• 제목/요약/키워드: Accident Occurrence

검색결과 529건 처리시간 0.024초

네트워크 GR형 수신기와 컨트롤데스크를 이용한 통합방재관리시스템에 대한 연구 (The Study on the Integrated Emergency Management System using Network GR-type Receiver and Control Desk)

  • 백동현;송호빈;강원선
    • 한국화재소방학회논문지
    • /
    • 제26권1호
    • /
    • pp.96-101
    • /
    • 2012
  • 근래의 건축물들은 고층화와 지하 심층화되고 있어 화재 발생 시 대형 사고의 가능성이 매우 높으므로 여러 장소에 개별적으로 설치되어 있는 화재수신기의 방재정보를 통합하여 관리할 필요가 있다. 본 논문에서는 각각 떨어진 장소에 설치된 화재수신기에 대해 원격으로 감시 및 제어 가능하며 인터넷과 광케이블로 연결 할 수 있는 네트워크형 화재수신기와 컨트롤데스크를 제작한 다음 각 장치 간에 화재발생 및 이상상태를 감시하고 상황에 따라 모니터링, 경보, 제어 및 유지관리를 수행 할 수 있는 통합관리시스템을 개발하였다. 제안한 시스템을 국가검정기준에 의하여 평가하고, 각 구간의 신호 전달 시간에 대해 실험을 수행하여 성능의 안정성을 확인하였다.

초보 운전자에 의한 보행자-차량 교통사고의 심각도 영향 요인 분석 (Factors Affecting Injury Severity in Pedestrian-Vehicle Crash by Novice Driver)

  • 최새로나;박준형;오철
    • 대한교통학회지
    • /
    • 제29권4호
    • /
    • pp.43-51
    • /
    • 2011
  • 교통사고는 단일요인에 의해 발생하기도 하지만 대부분 다양한 요인이 복합적으로 작용하여 교통사고의 사후분석시 명확한 인과관계를 규명하는데 어려움이 있다. 본 연구에서는 초보운전자에 의한 교통사고를 대상으로 교통사고의 심각도에 영향을 주는 요인들에 대해 분석하였다. 사고발생 시 인명피해가 큰 보행자-차량 교통사고의 사고 심각도를 종속변수로 설정하고 사고 심각도의 증가에 유의한 영향을 미칠 것으로 판단되는 성별, 연령, 교통법규위반 횟수, 교통사고위치 등의 운전자 특성에 관련된 각종 변수들을 독립변수로 설정하여 운전자 운전 경력에 따라 분류하였다. 이항 로지스틱 회귀분석(BLR)을 적용하여 운전경력별 사고심각도 영향 요인을 도출하였다. 분석결과, 운전경력 그룹에 관계없이 운전자 연령, 교통법규위반 횟수, 교통사고위치가 보행자-차량 교통사고 심각도 증가에 영향을 미치는 것으로 나타났다. 본 연구에서 제시한 교통사고 심각도에 영향을 미치는 운전자 특성은 향후 운전자 인적 특성과 더불어 도로환경 및 차량관련 요소에 관련된 교통사고 심각도에 영향을 미치는 요인 분석에 효과적으로 사용될 것으로 기대된다.

안개발생시 운전자의 안전을 위한 멀티센서 기반의 차량 안전 시스템 설계 (Design of Vehicle Safety System based on Multi-sensor for Driver's Safety to Fog)

  • 박건영;전민호;오창헌
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.837-839
    • /
    • 2012
  • 안개가 발생하였을 시 운전자는 시야가 확보되지 않아 운전에 어려움을 가지게 되고 이 경우 교통사고의 발생 확률이 매우 높다. 이러한 사고를 줄이고 운전자의 안전을 확보하기위한 방안으로는 운전자에게 현재의 상황을 인지하여 서비스를 제공하는 것이다. 본 논문에서는 안개가 발생할 경우 사고를 방지하기 위해 차량 안전 시스템을 이용하여 적절한 경고 및 제어를 하는 시스템을 제안한다. 제안하는 시스템은 차량외부에 설치된 습도, 조도 센서로부터 수집된 정보를 자동차 내부의 안개검출 시스템 컨트롤러에서 조건을 확인한 후 영상장비를 이용하여 최종적으로 안개가 발생하여 운전자의 시야가 확보되지 않을 경우 이벤트를 발생시키는 시스템이다.

