• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권2호
• /
• pp.221-239
• /
• 2005

General chip SMD parts(chip resistance, chip capacitor, chip varistor etc.) are very wide used electronics parts for IT units. But, failure modes are indistinct for these chip parts. In factory and field the failure modes are recognized to accidental failure mode caused by potential defect. In this paper used chip varistor ALT(Accelerate Life Test) test for verify general failure modes in chip SMD parts. Also the results are useful for general chip SMD ALT tests.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.51-67
• /
• 2005

General chip SMD parts(chip resistance, chip capacitor, chip varistor etc.) are very wide sed electronics parts for IT units. But, failure modes are indistinct for these chip parts. In factory and field the failure modes are recognized to accidental failure mope caused by potential defect. In this paper used chip varistor ALT(Accelerate Life Test) test for verify general failure modes in chip SMD parts. Also the results are useful for general chip SMD ALT tests.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.52-59
• /
• 2015

In this Study, we tested electroluminescent film to accelerate life by temperature, humidity, voltage, and frequency. We analyzed brightness data to estimate activation energy and verify it's suitability. All of the tests performed in operating condition. Because electroluminescent film is mostly degraded by fluorescent in operating condition. Two different sample groups were tested and compared to find common parameter.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.270-275
• /
• 2015

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

• Smart Structures and Systems
• /
• 제6권3호
• /
• pp.263-275
• /
• 2010

In the last decade, wireless sensor networks have emerged as a promising technology that could accelerate progress in the field of structural monitoring. The main advantages of wireless sensor networks compared to conventional monitoring technologies are fast deployment, small interference with the surroundings, self-organization, flexibility and scalability. These features could enable mass application of monitoring systems, even on smaller structures. However, since wireless sensor network nodes are battery powered and data communication is the most energy consuming task, transferring all the acquired raw data through the network would dramatically limit system lifetime. Hence, data reduction has to be achieved at the node level in order to meet the system lifetime requirements of real life applications. The objective of this paper is to discuss some general aspects of data processing and management in monitoring systems based on wireless sensor networks, to present a prototype monitoring system for civil engineering structures, and to illustrate long-term field test results.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.1-10
• /
• 1998

Testing high reliability devices under nomal operating condition is difficult, because the devices are not likely to fail in the relatively short time available for tests. For most applications it is necessary to accelerate the causes of failure by increasing a stress above its nomal value. Previous accelerated life test(ALT) plans have shown how to find optimum allocation, lowest stress and sample size subject to minimizing the variance of mean life estimator. In these ALT plans, the highest acceptable test-stress was assumed to be specified in advance by the experimenter but there is no guidance for selecting it. This assumption is, however, inappropriate for many applications. Testing devices at too-high stress levels can invalidate the extrapolation model, or introduce failure mechanisms that are not anticipated under nomal operating conditions. In this paper, we propose new 4:2:1 compromise plans using Min-Max method to minimize this risk and present minimized test-stress levels(max, middle, min), and find sample allocation based on Min-Max 4:2:1 compromise plans. In result, we compare previous 4:2:1 compromise plans specified maximum test-stress with Min-Max 4:2:1 compromise plans minimized maximum test-stress.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.361-362
• /
• 2022

As the importance of maritime communication in a cross-cultural onboard working environment grows, the importance of developing systematic supporting aids both for learning and teaching maritime English has been emphasized. Given that English communication proficiency is one of the most critical factors in determining a seafarer's competency, a systemic supporting system for enhancing maritime English communication capabilities is essential not only for them to professionally carry out and conduct assigned duties onboard, but also for them to navigate success in their lives through increased labour mobility both at sea and onshore. The APEC Seafarers Excellence Network initiates the production of Maritime English Communication Packages for seafarers in APEC regions, under the leadership of the Republic of Korea. This paper introduces the design of APEC SEN Maritime English Communication Packages, which include textbooks, audio-lingual materials, online/mobile life-long learning platform and testing aids, ultimately for upand re-skilling of seafarers to increase their employability, mobility and preparedness for the future shipping industry where globalisation is expected to further accelerate.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5039-5044
• /
• 2015

본 연구에서는 철도차량의 차축소재로 사용되는 RSA1 소재에 대한 해수 부식특성 평가를 하였다. 미국재료시험협회에서 규정한 ASTM-D1141에 해당하는 인공해수를 사용하여 3전극 셀 구조를 이용한 동전위 분극법과 임피던스 분광법을 바탕으로 산출된 부식전류밀도와 부식속도는 각각 $18.3{\mu}A/cm2$와 0.217 mm/yr이다. 이 결과에 따르면 철도차량의 일반적인 내구연한인 25년을 가정할 때 한 면에서의 차축부식량은 5mm정도로 예상된다. 패러데이법칙을 바탕으로 한 정전류 부식 가속화 시험을 통해 1,3,4년의 부식양을 인위적으로 형성하였고, 단면적 감소분을 고려하여 인장시험을 시행하였다. 탄성구간에서는 부식에 의한 기계적 특성변화가 관찰되지 않았지만 소재의 연성 값은 부식이 진행 될수록 감소되는 경향을 보였다. 본 연구 결과는 향후 해수환경에서 사용될 철도차량 설계 시 고려할 기초 부식데이타로 활용될 것으로 기대된다.