• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• Industrial Engineering and Management Systems
• /
• v.9 no.1
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1152-1158
• /
• 2014

In Modern society, various important systems is operated such as nuclear plant, chemistry industry, railway system and so on. But these systems can cause high risky accidents. Hence, these systems are required to ensure the individual and societal risk criteria. In this paper, we reviewed EU risk criteria which is already operated in UK and Netherlands, then we proposed acceptable risk criteria and estimated risk of oil immersed transformer for subway with FN curve.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.533-538
• /
• 2005

In this paper we identity the hazard using HAZOP study for ATSRX which is a subsystem of the ATP system, and we study a safety management method for the mitigation of the risk to the acceptable level. ATSRX is a device that make a train which has a ATP system operate in ATS line. For this ATSRX send a induction signal with ATS system to vehicle controller. Thus ATSRX can be said a safety equipment that makes a train operate safely. In order to identify the hazard for the internal faults in ATSRX system, we employ HAZOP study method which is recommended as hazard identification in IEC 62278, RAMS requirements in railway signal, and also it provide the detail activity in IEC 61882. Thus, in this paper we perform HAZOP study based on ATSRX related standards and using the assessment of the identified hazard we study a method to guarantee the system safety through the change of the design to mitigate the risk to the acceptable level.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.226-233
• /
• 2016

Cloud computing is a distributed computing model that has lot of drawbacks and faces difficulties. Many new innovative and emerging techniques take advantage of its features. In this paper, we explore the security threats to and Risk Assessments for cloud computing, attack mitigation frameworks, and the risk-based dynamic access control for cloud computing. Common security threats to cloud computing have been explored and these threats are addressed through acceptable measures via governance and effective risk management using a tailored Security Risk Approach. Most existing Threat and Risk Assessment (TRA) schemes for cloud services use a converse thinking approach to develop theoretical solutions for minimizing the risk of security breaches at a minimal cost. In our study, we propose an improved Attack-Defense Tree mechanism designated as iADTree, for solving the TRA problem in cloud computing environments.

• Radiation Oncology Journal
• /
• v.37 no.2
• /
• pp.134-142
• /
• 2019

Purpose: The aim is to study the dependence of deformable based auto-segmentation of head and neck organs-at-risks (OAR) on anatomy matching for a single atlas based system and generate an acceptable set of contours. Methods: A sample of ten patients in neutral neck position and three atlas sets consisting of ten patients each in different head and neck positions were utilized to generate three scenarios representing poor, average and perfect anatomy matching respectively and auto-segmentation was carried out for each scenario. Brainstem, larynx, mandible, cervical oesophagus, oral cavity, pharyngeal muscles, parotids, spinal cord, and trachea were the structures selected for the study. Automatic and oncologist reference contours were compared using the dice similarity index (DSI), Hausdroff distance and variation in the centre of mass (COM). Results: The mean DSI scores for brainstem was good irrespective of the anatomy matching scenarios. The scores for mandible, oral cavity, larynx, parotids, spinal cord, and trachea were unacceptable with poor matching but improved with enhanced bony matching whereas cervical oesophagus and pharyngeal muscles had less than acceptable scores for even perfect matching scenario. HD value and variation in COM decreased with better matching for all the structures. Conclusion: Improved anatomy matching resulted in better segmentation. At least a similar setup can help generate an acceptable set of automatic contours in systems employing single atlas method. Automatic contours from average matching scenario were acceptable for most structures. Importance should be given to head and neck position during atlas generation for a single atlas based system.

• Toxicological Research
• /
• v.17
• /
• pp.219-225
• /
• 2001

The basic structure for assessment of potential health risks from environmental chemicals is widely agreed upon, but many of the details of risk assessment procedures differ among practitioners. Government regulatory agencies typically have guidelines or standard procedures for their risk assessments, established to ensure consistency and comparability, to set standards for adequacy, and to embody underlying tenets. In setting and updating such guidelines, each agency takes into account not only the prevailing thinking about appropriate procedures, but also its own goals and responsibilities and the precedents it has set for itself in past analyses. This results in variations in methods, and consequently in characterization of risks, among regulatory assessments, even when they are based on the same data. As a result, adopting existing assessments from a variety of regulatory bodies needs to be done with caution. This paper examines some of the variants in risk assessment approaches among American federal regulatory agencies and relates them to the variations in regulatory responsibilities of those groups. Comparisons to international practices are also drawn. The impact on development of world-wide risk standards is discussed.

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.73-91
• /
• 2010

All activities relate to railway traffic involve risk and that these arise from a combination of the nature of operating activities. Proper management system is required to provide the organizational capability to reveal, analyse and address these weaknesses over time and in reasonably practicable ways, which will determine the rate at which risks can be further reduced. This paper presents a systematic risk analysis approach to safety planning and decision making, informed by a range of risk assessment techniques. An railway organization's safety management system is also presented that shows the approaches taken to minimize the external risks, and identify the shared risks and explain how they will be controlled through collaboration with others.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.161-166
• /
• 2000

Regulators often specify default values that are considered acceptable for use in risk analyses as input to regulatory decisions. Because both performing and validating a detailed risk analysis of a complex system are costly and time-consuming undertakings, the use of default values can greatly facilitate the process of performing a risk analysis in the first place as well as the process of reviewing and verifying the risk analysis. It may also ensure more uniform in quality of risk analyses. However, different regulatory agencies differ in their approaches to the use of default values, and the implications of these differences are not yet widely understood. Moreover, large heterogeneity among licensees makes it difficult to set suitable defaults. This paper focuses on the effect of default values on estimates of risk. Some insights on the effects of different levels of conservatism in setting defaults will be provided. The results can help decision makers evaluate the levels of safety likely to result from their regulatory policies.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.141-148
• /
• 2016

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. Especially, in case of the SIL allocation method without determining of quantitative tolerable risk, the additional review is needed to check whether it is suitable or not is required. In this study, the quantitative risk reduction model based on the safety integrity allocation results of railway platform screen door system using Risk Graph method has been examined in order to review the suitability of quantitative risk reduction according to allocated safety integrity level.