• 자동차안전학회지
• /
• 제15권1호
• /
• pp.35-44
• /
• 2023

The purpose of this study is to predict how the actual accident changes by reconstructing the accident with an Autonomous Emergency Braking system (AEB) based on the actual accident of the LTAP-OD (Left Turn Crossing Path - Opponent Direction) intersection. A virtual AEB sensor was developed, and 150 head-on collision accident reports were secured to the insurance company to reconstruct the accident. As a result of the accident type analysis, a total of 13 types of head-on collision accidents were derived, and it is the LTAP-OD intersection accident with the highest frequency. In the LTAP-OD intersection accident, the simulation was conducted by applying the virtual AEB of each vehicle, the accident rate decreased by 90% or more when the AEB of the left-turn vehicle was applied, and the accident rate decreased by 50%. In addition, the most frequent collision types in LTAP-OD accidents were the front bumper on the driver's side of a vehicle going straight and the front bumper on the passenger's side of a vehicle turning left.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.264-267
• /
• 2006

This paper describes the accident analysis by modeling the current transformer mounting in meaium voltage metal-clad switchgear(MCSG). In analyzing the accident the reconstruction at the current transformer mounting(VCB connecting guide) has to be taken into account. The accident was modelled as a 3-phase ground fault mounting between the end plate of a high voltage lines and the safety shutter at the current transformer mounting of the VCB inside the metal clad switchgear. Since the outside maintenance of the metal clad switchgear is restricted by the enclosed compartments, its circumference has to be kept clean. Through the reconstruction results, it was confirmed that the fault of the enclosed switchboard could be reduced when the shutter made of Fe material was changed into an insulation.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.182-190
• /
• 2004

This paper presents reconstruction analysis of vehicle trajectory using records of a developed black box, and results of validation tests. For reconstruction of vehicle trajectory, the black box records the longitudinal and lateral accelerations and yaw-rate of vehicle during a pre-defined time period before and after the accident. One 2-axis accelerometer is used for measuring accelerations, and one vibrating structure type gyroscope is used for measuring yaw-rate of vehicle. The vehicle's planar trajectory can be reconstructed by integrating twice accelerations along longitudinal and lateral directions with yaw-rate values. However, there may be many kinds of errors in sensor measurements. The causes of errors are as follows: mis-alignment, low frequency offset drift, high frequency noise, and projecting 3-dimensional motion into 2-dimensional motion. Therefore, some procedures are taken for error compensation. In order to evaluate the reliability and the accuracy of trajectory reconstruction results, the black box was mounted on a passenger car. The vehicle was driven and tested along various specified lanes. Through the tests, the accuracy and usefulness of the reconstruction analysis have been validated.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.100-106
• /
• 2017

Outline map is used for the description and reconstruction of the traffic accident. One way to produce the outline map is by adopting detailed measurements from the accident site such as final position of the vehicle and pedestrian, width of the road, and locations of the oil and tire marks. This method consumes large amount of time not to mention that of the production of detailed version as fine as the picture of the site. Aerial recording equipment so called HeliCam can produce an outline map that can substitute that of manual method with even faster production time and higher resolution. However, the produced picture have errors which are resulted by distortion due to the characteristics of camera and direction of the photographing. This paper provides correction of the distortion of oultline map produced by HeliCam using Adobe Photoshop and PC-Rect. The result showed resonable error range less than 6 cm(0.1%) for $60m{\times}30m$ area taken by HeliCam. The presented method develops outline map with small error, which is useful to traffic accident analysis, and traffic accident cases analyzed in this study were also.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.52-60
• /
• 2020

Usage of EDR(Event Data Recorder) report for traffic accident analysis is currently increasing due to government regulation of EDR data release. Nevertheless, a lot of investigators simply adopt by comparing the number of ignition cycles(crash) at event to the number of ignition cycles(download) without an exact judgment whether event data occurred by this accident or not. In the EDR report, besides ignition cycles, there are many factors such as event record type, algorithm active(rear/rollover/side/frontal), time between events, event severity status(rollover/rear/right side/reft side/frontal), belt switch circuit status, driver/passenger pretensioner/air-bag deployment, PDOF(Principal Direction of Force) by ΔV to be able to decide whether or not to adopt. also the event data is considered enough to vehicle damaged state, accident situation at the scene of the accident. and there is described in "all data should be examined in conjunction with other available physical evidence from the vehicle and scene" in the CDR(Crash Data Retrieval) report. Therefore many investigators have to decide whether or not to adopt after they consider sufficiently to above factors when they are the traffic accident analysis and investigate the causes of a accident on the adopted event data. In this paper, we report to traffic accident investigators notable points and analysis methods on the basis of thousands of cases and the results of one's own experiment in NFS(National Forensic Service).

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.82-91
• /
• 2011

In this paper, a planar model for mechanics of a vehicle/pedestrian collision incorporating road gradient is derived to evaluate the pre-collision speed of vehicle. It takes into account a few physical variables and parameters of popular wrap and forward projection collisions, which include horizontal distance traveled between primary and secondary impacts with the vehicle, launch angle, center-of-gravity height at launch, distance from launch to rest, pedestrian-ground drag factor, the pre-collision vehicle speed and road gradient. The model including road gradient is derived analytically for reconstruction of pedestrian collision accidents, and evaluates the vehicle speed from the pedestrian throw distance. The model coefficients have physical interpretations and are determined through direct calculation. This work shows that the road gradient has a significant effect on the evaluation of the vehicle speed and must be considered in accident cases with inclined road. In additions, foreign/domestic empirical cases and multibody dynamic simulation results are used to construct a least-squares fitted model that has the same structure of the analytical one that provides an estimate of the vehicle speed based on the pedestrian throw distance and the band within which the vehicle speed would be expected to be in 95% of cases.

