• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.251-252
• /
• 2012

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low Water Vapor Transition Rate (WVTR) of $1{\times}10^{-6}g/m^2$/day. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2$/day) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study, we developed an $Al_2O_3$ nano-crystal structure single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS system is based on the conventional RF magnetron sputtering and neutral beam source. The neutral beam source consists of an electron cyclotron Resonance (ECR) plasma source and metal reflector. The Ar+ ions in the ECR plasma are accelerated in the plasma sheath between the plasma and reflector, which are then neutralized by Auger neutralization. The neutral beam energies were possible to estimate indirectly through previous experiments and binary collision model. The accelerating potential is the sum of the plasma potential and reflector bias. In previous experiments, while adjusting the reflector bias, changes in the plasma density and the plasma potential were not observed. The neutral beam energy is controlled by the metal reflector bias. The NBAS process can continuously change crystalline structures from an amorphous phase to nano-crystal phase of various grain sizes within a single inorganic thin film. These NBAS process effects can lead to the formation of a nano-crystal structure barrier layer which effectively limits gas diffusion through the pathways between grain boundaries. Our results verify the nano-crystal structure of the NBAS processed $Al_2O_3$ single gas barrier layer through dielectric constant measurement, break down field measurement, and TEM analysis. Finally, the WVTR of $Al_2O_3$ nano-crystal structure single gas barrier layer was measured to be under $5{\times}10^{-6}g/m^2$/day therefore we can confirm that NBAS processed $Al_2O_3$ nano-crystal structure single gas barrier layer is suitable for OLED application.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.949-956
• /
• 2016

There are a number of effects by solar radiation in many aerospace industrial fields, such as degradation of mechanical properties, sealing effect of sealants or decolorization. Because it takes long time to investigate these effects by using the light of natural state, new methods are developed for accelerating this phenomenon. In this paper, we developed an apparatus to simulate accelerated solar radiation phenomenon selecting irradiation intensity $1,120W/m^2$ as the designed environment. Epoxy polymer as the composite material was chosen and processed by ASTM-D638, a reference for tensile test of polymer and plastic. Total color shift was selected as the test category to evaluate acceleration of the test. We obtained acceleration factors and numerical model from test data and concluded it can shorten test periods by accelerated irradiation intensity of $1,120W/m^2$.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.81-93
• /
• 2014

Purpose - Recent rapid environmental changes in the hospital industry are accelerating the spread of customer satisfaction management. Customers' desires have become diversified and advanced; in the past, customers tended to preferred popularized and standardized care, whereas they now prefer individualized and differentiated care, based on an increase in income. Specifically, this study tries to analyze the mediating effects of factors that affect the configuration portion of customer value and relationship quality (customer trust and relationship commitment) by investigating the impacts and configuration factor of customer value on relationship quality and determining how these factors impact customer loyalty directly or indirectly. Research design, data, and methodology - This study aims to determine the customer value factors that impact the perceptions of dental hospital customers, how these factors impact relationship quality and customer loyalty, and the causal relationship of these factors, and to verify the research model based on previous research. To increase the validity and reliability of the questionnaire, the authors of this study constructed basic questions using measurement tools already verified for reliability and validity in existing studies. In this study, customer value is defined as customers' recognizing value by exchanging goods or services and is measured using a five-point Likert scale using 19 questions about the 4-Ds, such as convenience value, quick service, response value, and trustworthiness. For each question, "very low" was set at 1 point and "very high" at 5 points. Customer trust, relationship commitment, and customer loyalty are also measured using a five-point Likert 5-point scale (1 = very low, 5 = very high) based on previous studies. Results - For customer value, trustworthiness and quick service are shown to have direct significant positive impacts on customer loyalty. For customer value and quality of the relationship (customer confidence and commitment), trustworthiness, response value, confidence value, and quick service are shown to have a significant positive impact on customer truth, in order of impact. For the relationship between customer value and commitment, quick service and response value are shown to have significant positive impact. Customer confidence has a very high positive influence on commitment. For the relationship between the quality of the relationship (customer confidence and commitment) and customer loyalty, customer confidence is shown to have more of an impact than commitment, in terms of a direct influence of customer loyalty. Commitment showed a positive impact on customer loyalty. For the relationship between customer confidence and customer loyalty, commitment showed a mediating effect. Conclusions - Many additional variables could apply; this study focused on customer value, quality of the relationship, and customer loyalty. In particular, there will be significant value in identifying the relationships among customer value, relationship quality, and customer loyalty by using impact factors for customer value; ensuring external validity by expanding denotation and applying the findings to other service industries; and undertaking continuous research. This study has limited generalization potential because the target for this survey was located only in the Seoul area.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.772-784
• /
• 2012

