• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.21-26
• /
• 2005

It is important to measure the rotational accuracy of NC lathe spindle as it affects to the qualities of all machines machined by the NC lathe using in industries. The bad rotational accuracy of NC lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of NC lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental appratus for measuring of rotational accuracy by using eddy current type gap sensors, converters, screw terminal, data acquisition board inserted in computer and software f3r data acquisition, DT VEE ver. 5.0 and then error data acquired in the rotational accuracy test of NC lathe spindle are analysed in plots and statistical treatments.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.220-228
• /
• 1999

The machining accuracy has been improved with the development of NC machine tools and cutting tools. However, it is difficult to obtain a high degree of accuracy when machining deep pocket with long end mill, since machining accuracy is mainly dependant on the stiffness of the cutting tool. To improve surface accuracy in machining deep pocket using end mill, the performance by down cut and up cut is compared theoretically and experimentally. To verify usefulness of up milling, various experiments were carried out. As a result, it is found that up milling produce more accurate surface than down milling in machining deep pocket. For effective application of up milling, various values in helix angle, number of teeth, radial depth of cut and axial depth of cut are applied in experiment.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.57-63
• /
• 2003

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

• 한국측량학회지
• /
• 제35권2호
• /
• pp.103-112
• /
• 2017

Due to the large size and high complexity of modern buildings, the interest and the studies about indoor spatial information are increasing. Previous studies related to indoor spatial information were mostly about relevant technologies, and the application of indoor spatial information has been less studied. In the present study, the public administrative work areas where indoor spatial information may be applied were identified by using a modified delphi technique. And the indoor LOD (Level of Detail) and indoor positioning accuracy for indoor spatial information applications considering user requirements was established as standards for efficiently establishing and providing services. The required LOD and positioning accuracy for services was established by reestablishing indoor LOD and positioning accuracy and classifying services with reference to those. The indoor LOD was reestablished from LOD 0 to 4 by focusing on service utilization and general recognition, and the positioning accuracy was reestablished in three levels by considering the accuracy of the present positioning technology and service utilization status.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.319-326
• /
• 1998

본 연구에서는 막대한 비용과 노력을 들여서 제작된 수치지도의 위치정확도를 실험적으로 판단하고자 하였다. 수치지도의 위치정확도 평가를 위해서 GPS와 Total Station을 이용한 현지측량을 실시하였으며, 현지측량의 성과와 수치지도를 비교함으로써 1:5,000 수치지도의 위치정확도를 판단해 보았다. 그리고, 1:5,000 수치지도의 이론적인 기대정확도와 현지 측량성과를 비교하여 향후 수치지도의 위치정확도 평가방법 및 개선을 위한 연구방향을 고찰해 보았다.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.13-21
• /
• 2005

The affected factors for an accuracy of theodolite system are not only the measurement environment of temperature, illumination, etc. but also the measurement processes of the distance between two theodolites, the distance from theodolite system to scale bar and the distance from theodolite system to targets. We have known that the best collimation distance between two theodolites and the best distance from theodolite system to scale bar is $3{\sim}4m$. This study was performed for searching the best distance from theodolite system to targets on above measurement configuration. And, we could know that the best distance from theodolite system to targets is $2{\sim}6m$ and the system accuracy could be within ${\pm}0.025mm$.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.43-48
• /
• 2007

It is important to measure the rotational accuracy of lathe spindle as it affects to the qualities of all machines machined by the lathe using in industries. The bad rotational accuracy of lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental apparatus for measuring of rotational accuracy by using eddy current type gap sensors AEC5706PS and sensors, s-06LN, data acquisition board DT9834(USB type) and software for data acquisition, DT Measure Foundry ver. 4.0.7 etc., error data acquired in the rotational accuracy test of lathe spindle are analysed in plots and statistical treatments.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.551-555
• /
• 2017

Tissue optics is a well-established and extensively studied area. In the last decades, Monte Carlo simulation (MCS) has been one of the standard tools for simulation of light propagation in turbid media. The utilization of parallel processing exhibits dramatic increase in the speed of MCS's of photon migration. Some calculations based on MCS can be completed within a few seconds. Since the MCS's have the potential to become a real time calculation method, a dynamic accuracy estimation, which is also known as history by history statistical estimators, is required in the simulation code to automatically terminate the MCS as the results' accuracy achieves a high enough level. In this work, spatial and time-domain GPU-based MCS, adopting the dynamic accuracy estimation, are performed to calculate the light dose/reflectance in homogeneous and heterogeneous tissue media. This dynamic accuracy estimation can effectively derive the statistical error of optical dose/reflectance during the parallel Monte Carlo process.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.131-137
• /
• 2007

In metal casting process, it is very difficult to predict the form accuracy of cast part and reduce repeatability error. In this study, the variations of form accuracy were measured in the process of metal cast prototyping, where RP part is manufactured from CAD model in the first, and then, wax part is cast in the vacuum environment using the RP part as master model, and finally metal prototype is cast using ceramic mold and the wax part as pattern. To investigate the variations of form accuracy, the averages and standard deviations of error distribution of the parts measured by 3D scanner were compared. It was observed that the biggest shrinkage is generated during the extraction of wax part in the second step and the biggest deterioration of form accuracy is generated during the metal part casting in the last step.

• Journal of the Korean Data and Information Science Society
• /
• 제25권6호
• /
• pp.1521-1530
• /
• 2014

The ROC analysis is considered for multiple class diagnosis. There exist many criteria to find optimal thresholds and measure the accuracy of diagnostic tests for k dimensional ROC analysis. In this paper, we proposed a diagnostic accuracy measure called the correct classification simple rate, which is defined as the summation of true rates for each classification distribution and expressed as a function of summation of sequential true rates for two consecutive distributions. This measure does not weight accuracy across categories by the category prevalence and is comparable across populations for multiple class diagnosis. It is found that this accuracy measure does not only have a relationship with Kolmogorov - Smirnov statistics, but also can be represented as a linear function of some optimal threshold criteria. With these facts, the suggested measure could be applied to test for comparing multiple distributions.