• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1222-1227
• /
• 2002

Noise barrier is used to reduce traffic noise. The effect of a noise barrier depends not only on the materials, but also on the physical properties such as density, height and degree of absorption, etc. Typical absorptive noise barrier is used sound absorbing material, such as glass wool and mineral wool. The goal of this study is to develope excellent absorptive noise barrier using a polyester. Laboratory measurements were peformed with various thicknesses, density and layer of absorber in a reverberation room.

• 소음진동
• /
• 제8권1호
• /
• pp.146-156
• /
• 1998

자동차의 폭발적인 증가와 아울러 경부고속전철시대를 맞이함으로 인하여 소음공해는 큰 사회적 문제로 대두되고 있다. 본 연구는 이러한 소음공해에 대한 해결책의 일환으로 효율적인 방음벽을 연구 하는데 그 목적이 있다. 방음벽의 연구는 먼저 반사형 방음벽과 흡음형 방음벽에 대한 소음저감효과 를 산정한 다음, 흡음재료를 사용함으로서 감소되는 소음저감 효과를 산정하는데 큰 의의가 있다. 본 연구결과에 의하면 방음벽의 높이에 비하여 음의 파장이 대체로 짧을 때는 방음벽의 상단부분에 흡음재를 설치하면 방음벽 전체에 흡음재를 설치한 것과 같은 효과가 있다는 결론을 얻었다. 도로교통소음은 평균주파수가 550Hz 이므로 이때 파장은 60cm 정도이다. 방음벽 높이를 4m로 설치했을 때 방음벽 상단에서 60cm 정도만 흡음재를 사용하면 4m전체의 방음벽에 흡음재를 사용한 것과 같은 효과가 있는 것으로 나타났다. 흡음재를 사용한 소음저감의 효과는 점음원이고 수음자의 위치가 $135^{\circ}$ 일 때 평균 8dB(A)정도이고, 선음원일때는 평균 3dB(A)정도의 효과가 있는 것으로 나타났다 이러한 흡음형의 방음벽은 경제적일 뿐만 아니라 방음벽의 높이를 최소한 1m이상 줄일 수 있으므로 국토를 고도로 이용해야 되는 우리 나라의 여건에 대단히 효과적인 방음벽이라 사료된다.

• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.94-100
• /
• 2008

Noise barriers are being used more often to solve problems of noise pollution from traffic noise. Several types of noise barriers are being installed to increase the cost-effectiveness of noise barrier installation. In this study, the insertion loss is analyzed to evaluate the effectiveness of the noise barrier by using the BEM. In order to check the validity of the BEM, the BEM and Lam's theoretical analysis are compared with measurement, which is performed in the anechoic chamber for the 1/10 scale-down model, and good agreements are obtained. By using the two dimensional boundary element method, the insertion loss is calculated and analyzed for several typical noise barriers such as the vertical barrier, the barrier with an oblique edge on top, the T-shaped barrier and the barrier with interference device on top. With these analyses, it is possible to design more cost-effective noise barriers appropriate for a particular area.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.577-583
• /
• 2002

We have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height of noise barrier. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance use of an experiment and evaluation for the reduction of railway noise. In this paper the frequency characteristic of interference device of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test around of railroad.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.134-139
• /
• 2002

We have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance make use of an experiment and evaluation for the reduction of highway traffic noise. In this paper the frequency characteristic of interference device of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test at highway.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.844-848
• /
• 2001

Before we have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance make use of an experiment and evaluation. In this paper the performance of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.192-197
• /
• 2001

Before we have made known the study of shape development of interference device for vehicle noise control. It's primary object greatly attenuate the noise due to transport vehicle by small products installed on the noise barrier edge. Also, it is able to improve the insertion loss of a noise barrier without increasing the height. The present time, we set up a newly manufactured products on the noise barrier edge and testify to it's the performance make use of an experiment and evaluation. In this paper the performance of noise barriers with attached newly developed products in terms of shape, absorptive material and split panel, are examined using field test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1778-1783
• /
• 2000

When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.762-765
• /
• 2005

The absorption materials have been used to enhance the performance of a noise barrier and improve the room acoustics. In this study, 6 products of absorptive materials generally used in Korea were chosen, and their absorption performance were tested in various conditions, that is, it was measured while changing thickness, density and air gap in their back, and measured with or without facing on their face. Finally, the absorption coefficients were compared by reverberation and impedance tube method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.537-542
• /
• 2000

When visual intrusion Is an Important factor, it is desirable to find alternative methods of Improving the insertion loss of a noise barrier without Increasing the height. Therefore, the primary object of the work attenuate the noise due to railway by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, we examined using the boundary element approach. Also, the scale models are mounted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.