• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.69-80
• /
• 1999

Recently, social requirements of personal identification techniques are rapidly expanding in a number of new application ares. Especially fingerprint recognition is the most important technology. Fingerprint recognition technologies are well established, proven, cost and legally accepted. Therefore, it has more spot lighted among the any other biometrics technologies. In this paper we propose a new on-line fingerprint recognition algorithm for non-inked type live scanner to fit their increasing of security level under the computing environment. Fingerprint recognition system consists of two distinct structural blocks: feature extraction and feature matching. The main topic in this paper focuses on the feature matching using the fingerprint minutiae (ridge ending and bifurcation). Minutiae matching is composed in the alignment stage and matching stage. Success of optimizing the alignment stage is the key of real-time (on-line) fingerprint recognition. Proposed alignment algorithm using clique shows the strength in the search space optimization and partially incomplete image. We make our own database to get the generality. Using the traditional statistical discriminant analysis, 0.05% false acceptance rate (FAR) at 8.83% false rejection rate (FRR) in 1.55 second average matching speed on a Pentium system have been achieved. This makes it possible to construct high performance fingerprint recognition system.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.53-65
• /
• 2007

PACS has been run at the Kyung Hee University Medical Center(KHMC) since 2001, and the installation and operation of PACS have contributed to automation and quantification of KHMC's medical environment During these five years our greatest concern is how to make our own guiding principle of diagnostic monitor QA which is adapted to international standards. In accordance with the terms of 'KHMC QA Guideline', 'AAPM TG18', 'SMPTE RP133', 'DICOM Part14', 'DIN V 6868-57', 'JESRA X-0093', 'JIS Z4752-2-5' and 'KCARE', concern about quality assurance of medical images are on the increase. With the investigation of acceptance testing and quality control of international standards for medical display devices, and data collection and analysis for recommended guideline, it is reported that acceptance testing(quality control), including geometrical distortion, display reflection, luminance response, luminance uniformity, display resolution, display noise, veiling glare and color chromaticity being adequate and effective to domestic hospital environments for medical display devices and assessment methods according to each performance. Accordingly, KHMC classified the checkpoint items by period, at the time of monitor setting, monthly, quarterly, half-yearly and annually. Periodic classification of checkpoint items for monitor QA makes a good guideline for image QA/QC and useful guideline for persistent good quality of monitor.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.1
• /
• pp.15-30
• /
• 2021

Purpose: Year of 2020, COVID-19 has been changing the people's everyday life to ways never been thought of before all over the world. The IT and electronic industry, the methods of supplying goods and services have been changed from contact to un-tact environments based on un-tact systems very rapidly. COVID-19 has been striking the tourism and the travel industry, especially the airline and hotel industry of which services are provided by human. For the passenger service of airliner, automation has been propelled and un-tact style of service has become mainstreams except cabin service since 2000's. For passenger transportation, due to traffic regulations and exclusions etc., switching to new ways is not easy. However, under the new environment made by COVID-19, kiosk check-in, web check-in and mobile check-in has become more important. In this study, the characteristics of airline customers using mobile goods are investigated to find ways to raise the rate of utilizing mobile check-in and to increase the efficiency of boarding process. Research design, data, and methodology: Considering the COVID-19 environment, survey was done by online research company. The research model is designed to integrate the user characteristics and usage/purchase motive and technology acceptance theory. Especially considering infectious diseases prevention, concern of safety is adopted as one of the usage motive variable. Results: Extraversion or conscientiousness characteristics prefers counter check-in(contact service), while openness characteristics prefers mobile check-in(un-tact service). Concern of safety for infectious disease shows strong non-preference on counter check-in. Conclusions: Regarding service type regardless of type of the industry, automation and un-tact have been mainstreams due to high costs of labor, efficiency and standardization issue, etc., and COVID-19 has given impetus to them. For airliner, un-tact service including boarding process service has been more and more important. To raise the rate of un-tact service use, the characteristics of the user should be analyzed first. The study results indicate that for extraversion or conscientiousness, some kinds of methods to induce them to use un-tact service more are needed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.88-100
• /
• 1998

In this paper, an algorithm for a real-time automatic fingerprint identification system is proposed. The fingerprint feature volume is extracted by considering distinct and local characteristics(such as intensity and image quality difference etc.) in fingerprint images, which makes the algorithm properly adaptive to various image acquisitionj methods. Also the matching technique is designed to be invariant on rotation, scaling and translation (RST) changes while being capable of real-time processing. And the classification of fingerprints is performed based on the ridge flow and the relations among singular points such as cores and deltas. The developed fingerprint identification algorithm has been applied to various sets of fingerprint images such as one from NIST(National Institute of Standards and Technology, USA), a pressed fingerprint database constructed according to Korean population distributions in sex, ages and jobs, and a set of rolled-than-scanned fingerprint images. The overall performance of the algorithm has been analyzed and evaluated to the false rejection ratio of 0.07% while holding the false acceptance ratio of 0%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.353-361
• /
• 2012

