• Journal of Ginseng Research
• /
• 제9권1호
• /
• pp.86-94
• /
• 1985

Attempts were made if diol and triol fractions of ginseng saponin affect on glutamine transport into rat renal cortical mitochondria, swelling, phosphate dependent glutaminase activity, and consumption of oxygen. The following results were obtained. When mitochondrial preparation from rat renal cortex was incubated in medium containing 14C-glutamine and either triol or diol fractions, radioactivity was shown to increase at both 10-6% and 10-5% triol fractions of ginseng saponin, but reduce in case of diol fraction. The remarkable acceleration of the rate of swelling of renal cortical mitochondria was observed in the presence of 10-1% trios and diol fractions but no accerelation at lower concentrations. The activity of phosphate dependent glutaminase from renal cortical mitochondria was slightly activated at 10-2% of triol fraction. However, there was no effect in case of diol fraction. Oxygen consumption by mitochondria from renal cortex was remarkably increased at concentrations of 10-5% and 10-6% triol fractions, but reduced in the case of diol fractions. On the basis of these observations it was concluded that triol fraction of ginseng saponin might increase the transport of glutamine into mitochondria by accelerating the respiratory chain and supplying additional energy to mitochondria, and physiological role of triol fraction was entirely different from that of diol fraction of ginseng saponin.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.2977-2997
• /
• 2018

In big data era, fresh data grows rapidly every day. More than 30,000 gigabytes of data are created every second and the rate is accelerating. Many organizations rely heavily on real time streaming, while big data stream computing helps them spot opportunities and risks from real time big data. Storm, one of the most common online stream computing platforms, has been used for big data stream computing, with response time ranging from milliseconds to sub-seconds. The performance of Storm plays a crucial role in different application scenarios, however, few studies were conducted to evaluate the performance of Storm. In this paper, we investigate the performance of Storm under different application scenarios. Our experimental results show that throughput and latency of Storm are greatly affected by the number of instances of each vertex in task topology, and the number of available resources in data center. The fault-tolerant mechanism of Storm works well in most big data stream computing environments. As a result, it is suggested that a dynamic topology, an elastic scheduling framework, and a memory based fault-tolerant mechanism are necessary for providing high throughput and low latency services on Storm platform.

• 한국경영과학회지
• /
• 제22권1호
• /
• pp.101-121
• /
• 1997

Consider a Jackson type closed queueing network in which each queue has a single exponential server. Assume that N customers are moving among .kappa. queues. We propose a candidata procedure which yields a lower bound of the network throughput which is sharper than those which are currently available : Let (.rho.$_{1}$, ... .rho.$_{\kappa}$) be the loading vector, let x be a real number with 0 .leq. x .leq. N, and let y(x) denote that y is a function of x and be the unique positive solution of the equation. .sum.$_{i = 1}$$^{\kappa}$y(x) .rho.$_{i}$ (N - y(x) x $p_{i}$ ) = 1 Whitt [17] has shown that y(N) is a lower bound for the throughput. In this paper, we present evidence that y(N -1) is also a lower bound. In dosing so, we are led to formulate a rather general conjecture on 'quot;Migrating Critical Points'quot; (MCP). The .MCP. conjecture asserts that zeros of successive derivatives of certain rational functions migrate at an accelerating rate. We provide a proof of MCP in the polynomial case and some other special cases, including that in which the rational function has exactly two real poles and fewer than three real zeros.tion has exactly two real poles and fewer than three real zeros.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.49-57
• /
• 2007

This paper proposes a traction control system (TCS) that uses a sliding mode wheel slip controller and a PID throttle valve controller. In addition, a yaw motion controller (YMC) is also developed to improve lateral stability using a PID rear wheel steering angle controller. The dynamics of a vehicle and characteristics of the controllers are validated using a proposed full-car model. A driver model is also designed to steer the vehicle during maneuvers on a split ${\mu}$ road and double lane change maneuver. The simulation results show that the proposed full-car model is sufficient to predict vehicle responses accurately. The developed TCS provides improved acceleration performances on uniform slippery roads and split ${\mu}$ roads. When the vehicle is cornering and accelerating with the brake or engine TCS, understeer occurs. An integrated TCS eliminates these problems. The YMC with the integrated TCS improved the lateral stability and controllability of the vehicle.

