• Journal of computational fluids engineering
• /
• v.13 no.3
• /
• pp.44-50
• /
• 2008

The present study is carried out in order to investigate the effect of the periodic acceleration in the stenosed and bifurcated blood vessels. The blood flow and wall shear stress are changed under body movement or acceleration variation. Numerical studies are performed for various periodic acceleration phase angles, bifurcation angles and section area ratios of inlet and outlet. It is found that blood flow and wall shear stress are changed about ${\pm}20%$ and ${\pm}24%$ as acceleration phase angle variation with the same periodic frequency. also wall shear stress and blood flow rate are decreased as bifurcation angle increased.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.115-122
• /
• 2015

PURPOSES: Recently, many local governments have applied chicanes for traffic calming to ensure environment-friendly comfortable and safe roads. However, the geometry of a chicane is designed for speed reduction using a curved portion. This study aims to improve the road geometry conditions of chicanes for reducing carbon emissions and maintaining appropriate driving speeds by considering the relationship between road geometry and carbon emissions. METHODS: This study was conducted as follows. First, carbon emissions corresponding to changing acceleration of vehicles were studied. Second, vehicle acceleration caused by the relationship between the curve radius and the straight length was studied. Accordingly, desirable conditions of curve radius and length of the straight section for reducing carbon emissions were proposed. RESULTS: The existing literature on chicanes present the minimum value of stagger length and path angle in the primary variable condition. This study suggests the maximum values of the curve radius and length of straight section in the primary variable condition. Therefore, if a vehicle's speed at a chicane is 30 km/h, this study suggests a curve radius of up to 24 m. In addition, if the vehicle's speed is 24 km/h, this study suggests a length of straight section of up to 6.6 m. These are the geometric conditions for considering the control of acceleration to the vehicle's maximum speed. CONCLUSIONS: This paper proposes an application of geometric conditions to reduce carbon emissions and maintain appropriate speeds of vehicles through a combination of curve radius and length of straight section.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.136-140
• /
• 2011

In this study, to investigate the dangerous driving on the curves, a driving test was performed in 10 km from Jinan and to Jeonju(Bugui Gas Station~Whasim Intersection), on the national highway No. 26. For the dangerous driving felt by the driver when a driver is driving on the curves, lateral acceleration and yaw rate were analyzed. And then, the reference value of lateral acceleration and yaw rate was computed. Through observing the driving speed and the characteristics of ordinary drivers using the applicable roads or following them as they drive, the driving test was performed again and the section exceeding the reference value set as above was computed. On the dangerous driving area, exceeding the reference value, total 10 accidents took place from 2006 till 2010, and slipping caused by speeding accounted for more than 70% of the accidents. It was concluded that the result of an analysis through recording drivers' driving characteristics, was reliable.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.67-79
• /
• 2021

The influence of ground motions on the seismic response of utility tunnels was investigated. A series of small-scale shaking table model tests were carried out under uniform excitation in the transverse direction. Different peak accelerations of EL-Centro and Taft earthquake waves were applied. The acceleration responses, earth pressure, seismic strain, bending moment and structure deformations were measured and discussed. The results showed that the types of earthquake waves had significant influences on the soil-structure acceleration responses. However, the amplitude of the soil acceleration along the depth showed consistent variation regardless of the types of earthquake waves and tunnels. The horizontal soil pressure near the top and bottom slabs showed obviously larger values than those at other depths. In general, the strain response in the outer surface was more significant than that on the inner surface, and the peak strain in the end section of the model was larger than that in the middle section. Moreover, the bending moment at the corner points was much larger than that at middle point, and the bending moment was greatly affected by both input accelerations and seismic wave types. The opposite direction of shear deformation on the top and bottom slabs presented a rotation trend of the model structure.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.155-172
• /
• 1996

This study is to analyze speed variation at merging section of successive entrance ramp and to suggest design criterion of ramp spacing at successive entrance ramp in urban area. The major findings are as follows ; (1) The relationship between the speed at merging section of successive entrance ramp and the distance from the merging point represents concave curve. (2) The 85 percentile speed(S) at outside lane (lane 1) is modeled S = 49.5 + 355.7(D/Q) - 0.94(D2/Q) + 6.78(D/AL2) where, D = Distance from merging point(m), Q = Lane 1 volume(vph) AL2 = Acceleration length at second entrance ramp(m) (3) The more traffic volume and the shorter acceleration length of the second entrance ramp, longer ramp terminal spacing is needed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1111-1129
• /
• 2014

A 9300 TEU container carrier was equipped in 2006 with instrumentation aimed at wave induced accelerations, and motions. In 2010 the system was extended with strain sensors to include structural loads. Section loads for vertical bending could be readily obtained but the originally intended derivation of horizontal bending and torsion from the measured strains was found to be unreliable. This paper addresses an alternative approach that was adopted in the post processing of results. In particular the concept to use acceleration sensors to capture global hull deformations along the length of the hull, and the use of a data fusion procedure to obtain section loads from combined sensor data and finite element calculations. The approach is illustrated by comparison of actually measured accelerations and local strains with values obtained from the data fusion model. It is concluded that the approach is promising but in need of further validation and development. In particular the number and shapes of the modes used may not have been sufficient to represent the true deflection and thus strain distributions along the high loaded areas.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.607-612
• /
• 2007

In this paper, operation mode of train was divided into powering, coasting, and braking and rail wear phenomenon has been done comparative analysis by each section. Data of train velocity is transferred to acceleration and deceleration from ATO Logging data. Amount of rail wear has been done comparative analysis by traction force of acceleration and braking force of deceleration and a plan for management of track irregularity is come up with by the result of the analysis.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.45-49
• /
• 2021

In this study, during the injection molding process, a device was manufactured and evaluated that calculates a cooling time by measuring a vibration signal generated from a mold using an acceleration. The last two parts, one of which has a large magnitude change in the measured vibration signal of a mold, were divided into a cooling start section (paking end section) and a mold opening section, and the time difference at the relevant points was calculated as the cooling time. The cooling time was monitored on a 5-inch light guide plate mold by applying the method. The manufactured device was attached to a fixed base of mold to measure the cooling time, and data was obtained remotely using Bluetooth technology. Then, the measured cooling time was compared with the cooling time set in the injection molding machine to evaluate the accuracy. As a result of the experiment, the cooling times measured by the devices were 15.675±0.024 sec, 20.637±0.014 sec and 25.623±0.079 sec of each conditions. Also, the measurement results were shown with errors of 0.655±0.044 sec, 0.637±0.014 sec, and 0.662±0.013 sec, respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.845-849
• /
• 2024

Currently, rail surface defects are increasing due to the aging of urban railway rails, but in the detailed guidelines for track performance evaluation established by the country, rail surface damage is inspected with the naked eye of an engineer and with simple measuring tools. It is very important to discover defects in the rail surface through periodic track tours and visual inspection. However, evaluating the severity of defects on the rail surface based on the subjective judgment of the inspector has significant limitations in predicting damage inside the rail. In this study, the characteristics of cracks inside the rail due to rail surface damage were studied. In field measurements, rail surface damage was selected, old rail samples were collected in the acceleration and braking sections, and a scanning electron microscope (SEM) was used to evaluate the rail surface damage was used to analyze the crack characteristics. As a result of the analysis, the crack mechanism caused by the running train and the crack characteristics of the acceleration section where cracks occur at an angle rising toward the rail surface were experimentally proven.