• 대한교통학회지
• /
• 제32권5호
• /
• pp.503-512
• /
• 2014

본 논문에서는 펑크 타이어 힘 시험 연구 결과들을 다양하게 수집하고 분석하여, 펑크(blow-out) 타이어 차량 동적 거동 해석을 위한 구름저항력(rolling resistance), 셀프 얼라이닝 토크(self aligning torque), 코너링 강성(cornering stiffness), 반경방향 강성(radial stiffness)과 같은 관련 계수들의 적정값을 추정하였다. 이러한 타이어 펑크 관련한 입력계수들을 자동차 사고 해석 상용 프로그램에서 설정하여 타이어 펑크 효과를 구현한 시뮬레이션 해석을 수행하였다. 그리고, 정상 차량들 간의 다양한 충돌 형태들과 속도 등을 참조하여, 펑크 차량의 충돌 유형들을 구성하고 시뮬레이션 해석을 수행하여 충돌 특성을 구하였다. 본 연구에서 제시하는 타이어 펑크 혹은 손상에 대한 고려는 보다 신뢰성 있는 자동차 사고 재구성에 기여할 수 있을 것이다.

• 대한교통학회지
• /
• 제29권1호
• /
• pp.125-134
• /
• 2011

보행자-차량 충돌사고 재구성을 위하여 본 논문에서는 사고 현장에서 수집이 용이한 정보들을 활용하여 차량의 충돌 속도를 정확하게 추정할 수 있는 퍼지 도구를 제시한다. 200건이 넘는 국내외 사고 및 실험 자료와 700건의 다중물체 시뮬레이션 결과에 근거하여 퍼지규칙과 소속함수들을 설정하였다. 개발한 퍼지도구는 4개의 소속함수와 2개의 논리적 규칙을 사용하여 보행자 선회 궤도 유형과 차량의 충돌 속도를 추론한다. 보행자 전도거리의 소속함수는 이와 같이 추론된 궤도 유형에 따라 달리 구성하였다. 작성된 퍼지 프로그램은 국내외 실제 사고 및 실험 데이터를 활용하여 그 결과를 검증하였으며 차량의 충돌속도에서 좋은 일치를 보여주었다. 이는 본 연구를 통하여 개발한 퍼지도구의 정확성과 유용성을 입증하는 것이다.

• 도시과학
• /
• 제8권1호
• /
• pp.33-44
• /
• 2019

The purpose of this study is to investigate the cause of repeated accidents through the investigation and analysis of the collapse cases of domestic earthquakes in order to prevent the earthquake disaster in the urban redevelopment and reconstruction. It is designed and constructed to draw out various problem factors and to find solutions to these problems. And the contents related to various laws and systems of the construction project management stage. Especially. In the management of the construction management centered on the safety management and quality control of the technical aspect design, supervision, construction phase through the cause of the accident and improvement measures based on the investigation report of the collapse of the construction site near Sangdo Kindergarten in Seoul. Supervisor. And constructors should be settled on the responsibility and responsibility of God. In order to achieve the purpose of the project, a system is established to link worker-centered occupational safety and health management with technology-based safety construction management, and analysis of how the quality control of the earthquake prevention affects safety construction management The purpose of this study is to prepare the optimum management plan of construction business.As a result of this study, it is aimed to accomplish the purpose of small scale redevelopment and reconstruction construction project by providing optimization method in the stage of construction project management in order to prevent collapse caused by differences in design,Is expected.

• 자동차안전학회지
• /
• 제13권3호
• /
• pp.78-85
• /
• 2021

Recently a traffic accident of heavy duty vehicles under the mandatory installation of ADAS (Advanced Driver Assistance System) is often reported in the media. Heavy duty vehicle accidents are normally occurring a high number of passenger's injury. According to report of Insurance Institute for Highway Safety, FCW (Forward Collision Warning) and AEB (Automatic Emergency Braking) were associated with a statistically significant 12% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 41% reduction in the rear-end crash rate of large trucks. Also many countries around the world, including Korea, are studying the effects of ADAS installation on accident reduction. Traffic accident statistics of passenger vehicle for business purpose in TMACS (Traffic safety information Management Complex System in Korea) tends to remarkably reduce the number of deaths due to the accident (2017(211), 2018(170), 2019(139)), but the number of traffic accidents (2017(8,939), 2018(9,181), 2019(10,095)) increases. In this paper, it is introduced a traffic accident case that could lead to high injury traffic accidents by being equipped with AEB in a bus. AEB reduces accidents and damage in general but malfunction of AEB could occur severe accident. Therefore, proper education is required to use AEB system, simply instead of focusing on developing and installing AEB to prevent traffic accidents. Traffic accident of AEB equipped vehicle may arise a new dispute between a driver's fault and vehicle defect. It is highly recommended to regulate an advanced event data recorder system.