• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.4 no.1
• /
• pp.11-19
• /
• 2008

Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.142-146
• /
• 2002

In order to develop a new traditional liquor by using Paecilomyces japonica, alcohol fermentation condition was investigated. Ethanol was produced maximally when 1% P. japoniea and 10% koji were added into mash and fermented by Saccharomyces cerevisiae at $25^{\circ}C$ for 15 days. Sensory evaluation and physiological functionalities of P. japonica traditional liquors made by different addition ($0.1{\sim}2.0%$) of the fungus were also determined and compared. As 0.1% P. japonica was added to mash, the liquor was best acceptable, and its fibrinolytic activity and nitrite scavenging activity were 11.2U and 19.8%, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.58-64
• /
• 2008

In this paper, we proposed the methodology of interference analysis based on monte-carlo method for effective use of Industrial, Scientific, Medical (ISM) band. The interference scenario is divided according to the distance and density. The simulation of interference analysis evaluates the interference probability according to distribution density of Interfering Transmitters (It) in the Secure Interference Area (SIA). The SIA is gained from the Interference Efficiency Range that satisfied to Interference Permissible Range of Victim Receiver (Vr). Simulation result that apply the proposed interference scenario to the WLAN and bluetooth, Interference Permissible Range was 60~400m. And the WLAN was acceptable within interference permissible range to six bluetooth that exist in the SIA. In the same condition, when applied Listen Before Talk (LBT) based on Cognitive Radio (CR) to the bluetooth using Frequency Hopping (FH), interference probability was decreased sharply. The Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) that has been developed based on the monte-carlo method by European Radio-communications Office (ERO) were used to the interference simulation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.371-374
• /
• 2004

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Preventive maintenance of induction motors has been a topic great interest to industry because of their wide range application of industry. Since the use of mechanical sensors, such as vibration probes, strain gauges, and accelerometers is often impractical, the motor current signature analysis (MACA) techniques have gained murk popularity as diagnostic tool. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is independent of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current, voltage, temperatures, vibration and speed of the motor. The DSPs share information from each sensor or DSP through DPRAM with hardware implemented semaphore. And it communicates the motor status through field bus (CAN, RS485). From the designed system, we get primitive sensors data for the case of normal condition and two abnormal conditions of 3 phase induction motor control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using CAN protocol.

• Atmosphere
• /
• v.26 no.4
• /
• pp.541-551
• /
• 2016

A real-time quality control algorithm for $PM_{10}$ concentration measured by Continuous Ambient Particulate Monitor (FH62C14, Thermo Fisher Scientific Inc.) has been developed. The quality control algorithm for $PM_{10}$ data consists of five main procedures. The first step is valid value check. The values should be within the acceptable range limit. Upper ($5,000{\mu}g\;m^{-3}$) and lower ($0{\mu}g\;m^{-3}$) values of instrument detectable limit have to be eliminated as being unrealistic. The second step is valid error check. Whenever unusual condition occurs, the instrument will save error code. Value having an error code is eliminated. The third step is persistence check. This step checks on a minimum required variability of data during a certain period. If the $PM_{10}$ data do not vary over the past 60 minutes by more than the specific limit ($0{\mu}g\;m^{-3}$) then the current 5-minute value fails the check. The fourth step is time continuity check, which is checked to eliminate gross outlier. The last step is spike check. The spikes in the time series are checked. The outlier detection is based on the double-difference time series, using the median. Flags indicating normal and abnormal are added to the raw data after quality control procedure. The quality control algorithm is applied to $PM_{10}$ data for Asian dust and non-Asian dust case at Seoul site and dataset for the period 2013~2014 at 26 sites in Korea.

• Archives of Plastic Surgery
• /
• v.45 no.6
• /
• pp.525-533
• /
• 2018

Background Patients with ectropion experience devastating symptoms. Therefore, the prevention and management of this condition are of utmost importance. To treat ectropion, it is important to perform medial and lateral canthopexy in an effective way. In this study, we propose a comprehensive algorithm for the prevention and management of ectropion based on a new classification of ectropion according to its signs and causes. Methods Canthopexy was performed in 68 cases according to the proposed algorithm, which starts with a categorization of the types of ectropion and ends with the recommended operative technique. To assess the results, we reviewed clinical preoperative and postoperative photographs. To evaluate improvements in patients' symptoms, we conducted a survey with responses scored on a Likert scale. Results None of the patients had scleral show postoperatively. The average patient satisfaction score was satisfied or higher for all symptoms, and the most improved symptom was aesthetic appearance. No major complications were reported. Conclusions For the comprehensive management of ectropion, it is crucial to consider both treatment and prevention. Through the simple surgical algorithm proposed in this study, both medically acceptable results and high levels of patient satisfaction were achieved without significant postoperative complications. We recommend using this algorithm for the comprehensive management of ectropion.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.140-149
• /
• 2016

