• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.103-113
• /
• 2015

Objective: This study proposes a systematic process to present the analysis methods and solutions of organizational root causes to human errors on the railroad. Background: In fact, organizational root cause such as organizational culture is an important factor in the safety concerns on human errors in the nuclear power plant, railroad and aircraft. Method: The proposed process is as follows: 1) define analysis boundary 2) select human error taxonomy 3) perform accident analysis 4) draw root causes with FGI 5) review root causes analysis with survey 6) chart analysis of root causes, and 7) propose alternatives and solutions. Results: As a result, root causes of the organizations like railroad and nuclear power plant came from the educational problems, violations, payoff system, safety culture and so forth. Conclusion: The proposed process does predict potential railroad accident through retrospect error analysis by building new human error taxonomies and problem solution. Application: This study would contribute to examination of the relationship between human error-based accidents and organizational root causes.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.4
• /
• pp.203-213
• /
• 2005

Purpose: To assess the environmental hazards of falling accident in the homes of the elderly. Method: 222 homes of the elderly were assessed by the home environmental Checklist from May to July in 2003. Results: The mean score of home environmental hazards for fall were 13.19 with the highest score being 49, ranging from 4 to 24. The bathroom was the most hazardous place in the home, porch came next bedroom, kitchen, living room and stair followed them. The floor surface such as finishes and non-skid mats was the most hazardous interior factor in the home, using bathroom came next furniture and illumination followed them. The floor surface such as finishes and non-skid mats in the bathroom, kitchen, living room and porch, illumination of bedroom and stair were the most prevalent hazards in the home of interior. Of the 49 potential hazards, bathroom grab bar was the most prevalent one with 89.9%, and non-skid rugs in the porch, bathroom and kitchen, safety of dinner table, the threshold and furniture of porch, and illumination of bedroom were prevalent more than half of the home under assessing. Men, living in the separate house or villa with stairs were in more hazardous environments. Conclusion: To reduce the potential hazards of fall accident in the home, improving hazards relating to floor surface such as slip resistance surface and mats is important specially those of the separate house or villa with stairs.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.451-462
• /
• 2015

Safety is the first priority in civil aviation, and so the International Civil Aviation Organization (ICAO) has introduced and mandated the use of Safety Management Systems (SMS) by airlines, airports, air traffic services, aircraft maintenance organizations, and training organizations. The aircraft manufacturing industry is the last for which ICAO has mandated the implementation of SMS. Since SMS is a somewhat newer approach for most manufacturers in the aviation industry, they hardly believe in the value of implementing SMS. The management of safety risk characteristics that occur during early aircraft development stages and the systematic linkage that the safety risk has to do with an aircraft in service could have a significant influence on the safe operation and life cycle of the aircraft. This paper conducts a case analysis of the McDonnell Douglas MD-11 accident/incident to identify the root causes and safety risk levels, and also verified why aircraft manufacturing industry should begin to adopt SMS in order to prevent aircraft accident.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.3
• /
• pp.138-145
• /
• 2004

The clinical features and therapeutic results of alopecia areata are variable and unpredictable. For example, genetic, psychic, immunologic factors are regarded as the reason of alopecia areata. For the relationship between alopecia and whiplash injury, Dr. Guun explained that whiplash injury by the traffic accident produces cervical muscle spasm, and it makes autonomic nerve change. The tropical changes accompanied with ischemic change of scalp vessels made by this mechanism cause alopecia areata. And Yesudian reported the case of scalp alopecia as the result of ischemic change following traffic accident. We have experienced a 25-year-old woman with Alopecia areata following whiplash injury by traffic accident, and who had no risk factor of it. The patient was treated by acupuncture and physical treatment. Her hair loss, cervical angle and pain were improved through acupuncture treatment. This case of alopecia areata following whiplash injury is uncommon, so we report the mechanism of it, but should collect more cases and observations.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.11 no.2
• /
• pp.62-66
• /
• 2015

Temporomandibular joint dislocation causes considerable pain, discomfort, and swelling. The anatomic construction of the articular fossa and the eminentia articularis may predispose to dislocation, and weakness of the connective tissue forming the capsule is believed to be a predisposing factor. The capsule may be stretched and, more rarely, torn. Dislocation may be unilateral or bilateral and may occur spontaneously after stretching of the mouth to its extreme open position, such as during a yawn or during a routine dental operation. Manual reduction with the patient under muscle-relaxing condition or anesthesia is recommended method. After the reduction of an acute dislocation, immobilization of the jaw is recommended to allow the stretched and sometimes torn capsule to heal, thus preventing recurrence. A Barton's bandage may be applied for 2 to 3 weeks to prevent the patient from opening the jaw too wide. But, it results in recurrent dislocation in the neurologically disabled patient, because of loose intermaxillary fixation. This is a case report about management of recurrent temporomandibular joint dislocation by multiple loop wirings and intermaxillary elastics in cerebrovascular accident patient.