All current shipyards are using the customized CAD/CAM programs in order to improve the design quality and increase the design efficiency. Even though the data structures for ship design and construction are almost completed, the implementation related to the ship design processes are still in progress so that it has been the main causes of the bottleneck and delay during the middle of design process. In this study, we thought that the hole-plan system would be a good example which is remained to be improved. The people of outfitting division who don't have direct authority to edit the structural panels, should request the hull design division to install the holes for the outfitting equipment. For acceptance, they should calculate the hole position, determine the hole type, and find the intersected contour of panel. After consideration of the hull people, the requested holes are manually installed on the hull structure. As the above, many processes are needed such as communication and discussion between the divisions, drawings for hole-plan, and the consideration for the structural or production compatibility. However this iterative process takes a lot of working time and requires mental pressure to the related people and cross-division conflict. This paper will handle the hole-plan system in detail to automate the series of process and minimize the human efforts and time-consumption.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.23-31
• /
• 2018

This paper describes the effect of advice information for arriving aircraft landing order on the air traffic controller's work efficiency. The air traffic control simulator used in the experiment was modeled on the basis of the aircraft parameters from BADA, gamma-command model and the 4-dimensional trajectory using the Bezier curve. The simulation results show that advice information was helpful for the performance of the work for users who did not have the air traffic control training. On the other hand, in case of users who have experience in air traffic control training, the work efficiency was lowered when the advisory information that does not reflect the user's intention is provided. Therefore, it can be seen that the effect of improving the work efficiency through advice information can be limited depending on the skill level of the air traffic controllers and the complexity of the air traffic situation.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.436-445
• /
• 2011

As automation systems become intelligent and autonomous for productibility, industrial networks (fieldbuses) and network-based devices are essential components of intelligent manufacturing systems. However, there are obstacles for the wide acceptance of the network-based devices such as smart sensor and network-based actuator. First, there exist numerous fieldbus protocols that a network-based device should be able to support. Second, the whole network-based device has to be replaced when only the sensor of the module fails. In order to overcome these obstacles, a smart sensor/actuator is implemented as two units; one responsible for network communication and the other for sensor/actuator operations using IEEE 1451.0 standard. This paper presents a structure of the 1451.0-based smart sensor with multiple connectivity function designed by CANopen.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.639-643
• /
• 1997

This paper presents how nonlinear PID control algorithms can be applied on chemical processes for a more stable operation and perfect automation. A pass balance controller is designed to balance the exiting temperatures of a heater and a heat exchange network. The proposed controller has gain-varying integral action and deals with the operational constraints in an efficient manner. Also, the use of a PID gap controller is proposed to maximize energy saving and operation stability and to minimize operator intervention in operation of air fan coolers. The proposed controller adjusts the opening of a louver automatically in such a way that it keeps the air fan pitch position within the desired range. All these nonlinear PID controllers have been implemented on the distributed control system (DCS) for good reliability and operability. Operator acceptance was very high and the implemented controllers have shown good performance and high service factor still now on. The proposed methodology can be directly applied to similar processes without any modification.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.139-142
• /
• 2003

As composite materials are gaining wide acceptance in aircraft structure, repair of damaged composite is becoming an important issue. The issues in composite repair include high cost, material interchangeability, water ingression, and structural integrity. To address these problems, researchers have studied on the composite repair in various aspects. In this paper, an Internet-based advisory service (called Repair Advisory Service, RAS) for composite repair is proposed to increase efficiency for repair process. In the RAS system the web browser is used as its user interface, which provides easy access to the service. The RAS server provides web-based tools for failure prediction, Structural Repair Manual (SRM), automated prepreg cutting process, material properties, inventory and knowledge base. The computer codes implemented for repair design estimate the tensile failure and shear failure of repaired structures. The prediction of failure is based on the maximum strain criterion for tensile failure while elastic-perfect plastic shear failure model is applied for interfacial failure. The OEM's SRM is provided in the PDF format for viewing and searching by web browsers instead of looking up paper version SRM. The knowledge base in this site offers a room to share and distribute ideas, memos, publications, or suggestions from the repair engineers. The fabrication tool of RAS reads repair geometry from engineers then generates a CNC toolpath to cut prepreg patches. The RAS service is open to public and available at http://nano.gsnu.ac.kr/. Broad feedback from field technicians and engineers is welcome to improve the usefulness of RAS.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.1
• /
• pp.75-84
• /
• 2018

In this study, the researchers attempted to automate the process of painting the characters on the road surface, which is currently done by manual labor, by using the information and communication technology. Here are the descriptions of how we put in our efforts to achieve such a goal. First, we familiarized ourselves with the current regulations about painting letters or characters on the road, with reference to Road Mark Installation Management Manual of the National Police Agency. Regarding the graphemes, we adopted a new one using connection components, in Gothic print characters which was within the range of acceptance according to the aforementioned manual. We also made it possible for the automated program to recognize the graphemes by means of the feature dots of the isolated dots, end dots, 2-line gathering dots, and gathering dots of 3 lines or more. Regarding the database, we built graphemes database for plotting information, classified the characters by means of the arrangement information of the graphemes and the layers that the graphemes form within the characters, and last but not least, made the character shape information database for character plotting by using such data. We measured the layers and the arrangement information of the graphemes consisting the characters by using the information of: 1) the information of the position of the center of gravity, and 2) the information of the graphemes that was acquired through vertical exploration from the center of gravity in each grapheme. We identified and compared the group to which each character of the database belonged, and recognized the characters through the use of the information gathered using this method. We analyzed the input characters using the aforementioned analysis method and database, and then converted into plotting information. It was shown that the plotting was performed after the correction.