• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.294-301
• /
• 2003

The energy concept has been applied to the reported experimental results of six different structural steel connections to investigate the characteristics of system-dependent energy curve and energy absorption efficiency. For this the concept o( static and kinematic energy absorption efficiency has been defined. The present paper closes with the implication of the necessity of further investigation to extend the energy concept to reach the engineering practice.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.92-97
• /
• 2003

The purpose of this study is heavy metal absorption of recycled PET(poly ethylene terephatalate) NWF(non woven faric). The results of test are summarized as follows; Heavy metal abworption rates in Ni ions were higher then Zn and Cu ions, whereas heavy metal absorption rates by sulfonation times were not different. The heavy metal absorption times have a higher tendency from 60 min to 120 min. There were significant negative correlations among the amount used CSA(Chloro Sulfuric Acid) and the amount of absorption Zn(r = -0.33784, p < 0.05), Cu(r = -0.61177, p < 0.01) ions, whereas correlations between heavy metal absorption rates and sulfonation times were not significant. There were significant positive correlations among the amount of absorption Zn ions and the amount of absorption Ni(r = 96475, p < 0.014), Cu(r = 0.51614, p < 0.01) ions, likewise the positive correlations between the amount of absorption N ions and the amount of absorption Cu(r = 0.54766) ions were significant(p < 0.01).

• 설비공학논문집
• /
• 제12권3호
• /
• pp.267-276
• /
• 2000

A numerical study has been carried out to find out the optimal design condition of a solar absorption cooling system. The system was composed of solar collectors and an absorption chiller with LiBr/water The System performance with commercial single effect(SE) cycle and a new single effect/double lift(SE/DL) cycle utilizing low temperature hot water was calculated and compared. It was found that the required solar collector area grew exponentially as the overall heat loss coefficient of solar collectors increased. For instance, the required area for cooling capacity of 1 USRT was $17m^2$ if heat loss coefficient was 4 W/$m^2\;cdot\;K$. If heat loss coefficient was doubled($8\;W/m^2\;cdot\;$K), the required collector area was increased by 6 times($100m^2$) .It was also found that the SE-cycle as the heat loss coefficient of solar collectors increased. Generally, a SE/DL-cycle seems to be more advantageous than a SE-cycle if loss coefficient of solar collector is greater than 4 W/$m^2\;cdot\;K$.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.41-47
• /
• 2002

A model of simultaneous heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water-cooled vertical plate absorber was developed. The model can predict temperature and concentration profiles as well as the absorption heat and mass fluxes, the total heat and mass transfer rates and the heat and mass transfer coefficients. Besides, the effect of operating condition on absorption mass flux has been investigated, with the result that the absorption mass flux is increased as the inlet cooling water temperature decreases, the system pressure increases and the inlet solution concentration increases. And among the effects of operating parameters on absorption mass flux, the effect of inlet solution concentration is dominant.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.297-298
• /
• 2006

Water leak for the water-cooled generator stator windings affects seriously the availability and the reliability of power plants. Generally, water absorption test is conducted in the power plant during outage in order to confirm if leak part is in the bars or not. In this paper, it is described that the capacitance of winding bars is measured by using the developed water absorption instrument system and the water absorption of winding bars is evaluated by using the stochastic methods. The good results by proposed diagnosis technique can be got. It is expected that the reliability of diagnosis for water absorption is increased if the proposed methods are applied to evaluate the water absorption of stator winding bars.

• 약학회지
• /
• 제38권2호
• /
• pp.114-122
• /
• 1994

A study on the absorption mechanism of cefixime(CF), an oral ${\alpha}-amino$ group deficient cephalosporin antibiotic, has been undertaken through the rat jejunum and nasal cavity using an in situ simultaneous perfusion technique developed in our laboratory. CF was well absorbed in the jejunum and nasal cavity of rats at pH 5.0, but not at pH 7.0. CF absorption was studied over four orders of magnitude in concentration to determine saturability. Disappearance of CF in the perfusate followed first-order kinetics at all tested concentrations. The apparent first-order absorption rate constant was found to be dependent on the concentration over the range of $0.1\;mM{\sim}3\;mM$ in the jejunum and nasal cavity of rats. Inhibitors were added to determine the competitive inhibition of CF absorption. The presence of L-tyrosine, L-phenylalanine, alanine-alanine, glycine-glycine and cefadroxil produced the significant inhibition of CF absorption in the nasal cavity and jejunum. However, there was no evidence of the inhibition in the presence of cefazolin. In addition, The CF absorption in the nasal cavity and jejunum was inhibited significantly by ouabain and 2,4-dinitrophenol(DNP). This study suggested that CF is absorbed across the rat nasal cavity and jejunum by carrier-mediated transport mechanism and energy consuming system.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.581-589
• /
• 2003