  • PDF

설계 안전성 검토에 의해 선정된 공법의 공기와 공사비 영향 분석 - 외벽 바탕 구조물 공법 사례를 중심으로 - (Effect Analysis of Duration and Costs According to Construction Method Selected by Design for Safety - Focused on Structural Frame for Exterior Wall Cladding -)

  • 김민규;김진동;이영도;김광희
    • 한국건축시공학회지
    • /
    • 제20권3호
    • /
    • pp.297-304
    • /
    • 2020
  • 건설안전사고 발생을 근본적으로 축소하기 위해 설계단계 설계안전성 검토를 도입해 시행하고 있다. 따라서 본 연구에서 안전을 고려한 설계를 위해 선정된 공법이 안전사고를 줄일 수 있으나 공기와 공사비에 미치는 영향을 검토하여 여러 측면의 효과를 확인하고자 하였다. 추락재해 요인을 내포하고 있는 건물외벽 마감재 바탕 구조물 시공공법을 안전을 고려해 선정한 후 공기와 공사비 측면에서 비교분석하였다. 그 결과 안전뿐만 아니라 공기나 공사비 측면에서도 효과가 있는 것으로 나타났다. 따라서 설계단계 설계안전성 검토에 의해 선정된 공법이 프로젝트 전체에 긍정적인 영향을 미칠 것으로 사료된다.

로제카이와의 놀이론을 통한 가상성의 디지털 놀이 유형 연구 (A Study on Digital Play Types of Virtuality through the Play Theory of Roger Caillois)

  • 이태은;정진헌
    • 디지털융복합연구
    • /
    • 제16권9호
    • /
    • pp.383-390
    • /
    • 2018
  • 본 연구의 목적은 가상성의 디지털 놀이 발전방향과 디지털 놀이 도구가 기존 놀이의 속성과 어떻게 결합되어 유형화되고 있는지 알아보는데 있다. 가상성 특성과 놀이론을 살펴보고 사례를 4가지 유형으로 도출하여 로제카이와의 4가지 놀이 속성으로 분석하였다. 분석결과 아곤의 경우 상호경쟁 대상이 단수와 복수, 컴퓨터 및 미래의 자신 등으로 확대되고 있다. 미미크리는 온-오프라인의 경계를 넘나들고 분절과 경계의 모호 양상을 보였다. 알레아는 즉시성과 동시성에 의한 우연 발생의 다양화가 강화되고 있다. 일링크스는 몰입의 극대화를 감각과 도구로 다양하게 적용하며 새로운 가상성 기술의 개발과 실험이 지속되고 있다. 결과적으로 다양한 융합적 결합에 의한 시공간의 확장성과 공존성 경향으로 놀이가 발전하고 있었다. 본 연구는 디지털 놀이 관련 연구와 디지털 놀이 기획개발에 도움이 되고자 하며 향후 가상성을 활용한 스토리 테마형 디지털 놀이터 기획설계에 관한 연구를 진행 예정이다.

