• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.1003-1008
• /
• 2016

Recently hospitals have divided into many divisions, specialized the medical service, and shown organic cooperation, all to provide patients with various and high quality medical service. They have also showed improvement in information protection by introducing an information protection system to regulate the access to patients' medical and personal information. The purpose of this paper is to present a case study to implement of a limited hospital medical information system that can regulate the access to medical information. For this, a router-based virtual network applying an ACL(: Access Control List) to regulate access to information was made using a packet tracer.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.409-412
• /
• 2007

Demand for the technology for access to device control network in industry and for access to building automation system via internet is on the increase. In such technology integration of a device control network with a data network such as internet and organizing wide-ranging DCS(distributed control system) is needed, and it can be realized in the framework of VDN(virtual device network). Specifications for device control network and data network are quite different because of the differences in application. So a router that translates the communication protocol between device control network and data network, and efficiently transmits information to destination is needed for implementation of the VDN(virtual device network). This paper proposes the concept of NCS(networked control system) based on VDN(virtual device network) and suggests the routing algorithm that uses embedded system.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.339-342
• /
• 2011

This paper proposes a network-based mobility control scheme in wireless/mobile networks, which is based on the Locator-Identifier Separation Protocol (LISP). Compared to the existing LISP mobility scheme, the proposed scheme is featured by the following two points: 1) each LISP Tunnel Router (TR) is implemented at the first-hop access router that mobile nodes are attached to, and 2) for handover support, the LISP Routing Locator (RLOC) update operation is performed between Ingress TR and Egress TR. By numerical analysis, it is shown that the proposed scheme can reduce the handover latency much more than the other candidate schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1594-1597
• /
• 2005

A rapid development and a wide use of the Internet have expanded a network environment. Further, the network environment has become more complex due to a simple and convenient network connection and various services of the Internet. However, the Internet has been constantly exposed to the danger of various network attacks such as a virus, a hacking, a system intrusion, a system manager authority acquisition, an intrusion cover-up and the like. As a result, a network security technology such as a virus vaccine, a firewall, an integrated security management, an intrusion detection system, and the like are required in order to handle the security problems of Internet. Accordingly, a router, which is a key component of the Internet, controls a data packet flow in a network and determines an optimal path thereof so as to reach an appropriate destination. An error of the router or an attack against the router can damage an entire network. This paper relates to a method for RSMS (router security management system) for secure networking based on a security policy. Security router provides functions of a packet filtering, an authentication, an access control, an intrusion analysis and an audit trail in a kernel region. Security policy has the definition of security function against a network intrusion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2174-2177
• /
• 2003

Internet is exposed to network attacks as Internet has a security weakness. Network attacks which are virus, system intrusion, and deny of service, put Internet in the risk of hacking, so the damage of public organization and banking facilities are more increased. So, it is necessary that the security technologies about intrusion detection and controlling attacks minimize the damage of hacking. Router is the network device of managing traffic between Internets or Intranets. The damage of router attack causes the problem of the entire network. The security technology about router is necessary to defend Internet against network attacks. Router has the need of access control and security skills that prevent from illegal attacks. We developed integrated security management framework for secure networking and kernel-level security engine that filters the network packets, detects the network intrusion, and reports the network intrusion. The security engine on the router protects router or gateway from the network attacks and provides secure networking environments. It manages the network with security policy and handles the network attacks dynamically.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.190-197
• /
• 2010

The ACR (Access Control Router) of WiBro processes location registration of the Correspondent Node and Home Agent as the Correspondent Node moves between ACRs. Therefore, the location update cost is low compared with MIPv6. However, all packets which are sent and received are sent through the ACR, so as the number of mobile nodes that are managed by the ACR increases, the cost of packet delivery also increases. Therefore, the communication state of the ACR domain remains smooth when the ACR which manages the mobile node in the ACR domain has good performance. However, network delays occur unless the ACR performs well, so the role of the ACR is important. In this paper, we analysis performance of the ACR for efficient realization of the WiBro standard. By using the Deny Probability and the Total Profit of ACR performance and apply it to the Random Walk Mobility model as the mobility model.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.79-87
• /
• 2010

This paper proposes a L3 handover method to minimize packet loss for supporting service continuity to IMS Terminal which has a single WLAN interface. The existing IMS based handover solution is able to support handover between different access networks in case that a terminal has multiple interfaces. That is, WLAN terminals need multiple interfaces to connect with one or more access networks. This proposed method configures IP address for the terminal in target WLAN previously by using Candidate Access Router Discovery(CARD) mechanism. Also, in the proposed method, service continuity server performs L3 connection establishment in target WLAN and registration to IMS server instead of the terminal. And then session control mechanism based on SIP is performed to support service continuity. We analyzed handover latency and signaling cost in the proposed method and existing method to show the improved performance by the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.130-137
• /
• 2012

In this paper, we propose core and edge router architectures with LPI(Low Power Idle) for reducing energy consumption in OBS networks. The proposed core router architecture is comprised of a BCP switch, a burst switch, line cards and sleep/wake controller for LPI. When the offered load of network is low, sleep/wake controller can change the state of the core router line card from active to sleep state for saving the energy after receiving network control packet. The edge router consists of a switch for access line card, a SCU and OBS edge router line cards. The LPI function in edge router line card is performed through network level control by network control packet, individually. Additionally, PHY/transceiver modules can transition active state to sleep state when burst assemble engine generates new bursts. To evaluate the energy saving performance of proposed architecture with LPI, the power consumption of each router is analyzed by using data sheet of commercial router and optical device. And, simulation is also performed in terms of sleep time of PHY/Transceiver through OPNET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.375-381
• /
• 2018

As smart home network services such as home CCTV, outdoor control of home appliances, home security and disaster prevention services become popular, there appear various affiliated products including smart home gateway and smart speaker. Since those services are generally developed on the vendors' individual hardware and software platforms, it is not much expected for them to interwork well among different architecture and communication methods. In this paper, we propose a new home network service system running on an open source platform to address such issues. We implemented a home network system using OpenWRT-based wireless router(or access point) and Zigbee communication technology. In the proposed system, a wireless router replaces a commercial home gateway and small control units implemented with Arduino control electronic devices and sensors in home. Several service scenarios are also implemented to verify the operability of the proposed system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.118-125
• /
• 2006

Mobile nodes in FHMIPv6 has both advantages of HMIPv6 protocol which reduces signaling delay time and resource consumption during a handover and fast handover algorithm which reduces packet loss. Fast handover algorithm can reduce packet loss by 'tunneling' method ; that transmits a packet from old access router to new access router in case of handover. However, the fast handover algorithm can cause a reordering problem in a receiver between packets tunneled from the previous access router and packets transmitted directly to the new access router, which could degrade the TCP performance due to congestion control. In this paper, we propose two algorithms to solve the reordering problem in fast handover. The first one uses a holding timer for tunneling, the other adds a new algorithm to routers that adopt snoop protocol. We compare the performance of the proposed reseuquencing algorithms with that of the existing FHMIPv6 protocol by simulation. The simulation results show that the proposed algorithms solve the reordering problems and enhance TCP performance by preventing TCP sender entering congestion control.