• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.213-219
• /
• 2016

The position verification of the radiation source utilized in brachytherapy forms a critical factor in determining the therapeutic efficiency. Currently, films are used to verify the source position; however, this method is encumbered by the lengthy time interval required from film scanning to analysis, which makes real-time position verification difficult. In general, the source position accuracy is usually tested in a monthly quality assurance check. In this context, this study investigates the feasibility of the real-time position verification of the radiation source in high dose rate (HDR) brachytherapy with the use of scintillating fibers. To this end, we construct a system consisting of scintillating fibers and a silicon photomultiplier (SiPM), optimize the dosimetric software setup and radiation system characteristics to obtain maximum measurement accuracy, and determine the relative ratio of the measured signals dependent upon the position of the scintillating fiber. According to the dosimetric results based on a treatment plan, in which the dwell time is set at 30 and 60 s at two dwell positions, the number of signals is 31.5 and 83, respectively. In other words, the signal rate roughly doubles in proportion to the dwell time. The source position can also be confirmed at the same time. With further improvements in the spatial resolution and scintillating fiber array, the source position can be verified in real-time in clinical settings with the use of a scintillating fiber-based system.

• 대한방사선치료학회지
• /
• 제16권1호
• /
• pp.11-19
• /
• 2004

서론 및 목적 : 세기변조 방사선치료와 전신 정위적 방사선치료에서 5mm이내의 위치 정확성확인 (L-gram)은 환자치료 목적 달성을 위한 중요한 QA과정의 하나이다. 이에 본원에서 제작한 scale point를 이용하여 L-gram 영상을 얻어 환자치료의 정확성을 향상시키고자 한다. 대상 및 방법 : 본원의 MLC 부착장비인 CL2100C/D, CL21EX에서 치료중인 IMRT, SRS환자를 대상으로 기존의 상품화된 port film graticule과 본원에서 제작한 MLC scale pointer를 비교 분석하였다. 결과 : MLC를 이용한 scale pointer는 beam의 확산까지 고려한 정확한 위치를 나타내었고 MLC의 교차로 생기는 pixel 모양의 형성을 통해 어떠한 위치에서도 정확한 확인이 가능했다. 결론 및 고찰 : L-gram 확인시 약간의 시간적 투자($1{\sim}2$분)로서 정확한 위치를 나타냄으로서 L-gram 확인시간 단축과 치료부위의 정확한 위치 확인을 할 수 있었다.

• 인터넷정보학회논문지
• /
• 제20권1호
• /
• pp.25-37
• /
• 2019

심층 학습 및 온라인 생체 인식 기반 인증의 급속한 개발에 영감을 받아, 본 논문에서는 심층 학습을 기반으로 필체 인식 및 작성자 검증을 수행하는 수기 일회성 암호 인증 시스템을 제안한다. 본 논문에서는 수기로 작성된 숫자를 인식할 수 있는 합성곱 신경망과, 입력된 필체와 실제 사용자의 필체 사이 유사성을 계산할 수 있는 Siamese 신경망을 설계한다. 본 논문에서는 작성자 검증을 위한 NIST Speical Database 19 제 2판의 첫 번째 응용 사례를 제시한다. 본 논문이 제안하는 시스템은 네 장의 입력 이미지를 기반으로 한 숫자 인식 작업에서 98.58%, 작성자 검증 작업에서 93%의 정확도를 달성했다. 본 논문의 저자들은 제안한 필체 기반 생체 인식기술이 FIDO 프레임워크 기반의 다양한 온라인 인증 서비스에 활용될 수 있을 것이라 예상한다.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.141-149
• /
• 2022