해양안전심판원의 인적구성의 문제점 및 개선방안 (Problems and Ways of Improving on Personal Organization of Maritime Safety Tribunal)

  • 이종근
    • 수산해양교육연구
    • /
    • 제25권3호
    • /
    • pp.564-579
    • /
    • 2013
  • The purpose of Maritime Safety Tribunal is that experts about ship operation investigate and reveal causes of marine disasters and suggest plans to prevent recurrence in Korean Maritime Safety Tribunal which is a kind of administrative court. Despite the fact that 72% of marine disasters is fishing vessel accidents and 75% of collision accidents between vessels which most occur is related to fishing boats, it is the very serious problem that there is no any person with licenses of marine technicians for fishing vessels in judges and investigators of Korean Maritime Safety Tribunal. The operational characteristics of fishing vessels, their sizes, and shift patterns of duties in wheelhouses are completely and incommensurably different from those of merchant vessels. By the way, if the investigators and judges who just consist of merchant vessel experts investigate and judge marine accidents about fishing vessels, there could be errors in establishment of policies to investigate and reveal their causes and prevent recurrence of accidents. Especially, in case of collision accidents between fishing vessels and merchant vessels, it is thought that the marine accident interested provides causes which can be doubtful about fairness of judges. Therefore, it is thought that the ratio of judges and investigators is most desirable to compose it to be similar to the occurrence frequency of marine accidents. For this, the following solution plans are suggested. First, qualification for appointment requires first class marine technicians. But there is the only one vessel which needs the first class in fishing vessels. Therefore, it is thought that the provisory clause should be added so that the second class marine technicians can be used instead of the first class ones. Second, the marine accidents of fishing vessels reach 72% but the fact that there is no any judge and investigator with licenses of marine technicians for fishing vessels is thought to go against the purpose of establishment of Korean Maritime Safety Tribunal. Therefore, it is thought that there is, at least, one more judges and investigators in the central and local Korean Maritime Safety Tribunals. The same method should be applied to judge assistants and investigation assistants.

배관의 신축이음에서의 유동해석을 통한 융합기술연구 (Study on Convergence Technique through Flow Analysis at the Flexible Joint of the Pipe Laying)

  • 이정호;조재웅
    • 한국융합학회논문지
    • /
    • 제6권3호
    • /
    • pp.13-18
    • /
    • 2015
  • 본 논문은 신축이음으로 배관과 배관사이에 연결되어 압력과 온도를 조절하는 이음의 안전설계에 관한 연구이다. 본 연구의 목적은 외기와 수송유체의 압력으로 인한 팽창과 수축에 의한 파이프 손상의 문제를 해결하고자 하여 파이프에 작용하는 과중한 압력을 감소시키고 사고발생을 예방하고자 하고자 한다. 3가지 유형의 신축이음을 적용하여 각각의 모델의 유동특성을 시뮬레이션 해석을 통하여 관찰한다. 각각의 모델의 형상에 따라 슬리브형, 벨로우즈형, 루프형의 신축이음 특성을 분류한다. 또한 수송 유체가 신축이음을 통과할 때, 배관에서의 열과 압력, 속도의 유동특성을 분석한다. 본 연구의 결과를 이용하면 신축이음 형상에 따른 안전설계에 기여할 수 있을 것으로 판단된다. 또한, 디자인 면에서 융합 기술로의 접목도 가능하여 미적인 감각을 나타낼 수 있다.

서울지역 외상성 척수손상환자의 발생률 추정 및 발생관련요인 (Estimation of Incidence Rate and Factors Related to Occurrence of Traumatic Spinal Cord Injury in Seoul)

