• 제목/요약/키워드: Acceptable limits

검색결과 234건 처리시간 0.036초

허용변화한계법(Limits of Acceptable Change: LAC)과 휴양기회분포(Recreation Opportunity Spectrum: ROS)를 적용한 갯벌자원 평가 (Evaluation of Wetland as Application on Limits of Acceptable Change: LAC.Recreation Opportunity Spectrum: ROS Methods)

  • 김진선
    • 한국조경학회지
    • /
    • 제31권4호
    • /
    • pp.57-66
    • /
    • 2003
  • The purpose of this study is to evaluate the resource value of existing mud flats in JANGWHARI, KANGWHADO, as strategies for ecotourism. The research methods used in this study are Limits of Acceptable Change(LAC), and Recreation Opportunity Spectrum(ROS). The LAC process draws attention to the existing area conditions that are judged to be acceptable. Managers must define desired area conditions and undertake actions to maintain or achieve these conditions. The ROS is within each of the recreation opportunity classes identified as being used at the regional level. The Results of this study are as follows: 1) The Opportunity Class of the ROS is ecological, physical, social, managerial setting as primitive, semi-primitive. non-motorized, semi-primitive$.$motorized, and roaded natural. 2) The indicator of the LAC is ecological, physical, social, and managerial setting; the indicator of ecological is wildlife populations, water quality, road paving; the indicator of physical is facilities; the indicator of social is visitor needs for knowledge, adventure, eco-experience, and environmental education programs; and, the indicator of managerial is limits of law, and degree of management. 3) Currently, the Opportunity Class of the ROS of JANGWHARI, KANGWHADO is levels II-III, and the Opportunity Class of the suggested ROS is levels I-II. 4) This paper describes strategies for mud flat area management: detection of water quality, resolving problems of equipment, supply of both environmental education programs and guide equipment.

An analysis of the potential impact of various ozone regulatory standards on mortality

  • Kim, Yong-Ku
    • Journal of the Korean Data and Information Science Society
    • /
    • 제22권1호
    • /
    • pp.125-136
    • /
    • 2011
  • Ground-level ozone, an air pollutant that is monitored by the Environmental Protection Agency (EPA), damages human health by irritating the respiratory system, reducing lung function, damaging lung cells, and aggravating asthma and other chronic conditions. In March 2008, the EPA strengthened ozone standards by lowering acceptable limits from 84 parts per billion to 75 parts per billion. Here epidemiologic data is used to study the effects of ozone regulation on human health and assessed how various regulatory standards for ozone may affect nonaccidental mortality, including respiratory-related deaths during ozone season. The assessment uses statistical methods based on hierarchical Bayesian models to predict the potential effects of the different regulatory standards. It also analyzes the variability of the results and ho they are impacted by different modeling assumptions. We focused on the technical an statistical approach to assessing relationship between new ozone regulations and mortality while other researches have detailed the relationship between ozone and human mortality. We shows a statistical correlation between ozone regulations and mortality, with lower limits of acceptable ozone linked to a decrease in deaths, and projects that mortality is expected to decrease by reducing ozone regulatory standards.

부하역률 제약조건을 고려한 최적 급전 알고리즘 (The Optimal Power Flow Algorithm Considering Load Power Factor Limits)

  • 김광욱;조종만;김진오
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제53권9호
    • /
    • pp.494-499
    • /
    • 2004
  • This paper presents to compute the power economic dispatch, an optimal power flow (OPF) computation algorithm, considering the load power factor limits constraint in developed. Efficient reactive power planning enhances economic operation as well as system security. Accordingly, an adequate level of power factor limits for the load busesshould be evaluated for economic operation. In this paper, the ranges of acceptable load power factors are portrayed as bandwidths of load power factor expressed as a function of load level. The load power factor limits are included and described into the OPF's objective function. The method Proposed is applied to IEEE 26 bus system.

Study on the performance indices of low-strength brick walls reinforced with cement mortar layer and steel-meshed cement mortar layer

  • Lele Wu;Caoming Tang;Rui Luo;Shimin Huang;Shaoge Cheng;Tao Yang
    • Earthquakes and Structures
    • /
    • 제24권6호
    • /
    • pp.439-453
    • /
    • 2023
  • Older brick masonry structures generally suffer from low strength defects. Using a cement mortar layer (CML) or steel-meshed cement mortar layer (S-CML) to reinforce existing low-strength brick masonry structures (LBMs) is still an effective means of increasing seismic performance. However, performance indices such as lateral displacement ratios and skeleton curves for LBMs reinforced with CML or S-CML need to be clarified in performance-based seismic design and evaluation. Therefore, research into the failure mechanisms and seismic performance of LBMs reinforced with CML or S-CML is imperative. In this study, thirty low-strength brick walls (LBWs) with different cross-sectional areas, bonding mortar types, vertical loads, and CML/S-CML thicknesses were constructed. The failure modes, load-carrying capacities, energy dissipation capacity and lateral drift ratio limits in different limits states were acquired via quasi-static tests. The results show that 1) the primary failure modes of UBWs and RBWs are "diagonal shear failure" and "sliding failure through joints." 2) The acceptable drift ratios of Immediate Occupancy (IO), Life Safety (LS), and Collapse Prevention (CP) for UBWs can be 0.04%, 0.08%, and 0.3%, respectively. For 20-RBWs, the acceptable drift ratios of IO, LS, and CP for 20-RBWs can be 0.037%, 0.09%, and 0.41%, respectively. Moreover, the acceptable drift ratios of IO, LS, and CP for 40-RBWs can be 0.048%, 0.09%, and 0.53%, respectively. 3) Reinforcing low-strength brick walls with CML/S-CML can improve brick walls' bearing capacity, deformation, and energy dissipation capacity. Using CML/S-CML reinforcement to improve the seismic performance of old masonry houses is a feasible and practical choice.