본 연구에서는 공공 CCTV 함체 관리를 위한 블록체인 기반 함체기록 관리 시스템을 설계하였다. CCTV 영상 기록은 함체를 거쳐 관제센터까지 전송되기 때문에 영상기록의 변조 및 훼손 방지를 위한 함체 관리가 매우 중요하다. 최근 CCTV 함체 관리를 위해 실시간 원격 모니터링 및 개폐 상태 관리 기능을 갖춘 스마트 함체 모니터링 시스템을 사용하고 있으나 CCTV 영상기록의 안전성 확보에는 한계가 있다. 우리가 제안한 시스템은 함체기록을 블록체인에 분산 저장하여 해시값 비교를 통해 위조를 탐지하고 위조된 함체기록을 복구할 수 있다. 또한 관리서버가 수신하는 함체기록의 무결성을 확인할 수 있도록 무결성 검증 API를 제공하여 함체기록의 무결성을 보장한다. 제안 시스템의 효용성을 검증하기 위해 실험을 통해 무결성 검증 정확도와 소요시간을 측정하였다. 실험 결과 함체기록의 무결성(정확도: 100%)을 확인하였고, 검증 소요시간(평균: 73ms)이 모니터링에 영향을 미치지 않을 것으로 확인하였다.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1555-1562
• /
• 1995

This study represents the non-dimensional cutting force model. With the non-dimensional cutting force model it is possible to estimate efficiently the maximum cutting force during one revolution of cutter. Using the non-dimensional cutting force model, the feed rate and spindle speed are adjusted so as to satisfy the maximum cutting force and maximum machining error. To verify the accuracy and efficiency of the non-dimensional cutting force model, a series of experiments were conducted, and experimental results proved and verified the non-dimensional cutting force model. The NC toolpath verification system developed in this paper uses the non-dimensional cutting force model, so that it is effective for calculating the cutting force and adjusting the cutting conditions.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 춘계학술발표대회
• /
• pp.472-474
• /
• 2019

Because of the difference in network structure and loss function, Verification and identification models have their respective advantages and limitations for person reidentification (re-ID). In this work, we propose a multi-task network simultaneously computes the identification loss and verification loss for person reidentification. Given a pair of images as network input, the multi-task network simultaneously outputs the identities of the two images and whether the images belong to the same identity. In experiments, we analyze the major factors affect the accuracy of person reidentification. To address the occlusion problem and improve the generalization ability of reID models, we use the Random Erasing Augmentation (REA) method to preprocess the images. The method can be easily applied to different pre-trained networks, such as ResNet and VGG. The experimental results on the Market1501 datasets show significant and consistent improvements over the state-of-the-art methods.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.646-652
• /
• 2013

PRA(Position Reporting Accuracy) for EO/IR(Electro-Optic/Infrared) airborne camera is an important factor in geo-pointing accuracy. Generally, rate table is used to measure PRA of gimbal actuated camera like EO/IR. However, it is not always possible to fix an EUT(Equipment for Under Test) to rate table due to capacity limit of the table on the size and weight of the object(EUT). Our EO/IR is too big and heavy to emplace on it. Therefore, we propose a new verification method of PRA for airborne camera and assess the validity of our proposition. In this method we use collimator, angle measuring instrument, 6 dof motion simulator, optical surface plate, leveling laser, inclinometer and poster(for alignment).

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.212-221
• /
• 2003

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. A new rapid prototyping process, transfer-type variable lamination manufacturing process by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost and additional post-processing. At the same time, VLM Slicer, the CAD/CAM software for VLM-ST has been developed. In this study, algorithms for accuracy improvement of VLM-ST, which include offset and overrun of a cutting path and generation of a reference shape are developed. Offset algorithm improves cutting accuracy, overrun algorithm enables the VLM-ST process to make a shape of sharp edge and reference shape generation algorithm adds additional shape which makes off-line lamination easier. In addition, proposed algorithms are applied to practical CAD models for verification.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1046-1053
• /
• 2017

We propose a design method of high accuracy power measuring device and the method of securing the reliability of the measured data. As a design method for the development of the high accuracy power measuring device, the circuit was made by reflecting the high accuracy power measuring ICs and the CT (Current Transformer). To ensure the reliability of the power meter, we requested to the watt-hour meter certified testing organization to measure the error rate, and the error rate of active power based on the "Wattmeter Technical Standard(Revision notify 2014-283)" was measure, and the error rate was confirmed to be less than 0.1%.