• 에너지공학
• /
• 제20권4호
• /
• pp.286-291
• /
• 2011

하이브리드 자동차는 전기방식 회생제동을 이용하여 연비가 우수하다. 본 논문에서는 새로운 공압식 회생제동 장치를 소개하였다. 공압식 회생제동장치는 압축과 팽창기능을 동시에 가지는 스크롤 기구를 이용한다. 차량 감속시에는 스크롤 기기는 압축기로 작동되면서 대기중의 공기를 압축하여 압축탱크에 저장한 후 차량 가속시에는 스크롤기구가 팽창기로 작동되면서 탱크에 저장된 압축공기가 차량 운동에너지로 활용된다. 회생제동장치를 사용함으로써 개선되는 연비를 분석하기 위해, CVS-75 모드 주행조건에서 시뮬레이션을 수행하였다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.303-311
• /
• 2004

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, B$_{10}$ life and its lower bound with 90% confidence at worst case use condition are estimated by analyzing the accelerated life test data.a.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1379-1382
• /
• 1997

Diamond-like carbon(DLC) thin films are produced by using a filtered cathodic vacuum arc(FCVA) deposition system. Different magnetic components, namely steering, focusing, and filtering plasma-optic systems, are used to achieve a stable arc plasma and to prevent the macroparticles from incorporating into the deposited films. Effects of magnetic fields on plasma behavior and film deposition are examined. The carbon ion energy is found to be varied by applying a negative (accelerating) substrate bias voltage. The deposition rate of DLC films is dependent upon magnetic field as well as substrate bias voltage and at a nominal deposition condition is about $2{\AA}/s$. The structural properties of DLC films, such as internal stress, relative fraction of tetrahedral($sp^3$) bonds, and surface roughness have also been characterized as a function of substrate bias voltages and partial gas($N_2$) pressures.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.353-357
• /
• 2007

본 연구의 목표는 고 에너지원이 고 출력 펄스 레이저를 이용하여 금속 표면에서 발생하는 충격파를 분석하고 이를 다른 분야에 적용하는 것이다. 금속 표면 일정 단면에 펄스 레이저를 조사시키면 충격파가 발생하며 이 충격파는 음향 임피던스에 의해 레이저가 조사된 반대 방향으로 극 초음속(4000m/s 이상)으로 매우 짧은 시간동안 진행하며 다른 표면에서도 고 에너지에 의해 충격파가 발생한다. 이와 함께 얇은 금속은 순간 탄성변형을 일으킨다. 짧은 시간에 발생하는 모든 현상은 ICCD카메라를 통해 확인 할 수 있다. 이 실험의 목적은 고 에너지에 의해 발생한 충격파를 이용하여 미립자를 매우 빠른 속도로 가속하는데 있다.

• 한국농림기상학회지
• /
• 제3권1호
• /
• pp.55-70
• /
• 2001

It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21~23$^{\circ}C$ for 40 days after flowering, increased with long anomalies in 1998~99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than norm in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Togil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than japonica rices, photoperiod-sensitive and thermo-sensitive ecotypes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권4호
• /
• pp.1095-1109
• /
• 2022

Along with the popularity of GPS system and smart cell phone, trajectories of pedestrians or vehicles are recorded at any time. The great amount of works had been carried out in order to discover traffic paradigms or other regular patterns buried in the huge trajectory dataset. The core of the mining algorithm is how to evaluate the similarity, that is, the "distance", between trajectories appropriately, then the mining results will be accordance to the reality. Euclidean distance is commonly used in the lots of existed algorithms to measure the similarity, however, the trend of trajectories is usually ignored during the measurement. In this paper, a novel segment transform distance (STD) algorithm is proposed, in which a rule system of line segment transformation is established. The similarity of two-line segments is quantified by the cost of line segment transformation. Further, an improvement of STD, named ST-DTW, is advanced with the use of the traditional method dynamic time warping algorithm (DTW), accelerating the speed of calculating STD. The experimental results show that the error rate of ST-DTW algorithm is 53.97%, which is lower than that of the LCSS algorithm. Besides, all the weights of factors could be adjusted dynamically, making the algorithm suitable for various kinds of applications.