each of the programs consists of 2 to 12 unit hours, which add up to 68 hours in the middle school program and 68 in high school. The learners who participated in the Changemaker program for one year (March 2, 2018~December 31, 2018) will experience improvement in many aspects including the linkage of life and education, practical ability, self-directed learning, self-esteem, sense of achievement and self-reflection, sensory observation, and so on.