Marker-assisted gene pyramiding aims to produce individuals with superior economic traits according to the optimal breeding scheme which involves selecting a series of favorite target alleles after cross of base populations and pyramiding them into a single genotype. Inspired by the science of evolutionary computation, we used the metaphor of hill-climbing to model the dynamic behavior of gene pyramiding. In consideration of the traditional cross program of animals along with the features of animal segregating populations, four types of cross programs and two types of selection strategies for gene pyramiding are performed from a practical perspective. Two population cross for pyramiding two genes (denoted II), three population cascading cross for pyramiding three genes(denoted III), four population symmetry (denoted IIII-S) and cascading cross for pyramiding four genes (denoted IIII-C), and various schemes (denoted cross program-A-E) are designed for each cross program given different levels of initial favorite allele frequencies, base population sizes and trait heritabilities. The process of gene pyramiding breeding for various schemes are simulated and compared based on the population hamming distance, average superior genotype frequencies and average phenotypic values. By simulation, the results show that the larger base population size and the higher the initial favorite allele frequency the higher the efficiency of gene pyramiding. Parents cross order is shown to be the most important factor in a cascading cross, but has no significant influence on the symmetric cross. The results also show that genotypic selection strategy is superior to phenotypic selection in accelerating gene pyramiding. Moreover, the method and corresponding software was used to compare different cross schemes and selection strategies.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.181-188
• /
• 2009

Pt catalyst was adsorbed on Carbon nanofiber (CNF) by modified polyol method after acid treatment of the carbon support with $HNO_3$ and $H_{2}SO_{4}$. As the time for acid treatment increases, more oxygen functional groups on carbon surface were produced which improve the loading amount and dispersion of Pt catalyst on carbon supports. In order to inspect the effect of CNF acid treatment time on electrochemical corrosion, constant potential of 1.4 V was applied to a single cell for 30 min and the amount of $CO_2$ emitted was monitored with on-line mass spectrometry. According to the results of our experiment, more $CO_2$ was produced with Pt/ oxidized-CNF catalyst in compared to that with unoxidized-CNF. Increasing acid treatment time also induces the more $CO_2$ emission. Besides, performance degradation after corrosion test expanded with severer carbon corrosion. From the observed results, it can be concluded that the acid treatment of CNF is beneficial to catalyst loading, but it also is a significant factor declining the fuel cell durability by accelerating electrochemical oxidation of carbon support.

• The Journal of Internal Korean Medicine
• /
• v.28 no.2
• /
• pp.262-274
• /
• 2007

Objective : It has been reported that two-repeats ($IL1RN^{\ast}2$) of interleukin-1 receptor antagonist (IL-1Ra) gene is associated with ischemic stroke, and that Ala allele of the common Pro12Ala polymorphism in $PPAR-{\gamma}2$ isoform is associated with reduced risk for type 2 DM and its complications. The aim of the present study is to assess the association of IL-1Ra and $PPAR-{\gamma}2$ Pro12Ala polymorphism with the presence of ischemic stroke in the case of diabetic and non-diabetic patients. Methods : Genomic DNA was obtained from 373 healthy subjects, 157 DM subjects without ischemic stroke (known DM duration ${\ge}10$ years) and 302 ischemic stroke patients (including with DM). IL-1Ra polymorphism was analysed by polymerase chain reaction (PCR), and $PPAR-{\gamma}2$ polymorphism by restriction fragment length polymorphism after PCR. Results : $IL1RN^{\ast}1/IL1RN^{\ast}2$ genotype was associated with significantly increased risk for DM (OR=2.86, P = 0.0008) and ischemic stroke (OR=2.74, P = 0.0016). Pro/Ala genotype was associated with the reduced risk for DM (OR=0.53, P = 0.0491) and ischemic stroke (OR=0.38, P = 0.0039). They were also associated with the reduced risk for ischemic stroke in the DM patients compared with DM without ischemic stroke (OR=0.25, P = 0.0321). Conclusions : $IL1RN^{\ast}2$ allele could be an accelerating factor, not a predictive marker for ischemic stroke in type 2 DM. The Pro/Ala genotype of $PPAR-{\gamma}2$ Pro12Ala polymorphism may be associated with reduced risk for ischemic stroke with type 2 DM. Therefore it could be a useful predictive marker for ischemic stroke in Korean type 2 DM.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.189-203
• /
• 1992

