• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.418-423
• /
• 1992

In this paper, a model reference adaptive control algorithm is applied to the design of the normal acceleration controller for missiles with nonminimum-phase characteristics. The method used in this paper is due to Ohkubo. In this scheme, a feedforward compensator is designed first so that the extended system becomes minimum-phase and after that an adaptive control algorithms is designed for the extended system. The feedforwrd compensator is obtained by solving the robust stabilization problem. It is shown that the performance of the designed controller is satisfied via computer simulation.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• 대한전기학회논문지
• /
• 제39권12호
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.68-75
• /
• 2003

This paper presents an effective trajectory planning algorithm for industrial robot manipulators. Given the end-effector trajectory in Cartesian space, together with the relevant constraints and task specifications, the proposed method is capable of planning the optimum end-effector trajectory. The proposed trajectory planning algorithm considers the joint acceleration limit, end-effector velocity limits, and trajectory allowance. A feedforward compensator is also incorporated in the proposed algorithm to counteract the delay in joint dynamics. The algorithm is carefully designed so that it can be directly adopted with the existing industrial manipulators. The proposed algorithm can be easily programmed for various tasks given the specifications and constraints. A three-dimensional test trajectory was planned with the proposed algorithm and tested with the Performer MK3s industrial manipulator. The results verified effective manipulator performance within the constraints.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.552-555
• /
• 1997

Recently, increasing attention has been paid to the application of learning control method to robot manipulator control. Because the learning control method does not require an exact dynamic model, it is flexible and easy to implement. In this paper, we implement a learning control scheme which consists of a unique feedforward learning controller and a linear feedback controller. The learning control method does not require acceleration terms that are sensitive to noise and has the capability of rejecting unknown disturbances and adapting itself to time-varying system parameters. The feasibility of the learning control scheme is soon by implementing the control scheme to a commercial robot manipulator and the performance of which is also compared with the conventional linear PID control method.

• 제어로봇시스템학회논문지
• /
• 제10권9호
• /
• pp.840-846
• /
• 2004

In this study, the performance of a heavy load pointing system has been investigated. The PI controller are being widely used in industrial application because of simple, cheap, and excellent performance. However, the requirement for control precision becomes higher and higher, as well as the plants becomes more and more complex. In order to achieve the satisfied control performance, we have to consider the affection of nonlinear factor contained in plant. In this paper, the neural-PI control law have been evaluated. The proposed controller is compared with the existing controllers through simulations, and the results show that the pointing accuracy of the proposed control system is improved against the disturbance induced by vehicle running on the bump course.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.504-509
• /
• 1990

This paper presents a decentralized adaptive control scheme for multi-Joint robot manipulators based on the independent joint control scheme. The control object is to achieve accurate tracking of desired Joint trajectories. The proposed control scheme does not use the complex manipulator dynamic model, and each joint is controlled simple by a feedback controller which ensure stable and also a position-velocity-acceleration feedforward controller and also auxiliary signal, with adjustable gains. Simulation results are given for a two-link manipulator under independent control, proposed decentralized adaptive control of manipulator is feasible. In spite of a pay load variation and strong static and dynamic couplings that exist between the joints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.421-424
• /
• 1990

An iterative learning control scheme for exact-tracking control and parameter estimation of uncertain robotic systems is presented. In the learning control structure, tracking and feedforward input converge globally and asymptotically as iteration increases. Since convergence of parameter errors depends only on the persistent exciting condition of system trajectories along the iteration independently of length of trajectories, it may be achieved with only system trajectories of small duration. In addition, these learning control schemes are expected to be effectively applicable to time-varying parametric systems as well as time-invariant systems, for the parameter estimation is performed at each fixed time along the iteration. Finally, no usage of acceleration signal and no in version of estimated inertia matrix in the parameter estimator makes these learning control schemes more feasible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.900-901
• /
• 2007

In this paper, an approach to designing controllers for dynamic hybrid Tension/Mobile control of a installed robot for a troy wire cable is presented. Mobile control system of robot is designed based on equation of dc motor and tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a wire cable. Dynamic hybrid control system is proposed by feedforward controller with acceleration and tension at start of robot to the case where the tow task of robot dynamics is suppressed a mutual interference. The proposed system is simulated and experimented, results is verified the utilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1355-1360
• /
• 1990

This paper describes the application of the recently developed feedback linearization technique to the design of a new command to line-of-sight (CLOS) guidance law for skid-to-turn (STT) missiles. The key idea lies in converting the three dimensional CLOS guidance problem to the tracking problem of a time-varying nonlinear system. Then, using a feeedback linearizing approach to tracking in nonlinear systems, we design a three dimensional CLOS guidance law that can ensure zero miss distance for a randomly maneuvering target. Our result may shed new light on the role of the feedforward acceleration terms used in the earlier CLOS guidance laws. Furthermore, we show that the new CLOS guidance law can be computationally simplified without performance degradation. This is made possible by dropping out the terms in the new CLOS guidance law, which obey the well-known matching condition.