All pesticides must be assessed strictly whether safe or not when agricultural operators are exposed to the pesticides in farmland. A pesticide is commonly regarded as safe when estimated dermal absorption amount is lower than the acceptable operator's exposure level (AOEL). In this study, dermal absorption rate of chlorpyrifos, a widely used organophosphate insecticide, was investigated using rat dermal tissue model. Chlorpyrifos wettable powder solved in water (250, 500 and 2,500 ppm) was applied to freshly excised rat dermal slices ($341{\sim}413{\mu}m$ thickness) on static Franz diffusion cells at $32^{\circ}C$ for 6 hours. After exposure period of 6 hours, and then washing-at residual amount of chlorpyrifos was analyzed in dermal tissues, tape strips, washing solution, washing swabs of receptor bottles and receptor fluids at 1, 2, 4, 8 and 24 hours. Chlorpyrifos was only detected in dermal tissue but not found in receptor fluid at each concentration and time point, and the absorption rate of 250, 500 and 2,500 ppm was 2.36%, 1.96% and 1.69%, respectively. The estimated exposure level of chlorpyrifos was calculated as 0.012 mg/kg bw/day. The health risk for farmers in this condition is a level of concern because the estimated exposure level is 12 times higher than AOEL 0.001 mg/kg bw/day. However, actual health risk will be alleviated than estimated because absorbed chlorpyrifos is not permeated into internal body system and only retained in skin layer.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.650-655
• /
• 1998

The chromosomal DNA fragment from Phaffia rhodozyma CBS 6938 which is able to autonomously replicate in the yeast Saccharomyces cerevisiae was cloned on an integrative URA3 plasmid. Its minimal fragment exhibiting autonomously replicating activiy in the S. cerevisiae gave a higher frequency transformation efficiency than that found for centromere-based plasmid, and enabled extrachromosoma1ly stable transmission of the plasmids in one copy per yeast cell under non-selective culture condition. The 836-bp DNA element lacked an ORF and did not contain any acceptable match to an ARS core consensus. Sequence analysis, however, displayed a cluster of three hairpin-Ioop-sequences with individual $\triangle {G_{25}}^{\circ}C$ free energy value of -10.0, -17.5, and -17.0 kcal. $mor^{-l}$as well as a 9-bp sequence with two base pair mismatches to the S. cerevisiae/E. coli gyrase-binding site. This 836-bp sequence also included one 7-bp sequence analogous to the core consensus of centromeric DNA element III (CDEIII) of S. cerevisiae, but CDEIII-like 7 bp sequence alone did not give a replicative function in this yeast.

• The Korean Journal of Pain
• /
• v.14 no.1
• /
• pp.98-103
• /
• 2001

Neuropathic pain originating from multiple condition of nerve cell injury is common, but is difficult to treat. Even though many drugs such as anti-convulsants, anti-depressants, NSAIDs, opioids have been used, their clinical analgesic action were not satisfactory due to occur severe side effects. Gabapentin was introduced in 1994 as a novel antiepileptic drug and has been used to treat partial seizure. After 1995 gabapentin treatment for reflex sympathetic dystrophy (RSD) started, 45% of the reports about the analgesic efficacy of gabapentin were restricted to the treatments of non-epileptic pain syndrome. This drug is preferred to treat neuropathic pain because of a lower incidence of its side effects than those of other anti-convulsants and anti-depressants. For evaluating it's analgesic efficacy, the changes in the patients' subjective pain intensity was measured by the score on the visual analogue scale (VAS) and patient's objective pain intensity by measuring the skin temperature via infrared thermography were investigated respectively. Side effects of gabapentin were look into. We observed successful relief of neuropathic pain in the three patients which included post-herpetic neuraligia, complex regional pain syndrome (CRPS) and diabetic neuropathic pain, and the side effects of gabapentin were at acceptable levels.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.2
• /
• pp.118-125
• /
• 1985

To establish an evaluation system of aquatic toxicity of chemicals at no-effect level, flow through and early life stage toxicity test were performed on a freshwater fish, the medaka (Oryzias latipes). The characteristics of medaka as a bioassay organism for the chronic toxicity test were discussed. Maximum acceptable toxicant concentration(MATC) of butachlor for the madaka in soft water was estimated using survival, growth, and reproduction as indicators of toxic effects. During a 3-month period, the fry of medaka were exposed to butachor concentrations ranging from 0.16 to 0.0l mg/liter and the DO concentration, temperature, and pH in the exposure chamber were measured to check the test condition. The highest concentration showed slight decrease of growth rate in medaka and reduced hatchability of spawning egg. Survival, growth, and reproductive success of adults in butachlor concentration of 0.04 and 0.01 mg/liter were not different from those of the control. The MATC was estimated to be between 0.04 and 0.16 mg/liter for medaka.