• 한국재료학회지
• /
• 제23권9호
• /
• pp.525-530
• /
• 2013

This study investigated the continuous cooling transformation, microstructure, and mechanical properties of highstrength low-alloy steels containing B and Cu. Continuous cooling transformation diagrams under non-deformed and deformed conditions were constructed by means of dilatometry, metallographic methods, and hardness data. Based on the continuous cooling transformation behaviors, six kinds of steel specimens with different B and Cu contents were fabricated by a thermomechanical control process comprising controlled rolling and accelerated cooling. Then, tensile and Charpy impact tests were conducted to examine the correlation of the microstructure with mechanical properties. Deformation in the austenite region promoted the formation of quasi-polygonal ferrite and granular bainite with a significant increase in transformation start temperatures. The mechanical test results indicate that the B-added steel specimens had higher strength and lower upper-shelf energy than the B-free steel specimens without deterioration in low-temperature toughness because their microstructures were mostly composed of lower bainite and lath martensite with a small amount of degenerate upper bainite. On the other hand, the increase of Cu content from 0.5 wt.% to 1.5 wt.% noticeably increased yield and tensile strengths by 100 MPa without loss of ductility, which may be attributed to the enhanced solid solution hardening and precipitation hardening resulting from veryfine Cu precipitates formed during accelerated cooling.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.279-287
• /
• 2018

실란트는 현대 건축물의 중요한 요소로 사용되고 있으며, 습기, 공기, 기타 물질의 침입에 대한 방벽을 제공함으로서 내후성에 대한 건물 보호의 역할을 한다. 다양한 환경에 노출되어 물리적, 화학적, 기계적 특성이 변화되어 수명이 단축되는 경우가 많으며, UV, 습기, 온도 신축 등은 내구성과 직결되는 중요한 이슈이다. 본 연구에서는 구조용 실링마감재의 내구성능을 실내에서 검증하기 위한 장비로서 외기의 환경을 모사할 수 있는 복합열화시험 챔버를 제작하였다. 황사, 산성비, 미생물에 의한 오염 등 특이 기상 상황의 재현은 어려우며 외기 환경을 100 % 모사하는 것은 불가능한 것으로 판단되며, 구조용 실링재의 옥외폭로시험방법과 복합열화시험장치에 대한 내후성 시험 결과 간의 상관관계를 통해 재현성을 확보하고자 연구하였다. 옥외폭로시험의 변위량 시험 결과 실링재의 응집력이 분해되어 연질화가 진행되는 것으로 판단되었고, 옥외폭로 1년 후 변위는 초기 물성치보다 3600 Pa에서 3배 정도 차이가 나는것을 볼 수 있었고, 비교제품의 경우 최대 7배까지 변위가 차이나는 것으로 확인되었다. 복합열화시험장치에서 변위시험결과 열화되어 탄성 및 인장특성이 감소하는 경향을 나타내었다. 변성실리콘 실링재의 경우는 현재 400 Cycle을 완료하여 옥외폭로 12개월의 물성저하를 확인하였다. 시험체의 변형은 육안으로는 확인할 수 없어 상대적으로 실리콘 실링재 제품보다 상태 안정성이 양호한 것으로 판단된다. 옥외폭로시험 결과, 복합열화시험장치가 체계화되어 관련 지침 또는 규격 등에 제안된다면, 실제 사용환경에서 12개월의 예상수명을 실내에서 3개월 미만에서 검증할 수 있는 방법으로 향후, 경제적 손실저감, 공기단축, 설계에 예상 가능한 재료의 선정 등에 활용될 것으로 기대된다.

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.783-790
• /
• 2016

IMU기반 자세결정에 있어 추정 정확도의 저하요인 중 주요한 한 가지는 운동체의 가속도이다. 이는 가속도가 크게 발생하는 경우 가속도계 신호는 더이상 수직축 참조벡터가 될 수 없기 때문이다. 이에 대한 대책으로 일부 자세추정 알고리즘에서는 가속도 보상 메카니즘이 적용되어 왔다. 가장 보편적이고 간단한 스위칭 방법부터 적응추정방식, 가속도 모델기반 방식 등이 제안되어 왔으나, 이들 보상 메카니즘에 대한 비교분석은 이루어 지지 않았다. 본 논문은 쿼터니언기반의 Pseudo 칼만필터를 바탕으로 하여 세 가지 가속도 보상 메커니즘의 성능을 비교분석하였다. 가속조건 실험 분석을 통해 다음을 확인할 수 있었다. (1) 가속구간에서의 추정정확도 저하를 방지하기 위해선 가속도 보상 메카니즘이 반드시 필요하다. (2) 단순 스위칭 방법도 상당한 효과를 보였으나, 보다 정교한 적응추정 방식과 가속도 모델방식이 동등수준으로 가장 정확한 결과를 보였다.

