• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.459-470
• /
• 2018

Cellulose nitrates were used for folklore artifacts(ornamental beads and pipes in hatstrings, frames of eyeglasses, ornamental eyeglass cases, headband ornaments, and jeogori buttons) between the 19th and 20th centuries; however, they are susceptible to cracking, crazing, embrittlement, and crumbling due to deterioration. To consolidate and adhere deteriorated cellulose nitrate folklore artifacts, water-soluble acrylic emulsion adhesives were investigated. For consolidation, Plextol D 498, which has the lowest viscosity in low concentrations, was used. In adhesive films whose glass transition temperature(Tg) is lower than room temperature, the tensile stress and modulus decreased and the strain increased; therefore, the flexibility was high. The Plextol D 498 and Plextol D 498 and Dispersion K 52 films maintained their adhesiveness and flexibility after artificial-sunlight-accelerated ageing, and Plextol D 498 and Dispersion K 52 films hardly caused yellowing. Plextol D 498 was the most stable for accelerating ageing. A low concentration of Plextol D 498 emulsion resulted in the best permeability on the surface of cellulose nitrate, compared with other acrylic emulsions. To prevent ornamental hatstrings from cracking, crazing, embrittlement, and crumbling, a Plextol D 498 emulsion was used. After applying low concentrations(1%, 3%) of the emulsion to consolidate the fragments and high concentration to adhere the fragments, the ornamental hatstrings were protected from crumbling by deterioration, and their fragments were well-adhered. To preserve it from deterioration by oxygen and humidity, the treated ornament was sealed with an oxygen-barrier film using a low-humidity oxygen scavenger.

• Food Engineering Progress
• /
• v.22 no.4
• /
• pp.328-336
• /
• 2018

The aim of this study was to investigate the effect of pretreatments on quality of frozen peach. Pretreatments including steam blanching, water blanching, high pressure, and osmotic dehydration were applied to two varieties (Daeokgye and Hwangdo). Pretreated peaches were frozen and thawed at $-20^{\circ}C$ and $5^{\circ}C$, respectively. Steam blanching and osmotic dehydration with ascorbic acid reduced ${\Delta}E$ values without change of pH and acidity. Osmotic dehydration with sucrose decreased drip loss and increased brix. Freezing/thawing resulted in an increase of maximum force, while maximum force decreased with increasing time of steam and water blanching. Furthermore, osmotic dehydration with calcium chloride increased maximum force. High pressure decreased maximum force of Daeokgye and increased that of Hwangdo compared with non-treatment. Total polyphenol content, DPPH radical scavenging activity, and ABTS radical scavenging activity were improved by pretreatment including steam blanching, blanching, and osmotic dehydration with ascorbic acid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.810-818
• /
• 2021

A leakage current of ESS is classified mainly by the occurrence from a PCS(Power Conditioning System) section and an unbalanced grid current. The reason for the leakage current from the PCS section is a voltage change by IGBT (Insulated Gate Bipolar Transistor) switching and stray capacitance between the IGBT and heatsink. The leakage current caused by the grid unbalanced current flows to the ESS through the neutral line of grid-connected transformer for the ESS with a three limb iron type of Yg-wire connection. This paper proposes a mechanism for the occurrence of leakage current caused by stray capacitance, which is calculated using the heatsink formula, from the aspect of the PCS section and grid unbalance current. Based on the proposed mechanisms, this study presents the modeling of the leakage current occurrence using PSCAD/EMTDC S/W and evaluates the characteristics of leakage currents from the PCS section and grid unbalanced current. From the simulation result, the leakage current has a large influence on the battery side by confirming that the leakage current from the PCS is increased from 7[mA] to 34[mA], and the leakage current from an unbalanced load to battery housing is increased from 3.96[mA] to 10.76[mA] according to the resistance of the housings and the magnitude of the ground resistance.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.99-104
• /
• 2022