Any money model should address the most important phenomenon of a monetary economy, which is the phenomenon of the rate of return dominance. Even if the holding returns on financial or nonfinancial assets are higher than the rate of return on fiat money holding, which is typically zero, people still hold and use money. In a period of accelerating inflation, number of dominating assets increases continuously, yet people continue to hold and use money. Wallace's (1980) overlapping generations model cannot address the rate of return dominance phenomenon. His model does not capture the mediun of exchange role of fiat money. In this paper, an overlapping types model of fiat money is constructed, in which different types of consumers have different preferences on different types of goods, are endowed with different types of goods, are located at seperated regions, and live for only two periods. In this model, people hold and use money despite the dominating assets, even if inflation accelates. Money in this case serves as a pure medium of exchange, whereas in Wallace's model, money serves as a pure store of value, and money disappears if a dominating asset exists. An interesting feature of the overlapping types model presented in this paper is that money does not provide a cheap approximation to an idealized and efficient real allocation. A monetary economy is always superior to a nonmonetary economy, because money helps overcome the incompleteness of the overlapping types friction. In a monetary economy, however, a pareto optimal allocation cannot always be achieved, because money cannot always overcome the overlapping types friction itself. Therefore, with the criterion of optimality of real allocations, the monetary economy is more optimal than a nonmonetary economy but less optimal than a complete Arrow-Debreu economy. This feature has important implications on macro modelling. Because of the difficulty in introducing money into a macro model in an essential and endogenous manner as in the overlapping types model of this paper, a macro model typically ignores money and studies real allocations without the money factor. The possible inefficiencies of a monetary economy, relative to a complete real Arrow-Debreu economy, may indicate differences in real allocations between the two models.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.28-44
• /
• 1998

This study was conducted to suggest the ecological restoration strategies for the disturbed landscapes by theoretical study. Especially, it is aimed to suggest three objectives for restoration by using native plants ; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Cooperation between restoration ecologists and restoration practitioners is needed to delineate a scientific approach to restoration ; (1) Being aware of published literature that describes similar work and/or establish general principles. (2) Preparedness to carry out proper experiments to test ideas. (3) Preparedness to monitor fundamental parameters in a restoration scheme. (4) Providing information about the behavior of species. (5) Publish results. 2. There are three models of succession in theories of plant succession. The tolerance and facilitation models were recommended to ecological restoration. The inhibition model applies in most secondary succession, but the actual species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. 3. The objectives of erosion control, wildlife habitat provision, and visual quality improvement are not mutually exclusive. However, many revegetation practices in the past have emphasized one of these aspects at the expense of the others. 4. A native plant community can be the model of ecological restoration. By stylization/abstraction of native plant community, trying to learn the most essential characteristics of community types - environmental factors ; dominant, prevalent, and "visual essence" species composition - in order to use such information in restoration. 5. After developing mass/spaces plan, match plant communities to the mass/space plan. In utilizing community grouping, there needs aesthetic ability to understand design elements. 6. Several hydrophytes such as Pennisetum saccharifluous, Themeda triandra, Cirsium pendulum show relatively good germination rates. In case of mesophytes and xerophytes, Arundinella hina, Artemisia princeps, Oenothera odorata and legumes seem to have quick-germinating abilities at barren sites. Pinus thunbergii, Rhus chinensis, Evodia daniellii, Alnus firma and Albizzia julibrissin can be considered as "late succession" woody plants because they show low germinating rates and slow growing habitat. 7. The seeds used for restoration should be collected within a certain radius of where it will be planted. Consideration in genetic issues in the collection and use of germplasm can increase the odds for successful restoration efforts. 8. The useful model in the "drift" pattern occurs so abundantly in naturally evolving landscapes. As one species diminishes in density, a second or third species are increased. Thus, dynamic interactions between species are created. Careful using of "drift phenomenon" in planting was recommended. 9. Virtually no stand of vegetation today is immune from the introduction and/or spreading of exotic species. Therefore, the perpetuation of a restored sites requires conscious monitoring and management. Thus, management would be the most important process in ecological restoration. 10. In order to keep the sites "natural", alternative management strategies would be applied in management ; Atenative management strategies are decelerating successional process, accelerating successional processes or modifying species composition. As management tools, mechanical, chemical, biological or environmental factor manipulation, e.g., fire could be used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.182-188
• /
• 2016

A decoy is a weapon system that can protect vessels from an enemy's torpedo. Thus, the decoy should be able to operate in the field without any failure. Because the decoy can be inoperable once its sealing is broken and water permeates inside the system, the hermetic sealing capability considering the operational environment is mandatory. To be hermetically sealed, a rubber-type O-ring is generally used in a decoy system. The sealed performance of rubber-type products, however, tends to age and deteriorate with time. Therefore, the O-ring needs to be maintained or changed periodically. This paper proposes a method to estimate the proper maintenance period using the hardness and elongation percentage, which represents the performance of the O-ring product and test data from Accelerated Life Test (ALT) of the product. The O-ring used in this paper is a NBR type, and the temperature was chosen to be the main accelerating factor as referenced in many studies. The criteria for the failure of the O-ring was set for the product to be 50% degraded compared to the initial performance. In addition, the Korean standard KS M 6518 was adopted and referenced for the preparation of test samples and the calculation of estimates. The O-ring's predicted life was simulated by analyzing the test results from a computer program, and the optimized maintenance period for the product was determined.