• Research in Community and Public Health Nursing
• /
• v.18 no.4
• /
• pp.643-650
• /
• 2007

Purpose: This study was to obtain information regarding to agricultural accidents in farm workers in the Kyungpook area. Methods: A questionnaire survey was carried out for 528 workers from the 1st to 31st of March, 2007. Frequency, percentage, mean and chi-square test with the SPSS program were used to analyze the data. Results: The causes of agricultural accidents include falling(29.0%), overseeing(18.9%), traffic accident(17.4%), putting between machinery(11.7%), crashing(5.3%), fire (0.6%) in the order of frequency. Injuries from agricultural accidents include fracture(44.7%) cerebral bleeding (10.4%), amputation(7.0%), airway obstruction (2.3%) burn(1.9%), drug addiction(1.9%) in the order of frequency. The largest proportion of the subjects of hospital treatment were in their 50s and belonged to the group of high-level economic state. Agricultural machinery collision was the most frequent cause among the subjects of hospital treatment. Conclusion: These results suggest that carelessness can be a potential risk factor for agricultural accidents in farm workers. These findings may give useful information for developing agricultural accident prevention programs for farm workers.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2023

Defects in the vehicle itself were considered the biggest risk factor for traffic accidents as the electrical and electronic components of vehicles, which were not there before, increase. Therefore, the vehicles have been developed based on ISO 26262 (an international functional safety standard) which is focusing on functional defect safety evaluation of electrical and electronic component systems. However, in the future, as autonomous driving technology is applied, even vehicles without functional defects must be prepared for the dangerous traffic situation that may arise from exceptional or external factors. SOTIF (Safety Of The Intended Functionality) is a concept to prevent exceptional or external factors. The main objective of SOTIF is to decrease Unknown & Unsafe factors as much as possible by finding Known factors and Unsafe factors. In this study, Prescan provided SIEMENS, one of the autonomous driving simulators, is used to make scenarios of IGLAD traffic accident cases. From the simulation results, Unsafe & Safe cases were classified and analyzed to derive unsafe factors.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4266-4273
• /
• 2023

In a severe reactor accident, a crust will form on the surface of the molten material during the core melting process. The crust will have a contact melting with the internal components of the reactor. In this paper, the contact melting process of the molten material on the austenitic stainless steel plate bundles is studied. The contact melting model of parabolic molten material on the plate bundles is proposed, and the rule and main effect factors of the contact melting are analyzed. The results show that the melting velocity is proportional to the slope of the paraboloid, the heat flux and the distance between two plates D. The influence of melt gravity and the plate width on melting velocity is negligible. The thickness of the molten liquid film is proportional to the heat flux and plate width, and it is inversely proportional to the gravity. With the increase of D, the liquid film thickness decreases at first and then increases gradually. The liquid film thickness has a minimum against D. When the width of the plate is small, the width of the plate is the main factor affecting the thickness of the liquid film. The parameters are coupled with each other. In a severe reactor accident, the wider internal components of reactor, which can increase the thickness of the melting liquid film and reduce the net input heat flux from the molten material to the components, are the effective measures to delay the melting process.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.15-20
• /
• 2008

At the choice of aviation company, safety appears as biggest variable than expenses, speed and comfort so these are concerned not only aviation companies but also countries and customers. Until now, ICAO has been making effort to reduce the flight accident through the safety advice of aviation part, establishment of standard, education, training and develop of navigation aids. Especially in 2008, they emphasize that the flight accident is reduced through researches and applications about SMS as safety regulation. Important primary factor to give influence about promotion of SMS is practice of organization and for this, to investigate recognition about safety management and culture of members. At point of this, this research analyze the recognition degree about how to manage safety and SMS for pilots an mechanics of Korea.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.91-97
• /
• 2005

The purpose of this study is to provide basic data for establishment of prevention counterplan against construction accidents in preparation for variation of climate conditions. In order to execution of this study, it was analyzed relations of climate factors and cases of construction accident occurred construction sites. In occurrence of construction accidents inducing death upon variation of Climate factors, precipitation and wind velocity were not related directly to construction accidents inducing death. On the other hand, the more temperature and humidity are high, the more construction accidents inducing death occurred. Especially, when temperature and humidity are above $24^{\circ}C,\;70\%$ respectively, field managers must pay attention to safety management of construction sites.