• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.245-249
• /
• 2005

This paper describes a boost converter cascaded high frequency link direct dc-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.201-204
• /
• 2001

In this paper, a single-phase to three-phase PWM converter topology using six switches only for low cost induction motor drive is proposed. The converter topology is of lower cost than the conventional one, which gives sinusoidal input current, unity power factor, dc output voltage control and bidirectional power flow In addition, the source voltage sensor is eliminated by controlling the deviation between the model current and the system current to be zero. The performance of the proposed converter has been demonstrated through the computer simulation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.319-321
• /
• 2009

일반적으로 가장 간단한 구조의 배터리 충전장치는 교류를 직류로 변환하기 위한 다이오드 정류기와 직류의 크기를 변환하기 위한 컨버터로 구성되어 있다. 하지만, 이러한 구조로 되어있는 충전장치의 경우 입력단 역률저하로 인하여 전력변환장치에 과도전류나 파형의 왜곡 현상 등을 초래하게 되고, 정류기와 컨버터로 구성되는 2단 전력변환구조이기 때문에 효율에도 좋지 않은 영향을 미치게 된다. 따라서 본 논문에서는 역률제어가 가능한 단일 컨버터 구조를 갖는 플러그인 하이브리드 전기자동차용 42V 배터리 충전장치를 연구하였다. 본 논문에서 연구한 배터리 충전장치는 PWM 방식의 AC-DC Buck 컨버터를 이용한 전력 변환장치와 입력단 역률제어 및 컨버터 출력을 제어하기위한 제어기로 구성되어있다. 본 논문에서 연구한 배터리 충전장치는 시뮬레이션을 통하여 역률제어 및 컨버터 출력을 확인하고 그 타당성을 검토하였다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.237-238
• /
• 2012

본 연구는 태양전지용 실리콘 결정 성장용으로 개발된 150[KW] 3,000[A]의 PWM 컨버터 시스템을 개발한 결과이다. 시스템의 구성은 3상 AC-DC 정류변환기, DC-AC 고주파 변환 단상 전파 브리지 PWM 인버터, AC-DC 변압기 중성점을 이용한 단상 전파정류기로 구성되어 있다. 입력 전압은 3상 460[V]이며, 출력은 직류 60[V], 3000[A]로 카본 저항 $2[m{\Omega}]$의 부하에 인버터의 고주파 변압기를 사용하여 스위칭 주파수가 15[KHz]로 PWM제어 방식에 의하여 전력을 제어한다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.476-479
• /
• 1999

일반적으로 3상 PWM AC/DC 컨버터는 정상상태 에러 제거 및 빠른 과도응답 특성을 얻기 위해 동기 좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전원이 불평형인 경우 입력전류와 출력전압에 고조파 성분이 나타나게 된다. 본 논문에서는 전원전압을 동기좌표계상의 정/역상 분으로 분석한 후 두 축(D, Q)의 역기전력 보상성분을 전원전압의 상태에 따라 적절하게 가변하고, 무효 전력과 고조파 전력 성분을 선택적으로 제거함으로써 입출력 시스템의 역률 및 고조파 성분을 효과적으로 보상하기 위한 간단하면서도 효과적인 제어기법을 제안하고, 시뮬레이션과 실험을 통하여 검증하였다.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.518-527
• /
• 2010

This paper presents a new technique for directly designing a linear digital controller for a single-phase pulse width modulation (PWM) converter systems, based on closed-loop identification. The design procedure consists of three steps. First, obtain a digital current controller for the inner loop system by using the error space approach, so that the power factor of the supply is close to one. The outer loop is composed of a voltage controller, a current control loop including a current controller, a PWM converter, and a capacitor. Then, all the components, except the voltage controller, are identified by a discrete-time equivalent linear model, using the closed-loop output error (CLOE) method. Based on this equivalent model, a proper digital voltage controller is then directly designed. It is shown through PSim simulations and experimental results that the proposed method is useful for the practical design of PWM converter controllers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.209-221
• /
• 1997

This paper presents a soft switching unity power factor PWM rectifier, which features reduced conduction losses and soft switching with no auxiliary switches. The soft switching are achieved by using a simple commutation circuit with no auxiliary switches, and reduced conduction loses are achieved by employing a single converter, instead of a typical front end diode rectifier followed by a boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and major characteristics analysis and experimental results of the new converter also included.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.367-370
• /
• 1987

A high-performance PWM technique in current-controlled AC to DC converter is introduced. This converter used information about source voltage vectors to make good PWM switching pattern that it can control the DC output voltage with reduced ripple factor and rapid response. In addition to reduction of harmonic current, AC input power factor can be controlled to leading or lagging by current reference. Simulation was made based on analytical approach and it showed a good agreement with theory.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.358-364
• /
• 1996

Recently, much power demand from domestic power consumer is weakening the allowable power reserve margin in summer, especially at midday for one day due to a steep increase of air cooling loads such as air conditioner. Therefore solar airconditioning system can'be considered as one of the best remedies to meet the increase of peak power. Generally in solar air conditioning system, the diode rectifier is used to build up DC link voltage from AC source. The diode rectifier is simple and cheap but it brings out the problems of low power factor and plentiful harmonics at the AC source. Also It can derate the utilization rate of solar energy because the reverse of power flow cannot be made. Hence, in this paper to overcome the peak power problem in summer and to endure good AC input characteristics, solar air conditioning system using the PWM converter is proposed. As results, obtained are the characteristics of the PWM converter such as low distorted current waveform, high power factor and bidirectional power control. And also the stability of proposed system is verified by examining the dynamics of step load change and power reversal testing. (author). refs., figs., tabs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.