• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.4
• /
• pp.45-52
• /
• 2023

This study was conducted to examine the possibility of use as a structural material for ginseng cultivation facilities of recycled plastics. In order to determine the possibility that recycled plastic can replace timber used as a structural material for ginseng cultivation facilities, the specimens collected by elapsed time were compared with timber through bending tests. In addition, in order to analyze the effect of external environmental conditions on recycled plastic products, bending test was conducted with the specimens that had completed weathering test and accelerated heat aging test respectively. As a result, the bending strength of recycled plastic specimens with the elapsed time of 360 days was lower than that of timber. But bending strength of recycled plastic specimens exceeded the design allowable stress standard set by the Korea design standard (MOLIT, 2016). There was no degradation in quality of recycled plastic due to the external environment, and it was found that there would be no problem even if it was used as a structural material for ginseng cultivation facilities.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.70-75
• /
• 2001

There is a problem to be solved for improvement of durability and safety for concrete When the waterproofing and anticorrosive work of main concrete are design, the material a of construction need to be correctly applied to appropriate circumstance conditions. Epoxy mostly been used for concrete water tank structure. Lately, lots of subjects on adaption res in mortar for waterproofing and anticorrosive are under discussion. Then, we attempt to approach by evaluating and comparing every capabilities with waterproofing materials in this experiment. Capability evaluation items include the bond age and curing conditions, the bond strength after accelerated weathering test and fret impact resistance, a mount of water, seepage quan Through the experiment analysis, we found that waterproofingtity, drinking water chemicals resistance. and anticorrosive resin mortar used with glass fiber cloth, inorgar material is dominantly superior to other waterproofing materials. According to this paper, we suggest the resin mortar as a new surface treatment material water tank structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.449-455
• /
• 2001

도로교통소음의 저감을 위해 설치되는 방음벽의 성능평가를 위해서는 흡음률 및 투과손실과 같은 음향성능에 대한 평가뿐만 아니라, 풍압 및 충격하중과 같은 구조성능과 방음판 제작에 사용되는 재질에 관한 성능평가도 수반되어야 한다. 따라서, 본 논문에서는 이러한 방음벽의 성능평가를 위한 음향 구조 및 재질에 관한 시험 및 평가방법을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.61-64
• /
• 2000

FT-IR/ATR analysis shows that the oriental lacquer coating network degrades mostly in the unsaturated side chain. The rate of increase in carbonyl intensity (a measure of photodegradation) during the accelerated weathering test was substantially different for the unstabilized and stabilized samples; adding 2 wt% HALS into the oriental lacquer formulation enhanced photostabilization up to three times. Weight loss measurements, another indication of photodegradation, and SEM analysis support this conclusion. Despite the presence of the photo-stabilizer, the other properties of the lacquer were not significantly affected. In particular, the curing behavior of purified lacquer (PL) and HALS-stabilized samples is similar, although the in-situ DETA analysis showed that addition of HALS can slightly retard the cure reaction rate in oriental lacquer coating. It is hypothesized that this cure retardation may be related to the salt formation between HALS and acid of oriental lacquer.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.24-33
• /
• 1987

This study was executed to investigate scanning electron microscopic characteristics of Korean Rhus lacquer coats. With the unrefined coat, distilled water, sodium hydroxide, acetic acid, ethyl alcohol, cold-check test, and accelerated weathering were performed after refining treatment. These treated lacquer coats were discussed through observation by scanning electron microscope and the obtained results were summarized as follows: 1. Compared with unrefined coat, the refined coat of Korean Rhus lacquer showed more even surface with regular distribution of dispression. 2. Korean Rhus lacquer coat heated at $120^{\circ}C$ for 3 hours revealed no observable difference irrespective of refining and unrefining. 3. Korean Rhus lacquer coat treated by distilled water, sodium hydroxide, acetic acid. ethyl alcohol, cold-check test. and ultraviolet radiation showed significant characteristics compared with untreated coat. Especially. large deformation and checkings were observed by cold-check test and ultraviolet radiation respectively. 4. The Korean Rhus lacquer coat radiated by ultraviolet ray showed 0.11 duller and 1.41 brighter than non-radiated coat through color difference calculator.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.75-79
• /
• 2013

PURPOSES : The objective of this study is to evaluate the environmental resistance of bio-polymer concrete for use of pavement materials developed for reducing the carbon-dioxide. METHODS : The compression, tension, and bending strength tests were conducted on the bio-polymer concrete specimens with and without environmental conditioning. The specimens were conditioned using the freezing-thaw and accelerated weathering process for long period of time. To assess the resistance against chloride, the chloride ion penetration resistance tests were carried out on the bio-polymer concrete specimens. RESULTS : Test results show that the maximum difference in strength between specimens with and without conditioning is about 2.6MPa indicating that the effect of environmental conditioning on specimen strength is negligible. Based on the chloride ion penetration resistance test, the penetration quantity of electric charge of the specimens is zero and there is no ion penetration within the bio-polymer concrete. CONCLUSIONS : It is found from this study that there is slight change in strength of bio-polymer concretes before and after environmental conditioning process and no chloride ion penetration observed in these specimens. Therefore, the developed bio-polymer concretes can be applied effectively as pavement materials due to the small change of physical properties with environment change.

• 보존과학연구
• /
• s.21
• /
• pp.101-118
• /
• 2000

Stone cultural properties(pagoda, Buddhist statue etc.) is moved in original place for many reasons and restored after taking to pieces for structural safety. With the movement and restoration after taking to pieces, the cast iron is used for the sake of a fixation and horizontality. The stone cultural properties are spoiled the beauty and accelerated the weathering because of the corrosion product of cast iron. So we need to substitute for the improved property in all aspects. We are executed the corrosion test and inquired the property of material on the usable material for the shim of stone cultural properties. That is the Cast iron, Stainless steel, Titanium and Fiber Reinforced Plastics. In the result of the physical property and strength, the Stainless steel and Titanium was superior to the Cast iron. And the Stainless steel and Titanium was slower than the Cast iron in the corrosion velocity for the acid, salt and rain. If the shim is substitute the Stainless steel or Titanium for the Cast iron, the stone cultural properties are able to reduce the pollution of stone cultural properties by corrosion product and should not happen in the matter of stone pagoda.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.261-272
• /
• 2001

An ACR/HMMM film was prepared by blending high-solid ACR with curing agent, hexamethoxymethyl melamine (HMMM). An active curing reaction was observed at $170^{\circ}C$. The dynamic viscoelastic $T_{g}$ of the final film increased with the static viscoelastic $T_{g}$ of the film. The log damp value, which means a viscoelastic ratio, decreased with the increase in the curing temperature of the film. Physical properties of the films were within a suitable range for films, and by an accelerated weathering resistance test the films were proved weather resistible ones.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.87-93
• /
• 2003

Two-component polyurethane flame retardant coatings (ATTBC) were prepared by blending polyisocyanate (TDI-adduct) with ATTBs mentioned at the previous paper. Most of the physical properties of the flame retardant coatings were comparable to those of non-flame retardant coatings. Especially, the hardness, impact resistance, and accelerated weathering resistance were remarkably improved with the increase of the content of 1,4-butanediol. Coatings containing 10 and 15 wt% 1,4-butanediol, ATTBC-10C and ATTBC-15C, were not flammable in vertical flame-retardancy test. Their char area recorded 1.1${\sim}$11.6 $cm^2$ in 45$^{\circ}$ eckel burner method.