  • 정낙수;정치경;이원철
    • 한국전문물리치료학회지
    • /
    • 제6권2호
    • /
    • pp.1-15
    • /
    • 1999
  • For the purpose of disclosing estimated annual incidence rate and causative factors of traumatic spinal cord injury and obtaining basic data for the establishment of effective measures to prevent this injury, the medical record of 204 cases of Seoul residents with spinal cord injury which admitted in 46 general hospitals and National rehabilitation center located in Seoul, including Sam Yook Rehabilitation Center and Jung Ang Hospital in Kyungi do and occurred in 1995 were analyzed. The results were as follows: 1) The estimated annual incidence rate of traumatic spinal cord injury in 1995 of Seoul residents was 20.5 per million population. This incidence rate was the highest in the 40th years (34.1), followed by in the 50th years (26.5) and in the 20th years (25.6) in descending order. 2) The incidence rate ratio between male and female was 3.5:1. 3) The leading cause of injury was the highest in traffic accidents (42.2%), followed by falls from elevation (29.4%) and falls on the same level (9.8%). 4) Traffic accident mainly occured from 20th years to 40th years and falls from elevation in 50th years. 5) The level of spinal cord injury was the highest in cervical cord (63.2%), followed by the thoracic cord (21.1%) and lumbosacral cord (15.7%). Traffic accidents mainly caused in cervical cord injury whereas thoracic cord injury and lumbosacral cord injury were caused from falls from elevation. Above theconsiderations in mind, it suggested that in order to prevent traumatic spinal cord injuries, safety education of falls from elevation should be focused on the 20th years and 50th years male, moreover safety education of traffic accidents will be needed in the 30th years and 40th years male.

  • PDF

차량 전복 방지 장치를 위한 실시간 차량 질량 추정 시스템 (Real-Time Vehicle Mass Estimator for Active Rollover Prevention Systems)

  • 한광진;김인근;김승기;허건수
    • 대한기계학회논문집A
    • /
    • 제36권6호
    • /
    • pp.673-679
    • /
    • 2012
  • 차량의 롤오버는 심각한 사고중의 하나로 SUV 에 있어서 더욱 위험하나 롤오버 방지시스템을 통하여 발생을 최소화 시킬 수 있다. 하지만 이러한 방지 시스템의 성능은 승객 수나 다른 하중 조건에 따라 변하는 차의 질량이나 무게중심 같은 차량 관성 파라미터에 매우 민감하다. 본 논문에서는 이러한 문제점을 개선하기 위하여 종 방향, 횡 방향, 수직 방향 동역학을 기반으로 한 세 가지 질량 추정 알고리즘을 개발하고 이 세 가지 알고리즘들을 통합하여 임의의 주행 상황에서 실시간 연산을 통해 차량의 질량을 추정할 수 있는 통합 차량 질량 추정 방법을 제안하였다. 또한 실시간 시뮬레이션과 실험을 통하여 이 방법의 성능을 검증하였다.

Comparison of Relative Risk before and after SEMI S2-93A Implementation: Using a Semiconductor Plant in a Taiwan's Science Park as an Example

  • Tien, Shiaw-Wen;Chung, Yi-Chan;Tsai, Chihj-Hung;Hwang, Guo-Ji
    • International Journal of Quality Innovation
    • /
    • 제6권1호
    • /
    • pp.58-73
    • /
    • 2005
  • The objective of this study is to evaluate the equipment risk before and after SEMI S2-93A implementation, thus providing a guideline for safety improvement. Semiconductor Plant A located in Taiwan's Hsinchu Science Based Industrial Park with 147 manufacturing machines was used for risk assessment. This study was carried out in three steps. First, a preliminary hazard analysis was conducted. A detailed process safety evaluation was conducted (Hazard and Operability Study, HAZOP); and finally, the equipment risk comparison before and after Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation. The preliminary hazard analysis results showed high risk in 21.77% of the manufacturing machines under risk assessment at Plant A. The largest percentage existed in the Diffusion Department. The machine types specified by the hazardous work site review and inspection according to Article 26 of Labor Inspection Regulation (the machines that use such chemicals as, $SiH_4$, HF, HCL, etc. and that are determined to be highly hazardous through preliminary hazard analysis) were added to the detailed process analysis and evaluation. In the third part of this evaluation, the machines at Plant A used for detailed process safety assessment were divided into two groups based on the manufacturing data before and after 1993. The severity, possibility, and actual accident analysis before and after SEMI S2-93A implementation were compared. The Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation can reduce the severity and possibility of hazard occurrence.