계량 규준형 샘플링 검사 스킴을 이용한 합격판정 관리도의 설계 및 운영 (Design and Operation of Acceptance Control Chart Using Variable Acceptance Sampling Scheme Based on Operating Characteristics(OC) Curve)

  • 최성운
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2008년도 춘계학술대회
    • /
    • pp.443-450
    • /
    • 2008
  • This paper is to present design principle and operation strategy of acceptance control chart by the use of OC-Based sampling inspection for continuous data. The unified control limits for acceptance control chart when considering both APL(Acceptable Process Level) and RPL(Rejectable Process Level) are proposed. The control limits can be also extended to the acceptance control chart with unknown process standard deviation.

  • PDF

환경소음.진동 피해 분쟁 조정을 위한 기준설정에 관한 소고 (A brief review on the standards of regulations and compensation in the environmental noise and vibration disputes resolution)

  • 이수갑;김재환;김규태;홍지영;은희준
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.876-878
    • /
    • 2008
  • The standards of acceptable limit and compensation is one of the most important things in environmental noise and vibration disputes resolution. In this paper, review on the present acceptable limit level and compensation standard in National Environmental Dispute Resolution Commission is introduced. Discordance of standards between in the regulation law and in the dispute resolution commission and it's improvement are discussed. Abnormal reasoning for compensation standards is pointed out from a author's private view.

  • PDF

마른멸치 작업장의 식품안전관리인증기준(HACCP)모델 개발 (Development of an Hazard Analysis Critical Control Point (HACCP) Application Model for Dried Anchovy Workplace)

  • 윤현진;함인태;김상현;최종덕
    • 수산해양교육연구
    • /
    • 제28권3호
    • /
    • pp.713-726
    • /
    • 2016
  • This study were attempted to apply the HACCP system adopted in the dried anchovy workplace to ensure the hygiene safety of dried anchovy workplace. In this study, HACCP system procedures, including HACCP team organization, determination of critical control point(CCP), establishment of critical limits, mornitering and verification etc., were established using KFDA 12 procedures. To determine whether hazards were critical elements, we evaluated the likelihood and seriousness of each hazard element. The likelihood of residual microorganism and metal piece exceeding the acceptable limit in dried anchovy products were demonstrated to be a critical hazard element. Management of the boiling(CCP-1B) and metal detection(CCP-2P) were determined to be a critical control point. The standards for acceptable residual microorganism and metal piece were set based on relevant laws and regulations, and then the limits were adapted and established for the CCP. An HACCP plan applicable to dried anchovy workplace was established.

Market-Based Transmission Expansion Planning Under Uncertainty in Bids by Fuzzy Assessment

  • Kamyab, Gholam-Reza;Fotuhi-Firuzabad, Mahmood;Rashidinejad, Masoud
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권4호
    • /
    • pp.468-479
    • /
    • 2012
  • In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view. However criteria congestion cost (CC) and social welfare (SW) together are able to correctly evaluate transmission network from market view and so they are adopted for the market-based transmission expansion planning. To simply indicate the limits of CC and SW social welfare percentage (SWP) and congestion cost percentage (CCP) are defined. To consider uncertainty in bids of market producers and consumers, and also indeterminacy in the acceptable boundaries of the SWP and CCP and their priorities, fuzzy assessment approach is used. In this approach, appropriate fuzzy sets and a fuzzy rule base are provided to evaluate the acceptability of an expansion plan. Then, the least-investment cost plan, which is acceptable in all probable scenarios, is searched. The proposed method is applied to an 8-bus system.

누적외상병 예방을 위한 심생리학적 접근법을 이용한 상체작업의 안전한 작업기준의 설정에 관한 연구 (Acceptable work limits for the upper extremities with the psychophysical approach)

  • Kim, Chol-Hong;Marley, Robert J.;Fernandez, Jeffrey E.;Klein, Mary G.
    • 대한인간공학회지
    • /
    • 제13권2호
    • /
    • pp.57-63
    • /
    • 1994
  • This paper summarizes recent research in the use of the psychophysical method of adjustment to establish acceptable parameters for upper extremity work activities. Results from these studies show that this psychophysical approach can provide reliable guidelines based upon realistic job conditions which involve one or more risk factors for cumulative trauma. It is also shown that this method provides advantages over other psychophysical methods as well as current biomechanical and physioligical criteria.

  • PDF

환경방사능 측정에서의 검출한계치의 정량적 고찰 및 최소검출방사능 농도 계산 (Determination of Minimum Detectable Activity in Environmental Samples)

  • 이명호;신현상;홍광희;조영현;이창우
    • Journal of Radiation Protection and Research
    • /
    • 제24권3호
    • /
    • pp.171-184
    • /
    • 1999
  • 본 논문에서는 저준위 환경방사능 측정시 이용되는 검출한계에 대한 기본개념 및 수식을 통계학적 이론을 기초로 서술하였다. 방사능을 정확하게 검출할 신뢰도를 95%로 설정하여 알파 베타 및 감마선 측정기에 대한 검출한계치값을 계산하였다. 또한 환경 방사능 계측에 많이 사용되는 방사능 핵종에 대해 최소 검출 방사능 농도값을 검출한계치 개념을 근거로 계산하여 저준위 환경 방사능 분석시 환경방사능 측정결과에 대한 신뢰도 평가에 활용 가능 하도록 하였다.

  • PDF