Film absorption involves simultaneous heat and mass transfer in the gas-liquid system. While the non-absorbable gas does not participate directly In the absorption process. its pretence does affect the overall heat and mass transfer. An experimental study was performed to investigate the heat and mass transfer characteristics of LiBr-H$_2$O solution flow ing over 6-row horizontal tubes with the water vapor absorption in the pretence of non-absorbable gases. The volumetric concentration of non-absorbable gas, air, was varied from 0.17 to 10.0%. The combined effects of the solution flow rate and its concentration on the heat and mass transfer coefficients were also examined. The presence of 2％ volumetric concentration of air resulted in a 25% reduction in the Nusselt number and 41% reduction in the Sherwood number Optimum film Reynolds number was found to exist at which the heat and mass transfer reach their maximum value independent of air contents. Reduced Nusselt and Sherwood numbers. defined as the ratio of Nusselt and Sherwood numbers at given non-absorbable gas content to that with pure water vapor, were correlated to account for the reduction in the heat and mass transfer due to non-absorbable gases in a falling film absorption process.

• 공업화학
• /
• 제1권1호
• /
• pp.30-34
• /
• 1990

이 논문은 새로운 에너지 개방을 위한 금속수소화물에 대한 기초연구를 요약한 것이다. $DiNi_5$ 합금의 수소 흡수 및 탈착 특성을 조사하였다. $30^{\circ}C$에서 $DiNi_5$ 합금의 최대 수소흡착량은 H/M=1.04였고 $30^{\circ}C$에서 히스테리시스가 가장 작았다. 이 합금의 수소 흡 탈착 능은 우수하였다. $30^{\circ}C$에서 수소의 흡 탈착 반복회수는 약 9000번 정도 였으며, 수소 탈착속도는 $40^{\circ}C$에서 최대를 보였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.56-66
• /
• 1998

The absorption process of water vapor in a liquid film is an important process in LiBr-Water absorption system. The composition of the gas phase, in which a non-absorbable gas is combined with the absorbate, influences the transport characteristics. In the present work, the absorption processes of water vapor into aqueous solutions of lithium bromide in the presence of non-absorbable gas are investigated. The continuity, momentum, energy and diffusion equations for the solution film and gas are formulated in integral forms and solved numerically. It is found that the mass transfer resistance in gas phase increases with the concentration of non-absorbable gas. However the primary resistance to mass transfer is in the liquid phase. As the concentration of non-absorbable gas in the absorbate increases, the interfacial temperature and concentration of absorbate in solution decrease, which results in the reduction of absorption rate. The reduction of mass transfer rate is found to be significant for the addition of a small amount of non-absorbable gas to the pure vapor, especially at the outlet of tube where the non-absorbable gas accumulates. At higher non-absorbable gas concentration, the decrease of absorption rate seems to be linear to the concentration of non-absorbable gas.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.197-202
• /
• 2007

본 연구는 그 동안 주로 석유화학의 개질공정 등에서 적용되었던 이산화탄소 흡수분리기술을 연소배가스에 적용하기 위한 기본적인 연구로서, 이산화탄소의 흡수분리공정에 일반적으로 많이 사용되는 흡수제인 MEA(mono-ethanol amine)를 연소배가스에 적용하였을 경우 예상되는 열화, 재생에너지 및 흡수능력 등의 문제점을 개선하기 위하여 거론되는 입체장애아민인 AMP(2-amino 2-methyl 1-propanol) 수용액과 이산화탄소와의 흡수평형 특성을 비교 평가하였다. 실험결과 AMP는 MEA에 비하여 이산화탄소의 흡수능력이 반응 메카니즘에 의하여 약 2배 정도 증가함을 확인하였고, 연소배가스와 같은 저농도 이산화탄소 흡수분리공정 설계에 필요한 흡수평형자료를 부분적으로 제시하였다.