• The korean journal of orthodontics
• /
• v.5 no.1
• /
• pp.21-24
• /
• 1975

The purpose of this study was to investigate the effect of sinc phosphate cement on the enamel surface of extracted teeth. The tooth was placed in a test tube, which was subjected to 5ml of 0.2M acetate buffer at pH 4 by 'window technique.' The calcium content of the acetate buffer was determined by the Perkin-Elmer Model 303 Atomic Absorption Spectrophotometer. The obtained results were summarized in the following. 1. The solubility of enamel is $0.92mg/cm^2$. ml in control group. 2. The solubility of enamel is increased by treating these with zinc phosphate cements. 3. The solubility of enamel is $0.69mg/cm^2$. ml by treating with Lee Smith cement. 4. The solubility of enamel is $0.30mg/cm^2$. ml by treating with G-C's cement.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.119-125
• /
• 1997

A stripping voltammetric procedure for determining ruthenium was developed, based on the adsorptive accumulation of ruthenium in the presence of hydrazine in acidic acetate buffer. After preconcentration of ruthenium compelex and reduction, the ruthenium-catalyzed hydrogen current at -0.84V was measured by differential pulse voltammetry. Optimal experimental conditions were found to be a stirred acetate buffer solution(pH 2.0) containing 0.01M acetate and 0.01M hydrazine, accumulation potential of -0.76V, and a scan rate of 5mV/s. The detection limit was $2{\times}10^{-9}M$ for a 7 min accumulation period. The possible interferences by other platinum group metals were also investigated.

• Archives of Pharmacal Research
• /
• v.27 no.1
• /
• pp.31-34
• /
• 2004

The electrochemical behavior of doxorubicin hydrochloride was investigated by cyclic voltammetry (CV) and square wave voltammetry (SWV). From CV and SWV studies of doxorubicin hydrochloride in the acetate buffers of various pH values, it was found that protons were involved in the reduction of the antibiotic at the $H^+/e^$- ratio at one ( $\DeltaEp/pH =-53 ∼ -61 mV at 23^{\circ}C$), proposing the electrochemical reduction of the quinone moiety in its anthraquinone aglycone. Its electrochemical behavior was pseudo-reversible in the acetate buffer of pH 3.5 by exhibiting the well-defined single cathodic and anodic waves and the ratio of $lp^a/lp^c$ at approximately one over the scan rates of 10∼100 mV/s. Fast and sensitive SWV showing a single peak of doxorubicin has been applied for its quantitative analysis using an acetate buffer of pH 3.5. A linearity was obtained when the peak currents (lp) were plotted against concentrations of doxorubicin in the range of $5.0\times10^{-7} M∼1.0\times10^{-5}$M with a detection limit of $1.0\times10^{-7}$ M.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.32-42
• /
• 1996

This study was performed to evaluate accuracy and precision of filter method and impinger method for analyzin airborne isocyanates in mixture (2, 6-TDI, HDI, 2, 4-TDI, MDI). Filter method was performed using the OSHA Method 42 and impinger method using the NIOSH Method 5521. The samples were analyzed by high performance liquid chromatography-ultraviolet detector (HPLC-UVD). After the optimum operating conditions for each method were investigated, samples with various concentration levels were quantified at the conditions. The precision was expressed by the pooled coefficient of variation(C.V.) and the accuracy by overall accuracy. The results are summarized as follows: 1. The optimum condition of filter method was determined at 35/65 ACN/buffer (0.01 M ammonium acetate) in mobile phase. And in case of impinger method, it was at 30/70 ACN/buffer(0.2 M sodium acetate). The effect of concentrations of acetate on the separation of the peaks was not significant, but, the effect of ACN/buffer ratio was significant. 2. The correlation coefficients for the two methods were above 0.9 in all isocyanate compounds. Average recovery efficiencies for 2, 6-TDI, HDI, 2, 4-TDI and MDI in filter method were 92.4%, 102.6%, 87.3% and 101.0%, respectively. Those in impinger method were 106.6%, 106.7%, 99.0% and 103.6%, respectively. As a result, the recovery efficiency of impinger method was higher than those of filter method in analyzing isocyanate compounds. 3. The pooled coefficients of variations of the methods were slightly higher than expected. The overall accuracies of the methods were within $\pm 25%$ for each isocyanate compound. Since these results satisfy NIOSH criteria, the accuracy of the experiment is appropriate. 4. As seen above, impinger method is more efficient than filter method. But, there are many disadvantages in impinger method. Therefore, solid sorbent such as a glass fiber filter must be developed in order to have the high efficiency not less than that of impinger method in the future.

• The Journal of the Korean dental association
• /
• v.20 no.7 s.158
• /
• pp.625-630
• /
• 1982

The author observed the behavior of inflammatory cells in the primary intension of incisional wound on the Albino rat palate. The superficial wounds (0.5mm depth) were made anteroposterior lineally by surgical knife. They were sacrified on 4, 8, 12, 16, 24, 48, 72 and 120 hr after wounding. The specimens were fixed in 2.5% glutaraldehyde in 0.1 M cacodylate buffer and 1% osmic acid in 0.1M cacodylate buffer, and embeddd in Epon 812. Ultrathin sections were obtained by LKB 8800, and stained with uranyl acetate/lead citrate, and observed with Corynth 500 EM.

• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.79-83
• /
• 2004

The oxidative degradation of BPA with laccase from Trametes versiclor was conducted in a closed, temperature controlled system containing acetate buffer for pH control. The effects of medium pH, buffer concentration, temperature and mediator on degradation of BPA were investigated. The inactivation of the enzyme by temperature and reaction product was also studied. The optimal pH for BPA degradation showed about 5. Buffer concentration did not affect BPA degradation. On the other hand, the enzyme stability was higher at low concentration buffer(25 mM). Temperature rise increased the degradation rate of BPA up to 45$^{\circ}C$. The valuable mediator of laccase for BPA was ABTS. Elevated temperature and reaction product irreversibly inactivated the enzyme.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.37-40
• /
• 2006

Oxide buffer layers for YBCO coated conductors were fabricated using MOD processing and development of microstructure and texture were investigated. A $CeO_2$ buffer layers were formed on RABiTS tape. Acetate-based precursor solution was employed to synthesize the precursor solution. Subsequently, the precursor solution was stabilized and modified with triethanolamine. $CeO_2$ precursor gel film was coated and annealed in $Ar/H_2$ atmosphere at high temperature. An annealed $CeO_2$ film shows mixed orientation with high (001) texturing. It was shown that (111) texture of $CeO_2$ layers were enhanced by multiple coating. This degradation was attributed to development of microcracks in the multiply coated $CeO_2$ films. Also discussed are the synthesis and the characterization of $La_2Zr_2O_7$ (LZO) buffer layers on RABiTS tape. A biaxially textured LZO buffer layer was fabricated with MOD processing method using metal alkoxide based precursor solution. It was shown that the LZO film were epitaxially grown on RABiTS tape and crack-free & uniform surface was obtained after annealing in $Ar/H_2$ atmosphere.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.43-54
• /
• 1986

To increase the bioavailability of clonixin, clonixin argininate was prepared and compared with clonixin by determining solubility, pKa, lipid-water partition coefficient, dissolution rate and in vivo tests. The results are summerized as followings; 1) The solubility of clonixin argininate was increased by 20 times in water, about 1.2 times in pH 1.2 and pH 8.0 buffer solution, and about 1.8 times in pH 6.8 buffer solution compared with that of clonixin. 2) pKa values of clonixin, clonixin lysinate and clonixin argininate were 6.32, 7.20 and 7.45, respectively. 3) The lipid-water partition coefficient of clonixin argininate was increased more than that of the clonixin in n-hexane, carbon tetrachloride, chloroform, methylene chloride, and n-butanol, but the partition coefficient of clonixin was increased more than that of clonixin argininate in benzene/pH 1.2 buffer solution, ether/pH 8.0 buffer solution, and 3-methylbutyl acetate/pH 1.2, pH 8.0 buffer solution. 4) The time required to dissolve 60% $(T_{60%},\;min.)$ of clonixin argininate was about 1.5 min. in water and pH 1.2 buffer solution, and about 5 min. in pH 6.8 buffer solution. $T_{60%}$ of clonixin lysinate was about 1.5 min. in water, about 1.8 min. in pH 6.8 buffer solution, and about 8 min. in pH 1.2 buffer solution. But $T_{60%}$ of clonixin was about 96 min. in pH 6.8 buffer solution, over 2 hours in water and pH 1.2 buffer solution. 5) Anti-inflammatory effect of clonixin argininate was increased more than that of clonixin over 6 hours, and that of clonixin lysinate was followed by lapse of time. 6) Analgesic effect of clonixin argininate was increased by 1.5 times more than that of clonixin and the effect of clonixin argininate was nearly identical with that of clonixin lysinate. 7) The absorption rates (Ka) of clonixin, clonixin lysinate and clonixin argininate were $0.169\;hr^{-1},\;0.652\;hr^{-1}$ and $0.723\;hr^{-1}$ in situ, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1409-1412
• /
• 2002

Polymeric membrane electrodes for acetate anion based on meso-(${\alpha}$,${\alpha}$,${\alpha}$,${\alpha}$)-5,10,15,20-tetrakis[2-(penta-fluorophenylurea) phenyl]porphyrin I and similar urea-functionalized porphyrins Ⅱ-Ⅳ as neutral ionophores were prepared. The membrane based on porphyrin I exhibits the best potentiometric properties in pH 6.0 rather than pH 7.0: linear stable response over a wide concentration range (6.0 ${\times}$$10^{-5}$-1.0 ${\times}$$10^{-2}$) with a slope of -59.6 mV/decade and a detection limit of log[CH3CO$O^-$] = -5.32. Selectivity coefficients obtained from the matched potential method (MPM) in pH 6.0 indicate that interferences of hydrophobic anions are very small for the membranes of porphyrins I and II having the strong withdrawing group. The electronic effect of urea-functionalized porphyrins and pH effect of buffer solutions are discussed on the potentiometric response.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.121-124
• /
• 2000

In-situ soil remediation using electrokinetics has been investigated and the attempts for the removal of hydrocarbons have been continued. In this study, the electrokinetic remediation using three different kinds of surfactnats was conducted for the removal of phenanthrene from clay The used surfactnats were APG, Brij30 and SDS. In the solubility test for phenanthrene, the experimental result was APG