Recently, the domestic demand for weapon systems based on aircraft platforms is gradually increasing. In particular, the demand for effective precision guided missile(PGM) which cruises for several hundred kilometers after launch to strike the ground target is rising drastically, but it is in the early stages of development, and research based on it are limited. This paper is a study on the power converter unit(PCU) within PGM which is mounted on an aircraft platform based on MIL-STD-1760, which is an interface between an aircraft and PGM. We investigated the electrical properties and structure of the umbilical connector, and the aircraft/store electrical interconnection system. Also, the focus on the design specifications of the PCU that supplies power were described. This result 3 phase AC input, which is the state for the guided simulation power supply in the state of being mounted on an aircraft that rectification method with power factor correction(PFC) compared to bridge rectifier circuit. In the future, it may be used as a basis for power supply design on aircraft mounted weapon systems.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.38-43
• /
• 2022

The effect of introducing oxygen functional groups by oxygen plasma treatment of activated carbon on adsorption properties of cesium ions was investigated. During the oxygen plasma treatment, the frequency, power, and oxygen gas flow rates were fixed at 100 kHz, 80 W, and 60 sccm, respectively, while the reaction time was varied. Under the experimental conditions, the amount of cesium ion adsorption increased as the content of oxygen groups on C-O-C and O=C-O bonds increased when the reaction time with oxygen gas was 10 minutes. However, when the reaction time increased to 15 minutes, the oxygen functional group content decreased resulting in the decrease of the adsorbed cesium ion amount. On the other hand, unlike the oxygen content of the surface-treated activated carbon, the specific surface area and pore properties were hardly affected by the oxygen plasma reaction time. As a result, the oxygen plasma-treated activated carbon improved the cesium ion removal rate by up to 97.3% compared to that of the untreated activated carbon. This is considered to be due to the content of oxygen groups on C-O-C and O=C-O bonds introduced on the surface of the activated carbon through oxygen plasma treatment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.135-140
• /
• 2022

In addition to the stack that directly generates electricity by the reaction of hydrogen and oxygen, the fuel cell power generation system has a reformer that generates hydrogen from various fuels such as methanol and natural gas. It also consists of a power converter that converts the DC voltage generated in the stack into a stable AC voltage. The fuel cell output of such a system is direct current, and in order to be used at home, an inverter device that converts it into alternating current through a power converter is required. In addition, a DC-DC step-up converter is used to boost the fuel cell voltage to about 30~70V, which is the inverter operating voltage, to about 380V. The DC-DC step-up converter is a DC voltage variable device that exists between the fuel cell output and the inverter. Accordingly, since a constant output voltage of the converter is generated in response to a change in the output voltage of the fuel cell, the inverter can receive constant power regardless of the voltage change of the fuel cell. Therefore, in this paper, we discuss the detailed hardware design of the full-bridge converter, which is the main power source of the inverter that receives the fuel cell output voltage (30~70V) as an input and is applied to the grid among the members of the fuel cell power generation system.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2000.11a
• /
• pp.45-67
• /
• 2000

2-Amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) is a mutagenic and carcinogenic heterocyclic amino found in cooked meat. The in vivo mutagenicity and hepatocarcinogenicity of MeIQx were examined in mice harboring the lacZ mutation reporter gene ($Muta^{TM}$ Mice) and bitransgenic mice over-expressing the c-myc oncogene. C57B1/$\lambda$lacZ and bitransgenic c-myc (albumin promoter)/$\lambda$lacZ mice were bred and weaned onto an AIN-76 based diet containing $0.06\%$ (w/w) MeIQx or onto control diet. After 30 weeks on diet, only male bitransgenic mice on MeIQx developed hepatocellular carcinoma ($100\%$ incidence) indicating that there was synergism between c-myc over-expression and MeIQx. By 40 weeks, hepatic tumor incidence was $100\%$ ($17\%$) and $44\%$ ($0\%$) in male c-myc/$\lambda$lacZ and C57B1/$\lambda$lacZ mice given MeIQx (or control) diet, respectively, indicating that either MeIQx or c-myc over-expression alone eventually induced hepatic tumors. At either time point, mutant frequency in the lacZ gene was at least 40-fold higher in MeIQx-treated mice than in control mice of either strain. These findings suggest that MeIQx-induced hepatocarcinogenesis is associated with MeIQx-induced mutations. Elevated mutant frequency in MeIQx-treated mice also occurred concomitant with the formation of MeIQx-guanine adducts as detected by the $^{32}P$-postlabeling assay. Irrespective of strain or diet, sequence analysis of the lacZ mutants from male mouse liver showed that the principal sequence alteration was a single guanine-base substitution. Adenine mutations, however, were detected only in animals on control diet. MeIQx-fed mice harboring the c-myc oncogene showed a l.4-2.6-fold higher mutant frequency in the lacZ gene than mice not carrying the transgene. Although there was a trend toward higher adduct levels in c-myc mice, MeIQx-DNA adduct levels were not significantly different between c-myc/$\lambda$lacZ and C57B1/$\lambda$lacZ mice after 30 weeks on diet. Thus, it appeared that factors in addition to MeIQx-DNA adduct levels, such as the enhance rate of proliferation associated with c-myc over-expression, may have accounted for a higher mutant frequency in c-myc mice. In the control diet groups, the lacZ mutant frequency was significantly higher in c-myc/$\lambda$lacZ mice than in 057B1/$\lambda$1acZ mice. The findings are consistent with the notion that c-myc over-expression is associated with an increase in mutagenesis. The mechanism for the synergistic effects of c-myc over-expression on MeIQx hepatocarcinogenicity appears to involve an enhancement of MeIQx-induced mutations.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.231-248
• /
• 2019