• 전기학회논문지
• /
• 제67권10호
• /
• pp.1322-1329
• /
• 2018

In this paper, the reliability test of three kinds of epoxy resin for GIS Spacer, which is a high voltage based heavy electric machine, AC electrical treeing experiments were performed. Three types of epoxy resins, Araldite B41, CT 5531 CI and B46, have slight viscosity differences. An non-uniform electric field, E = 1149.4 kV/mm, as the needle to plate electrode, a power source with a frequency of 1 kHz was applied to the tree electrode for accelerated deterioration. The treeing phenomena of the three kinds of epoxy resin all initiated, propagated, and destroyed by the branch tree. Epoxy Resin B46 was 145 times longer than B41 and 53 times longer than CT 5531CI. I think that the choice of epoxy resin is very important in choosing high voltage heavy electric machine insulation materials.

• Computers and Concrete
• /
• 제18권3호
• /
• pp.421-439
• /
• 2016

Corrosion of embedded reinforcing bars is recognized as being the major cause of deterioration of reinforced concrete structures. With regard to maintenance strategies of concrete nuclear structures, the monitoring of cracking remains of primary importance. Recently, authors have developed a post-treatment technique to extract crack features from continuous computations. In this paper, such technique is applied to carry out a numerical analysis of an accelerated corrosion test. Obtained results allow highlighting specific propagation and failure mechanisms that characterize corrosion-induced cracking.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.7-10
• /
• 2004

This paper investigated the possibility of quality restoration of deteriorated concrete caused by long distance delivery using chemical admixtures such as superplasticizer. AE agent and retarding agent. According to test results, long distance delivery lead to reducing fluidity and air content markedly, while setting time accelerated. Quality restoration agent(QRA) was made by combining super- plasticizer. AE agent and retarding agent with the proportion of 1:0.0025:0.1. It was confirmed that deteriorated concrete achieved quality restoration with the level of target slump, air content and setting time without strength loss when using QRA with proper amount.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.657-663
• /
• 2012

Recently, by increasing of devices which are sensitive to power quality, the deterioration of power quality has been accelerated. For this reason, the social and economic losses are increased. So not only correct measurement and evaluation, but also countermeasure for improvement of power quality is surely necessary for both electric power supplier and consumer. In this paper, the discrimination algorithm for events and variation occurred in distribution systems using S-transform is proposed. Firstly, we review for events and variations that occur in distribution system. Next, we simulate events and variations on various conditions using ElectroMagnetic Transient Program(EMTP). For the simulation, the IEEE 13 Node Test Feeder and KEPCO's distribution system is modeled. Finally, for the analysis, a modified wavelet transform known as S-transform is adopted to find out the characteristics of each events and variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1912-1914
• /
• 2005

The electrical, chemical and mechanical characteristics in transformer insulations are changed due to thermal stress. It is known that characteristics of transformer insulations is deteriorated such as decrease of dielectric strength, deterioration of dielectric constant and tensile strength of paper as transformer oil and paper are aged by thermal stress. Furthermore, chemical characteristics of them are deteriorated as like increment of moisture contents and dissolved by-products in oil, etc. In this paper we have been investigated chemical characteristics of transformer by accelerated thermal aging. For this working we have made experimental test cell and aged at a temperature up to $140^{\circ}C$ for 500 hours. The oil-paper insulation samples have been measured at intervals of 100 hours. For analysis we used Karl-Fisher titration method and high performance liquid chromatography (HPLC).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1785-1787
• /
• 2003

본 논문에서는 현재 대용량 전력변환 소자인 사이리스터는 해남-제주간의 HVDC변환소에 채용되어 운전중에 있고, BTB 및 SVC등에 채용되고 있으며, 향후 FACTS, 남북 전력계통연계, 동북아 계통연계 등 전력변환용으로 사용될 부품으로 사용범위가 날로 증가하고 있는 2,208개의 사이리스터의 수명 및 신뢰성을 평가하기 위해 고온직류 blocking 가속열화시험조건에 대해서 기술하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.41-44
• /
• 2004

Recently, in the case of domestic, for all that the deterioration environment about the carbonation of reinforced concrete structures is accelerated, systematic diagnosis and researches are not completed. And the selection techniques of repair material and method used under the situation that the indicator and the performance evaluation method are nor established are dependant on existing experience. Therefore, the purpose of this study is intend to present fundamental data for the reasonable selection of repair material and method. durability design and longevity on the deteriorated reinforced concrete structures, through computing the carbonation depth and velocity coefficient by accelerating carbonation test under various accelerating conditions and investigating the application of carbonation evaluation method. The results of this study are as follow; The resistances to carbonation are increased when the W/C ratio if lower and the treatment of surface coating is executed. And the carbonation depth and velocity coefficient according to accelerating carbonation test conditions are increased when the conditions of temperature, relative humidity and $CO_2$density are higher individually.