• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.191-216
• /
• 2016

Since prolonged exposure to elevated ozone ($O_3$) concentrations is known to be harmful to human health, appropriate control strategies for ozone are needed for the non-attainment area such as Seoul, Korea. The goal of this research is to assess factors linked with the 1-hour ozone exceedance through a decision tree model. Since ozone is a secondary pollutant, lag times between ozone and explanatory variables for ozone formation are taken into account in the model to improve the accuracy of the simulation. Results show that while ozone concentrations of the previous day and $NO_2$ concentrations in the morning are major drivers for ozone exceedances in the early afternoon, meteorology plays more important role for ozone exceedances in the late afternoon. Results also show that a selection of lag times between ozone and explanatory variables affect the accuracy of predicting 1-hour ozone exceedances. The result analyzed in this study can be used for developing control strategies of ozone in Seoul, Korea.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.31-35
• /
• 2010

The Ring Laser Gyroscope makes use of the Sagnac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. The space launch vehicle use require the high accuracy Gyro to control and determine the altitude to deliver the satellite in the space. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller is described. The Design for Path Length Controller is composed of the demodulator, integrator, phase shifter, high voltage amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.73-77
• /
• 2002

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted far a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects tracking accuracy of the carrage and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method and neural network control. Experiments carried 7ut on the linear motor test setup show that this control methods is usable in order to reduce the motor ripple.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.26.2-26.2
• /
• 2008

YLPODS (Yonsei Laser-ranging Precise Orbit Determination System) is POD system using SLR (Satellite Laser Ranging) data. YLPODS is developed for two main purposes. The first purpose is to verify the result of POD using GPS data. The second purpose is to perform POD using only SLR data. In this study, YLPODS performance test is presented for checking the reliability of POD using only SLR data. To perform POD, the information of CHAMP and TOPEX mission is applied and SLR NP (Normal Point) data is used. The test is performed by checking both range precision and 3D accuracy (radial, along, cross direction). To confirm of 3D accuracy, CHAMP GENESIS orbit and TOPEX JPL orbit of NASA are used.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1040-1043
• /
• 1996

The accuracy of the servo control in CNC system has a great influence on the duality of machine product. Tracking performance of the servo control is deteriorated mainly by the time delay of the servo system and the inertia of the work table or bed. Contouring errors occur in every interpolation steps by the effect of the tracking performance. In this paper, $H_{\infty}$ two-degree-of-freedom(TDF) controller is designed for improvement to improve the tracking performance. The designed controller is applied 3-axis machining center model and the cutting accuracy is simulated in case of corner cutting, circular and involute interpolation. Simulation results show that $H_{\infty}$ TDF controller designed in this paper has a good effect to improve tracking performance in CNC system.

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.47-56
• /
• 1999

We have improved the control and driving system of 16' reflector at Kwanak Observatory at Seoul National University, by completing encoder unit, and by developing programs for correction of errors resulting from hardware defects. The hardware defects of this telescope system are the large backlash and the nonuniform tracking and pointing. The telescope pointing accuracy for RA is improved to a few arc minutes, and that for DEC is several tens of arc minutes. The guiding error is improved to 0.7 arcsec/minute, allowing up to 3 minutes exposure for CCD imaging under typical seeing conditions at the Observatory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.845-853
• /
• 2000

In this paper, we introduce a relationship between the sensitivity and the robustness of a system, and we propose a robust eigenstructure assignment scheme using a novel performance index which can consider the performance and the robustness of the system simultaneously. We also propose an assignment accuracy measure and a robustness measure which are used for the performance examination of the proposed robust eigenstructure assignment scheme. The usefulness of the proposed algorithm and the measures are verified by applying to controller design of a simple numerical example and the EMRAAT missile.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.1
• /
• pp.31-35
• /
• 2005

Higher productivity requires high-speed motion of machine tool axes. The iron core linear DC motor (LDM) is widely accepted as a viable candidate for high-speed machine tool feed unit. LDM, however, has two inherent disturbance force components, namely cogging and thrust force ripple. These disturbance forces directly affect the tracking accuracy of the feeding system and must be eliminated or reduced. In order to reduce motor ripple, this research adapted the feedforward compensation method and neural network control. Experiments carried out with the linear motor test setup show that these control methods are effective in reducing motor ripple.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.229-231
• /
• 1994

In recent years, as the industry has been highly developed and precised, its driving and control system have been changed, what is more, revolutionized. The requirements of these change are more accuracy, more high efficiency, more miniaturized size and more servo functions. Step motor has been adopted for driving servo systems, because of easier controllability, open-loop control, high position accuracy at low speed. In this paper, we deal with developing step motor system, and describe the procedure that contains design, analysis. testing characteristics.