The purpose of this study was to implement a cognitive stimulation activity program and examine its effects elderly people who is capable of daily life and community activities but suffering from per sistent cognitive decline on the elderly's cognitive function, self-efficacy, and depression. The purpose of this study was to help elderly people who is capable of daily life and community activities but suffering from persistent cognitive decline improve their ability to perform and adapt to activity-based tasks incorporating a variety of actions of different subdomains and difficulty levels, ac cording to their characteristics and cognitive levels. The aim of the program created was to systemati cally improve the subdomains of cognitive functions and eventually preventing these conditions develo ping into dementia in those affected. This study also enabled the subjects to improve their self-effica cy through newly gained positive perceptions and attitudes toward their own abilities by successfully expressing their experience or thoughts about circumstantially and relationally meaningful events and memories, and performing activities that promote sensory stimulations. The group activities conducted as part of the study helped the subjects reduce their symptoms of depression not only by expressing their thoughts and emotions, but also by encouraging empathy with, understanding of, and caring for others. Given that this study confirmed the potential of the cognitive stimulation program designed fo r it as a clinical intervention for elderly people with cognitive impairment, it is suggested as a useful preventive program for early stage dementia.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.57-64
• /
• 2007

This study proposes a method to estimate drilling torque during ground boring with an aid of electrical energy required for rotating a boring-auger. Ground boring is commonly used in geotechnical engineering such as preboring precast pile installation, soil-cement grouting, ground exploration and so forth. In order to understand the correlation between required electrical energy to rotate the boring auger and the drilling torque, a small laboratory apparatus was designed and a pilot study was performed. The apparatus rotates common drill bits of $D=5{\sim}25mm$ in CBR specimens. The velocity of a bit is 19 RPM and predefined using a reduction gear which connects a main rotation axis to a 25 Watts AC electrical motor shaft. In the middle of drilling the motor current increments and the drilling torque were measured and the correlation between the current and the torque was obtained through linear square fits. Based on the correlation the acquired motor current during drilling was applied to predict the drilling torque in consequent testing and the prediction results were compared to the measured torque. The comparison leads a conclusion that the motor current during drilling using electrical power may be a good indicator to estimate/determine strength characteristics of the ground.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.5-12
• /
• 2008

Biot proposed the frequency dependent formulation for the propagation of elastic waves in saturated media based on the coupled theory mixtures. Based on Biot theory, a special frequency called 'the characteristic frequency' contains unique information of the permeability of soils. The characteristic frequency is measured from I/Q (inverse quality factor) versus frequency curve by an acoustic sweep test, and the permeability of soils is computed from Biot equation. In this paper, laboratory tests are performed at The University of Mississippi using a large test box. The measured characteristic frequency is consistently obtained at 3500 Hz for mortar sands. The computed permeability of mortar sands based on Biot equation turned out 2.01 $10^{-4}m/sec$, while the permeability from the laboratory constant head test turned out 1.49 $10^{-4}m/sec$. This paper addresses the theoretical background and experimental procedure of this technique.