• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2013

Objectives: This study was conducted to estimate quartz concentrations in the airborne respirable dust from concrete manufacturing industries and to compare performance of two analytical methods, direct on filter(DOF) and the transfer methods in the Fourier Transform Infrared Spectroscopy(FTIR). Methods: Total 36 area samples were collected from 8 concrete manufacturing industries. Each respirable dust sample was collected by a 25 mm cassette attached to a 10 mm Dorr-Oliver nylon cyclone. The quartz content was estimated using the intensity of the absorption peak of quartz at $799cm^{-1}$ by FTIR. Results: By the comparison of quartz content in respirable dust between the two methods, the results of using DOF method were higher than that of transfer method. And the result of quartz concentrations in respirable dust estimated by DOF method were mostly higher than those by transfer method. Statistically significant difference of quartz concentrations in respirable dust were not found in shakeout, input, loading and transporting processes by two methods. But quartz concentrations in the molding process had the statistically significant difference between DOF and transfer method. Conclusions: The results of the study is suggested that, it be needed to correct the influence of the interferences in order to establish the DOF method when interfering minerals have an effect on quantitative analysis of quartz in respirable dust by the direct on filter method with FTIR.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.17-25
• /
• 2010

We studied on the watertightness improvement of cementitious material for durability enhancement of concrete. For improvement of watertightness of OPC and OPC with fly ash, we used various materials with watertightness properties to OPC and OPC with fly ash. The performance of watertightness improvement of cementitious materials closely related to formation of CSH by pozzolanic reaction and to reducing of size of contact angle in cement pore by using organic fatty acid. And volume of CSH formation at early hydration have an influence of watertightness improvement and reduction of long-term water absorption rate. In using of fly ash, improvement of workability by using the spherical fly ash caused to densify on the structures of cement material and CSH formation by pozzolanic reaction and cement using fly ash also caused watertightness improvement of cementitious materials. For improvement of concrete durability by watertightness, cementitious materials need using watertightness materials and at using fly ash, also it have to the effect of improvement of watertightness of cementitious materials by pozzolanic reaction.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.163-177
• /
• 2020

Concentrically Braced Frames (CBFs) are commonly used in the construction of steel structures because of their ease of implementation, rigidity, low lateral displacement, and cost-effectiveness. However, the principal disadvantage of this kind of braced frame is the inability to provide deformation capacity (ductility) and buckling of bracing elements before yielding. This paper aims to present a novel Composite Buckling Restrained Fuse (CBRF) to be utilized as a bracing segment in concentrically braced frames that allows higher ductility and removes premature buckling. The proposed CBRF with relatively small dimensions is an enhancement on the Reduced Length Buckling Restrained Braces (RL-BRBs), consists of steel core and additional tensile elements embedded in a concrete encasement. Employing tensile elements in this composite fuse with a new configuration enhances the energy dissipation efficiency and removes the tensile strength limitations that exist in bracing elements that contain RL-BRBs. Here, the optimal length of the CBRF is computed by considering the anticipated strain demand and the low-cyclic fatigue life of the core under standard loading protocol. An experimental program is conducted to explore the seismic behavior of the suggested CBRF compare with an RL-BRB specimen under gradually increased cyclic loading. Moreover, Hysteretic responses of the specimens are evaluated to calculate the design parameters such as energy dissipation potential, strength adjustment factors, and equivalent viscous damping. The findings show that the suggested fuse possess a ductile behavior with high energy absorption and sufficient resistance and a reasonably stable hysteresis response under compression and tension.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.7
• /
• pp.1076-1083
• /
• 2007

The effects of barley and oat feeding in table duck were investigated. During a 49-day growing period a corn-based diet was supplemented by 45% barley and 45% oats (isonitrogenously and iso-energetically), respectively. Daily feed intake, FCR-, and weight gain were measured. Abdominal fat, liver, and gizzard weights were determined and dry matter, protein, fat content and fatty acid composition of femoro-tibial muscles and liver fat were measured on the $35^{th}$, $42^{nd}$ and $49^{th}$ days of age. Feeding 45% barley caused a decrease of growth rate ($p{\leq}0.05$) during the first 4 weeks, which was followed by a rapid, compensatory growth from the $6^{th}$ week of age ($p{\leq}0.05$). Both barley and oat supplementation increased protein ($p{\leq}0.05$), while decreasing fat ($p{\leq}0.05$) and dry matter ($p{\leq}0.05$) content of the liver. Feeding of 45% oats in the diet decreased the monounsaturated fatty acid ($p{\leq}0,05$) and increased the n-6 ($p{\leq}0,05$), n-3 ($p{\leq}0,05$) and total polyunsaturated ($p{\leq}0,05$) fatty acid content of the intramuscular fat owing to the high proportion of soluble non-starch polysaccharides (NSP) in the diet. This might be explained by the more pronounced decrease in digestibility of saturated than unsaturated fatty acids in birds fed a soluble NSP-enriched diet. This result might be caused by the "cage effect" of soluble NSP trapping the bile salts which are more important for the absorption of saturated than polyunsaturated fatty acids.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.157-162
• /
• 2018

The partial molar volumes of an antidepressant in Halobacteriun Halobium and in suspensions of several lipids have been determined at $25^{\circ}C$ it using a excess volume dilatometer. The potency of general antidepressant, Fluoxetine has long been known to correlate with lipid solubility. Denaturations of the vesicle, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by absorption changes at 280 nm and fluorescence changes at 330 nm with excess volume dilatometer. The 1H NMR analysis of viscous polymer solutions by diffusion interchange is the important step by measurement. The partial molar volume and particle size of Fluoxetine in Halobacteriun Halobium were measured to be positive. An antidepressant can prevent diseases that produce a variety of cognitive and mental symptoms based on low morale and depression, resulting in poor daily performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.378-387
• /
• 2009

To investigate the effects of sago palm pith (SPP) substitution of corn in the diets on intake, digestibility, rumen fermentation characteristics, nitrogen balance and microbial N Supply, five ruminally fistulated Southern indigenous cattle (mean initial BW = 226${\pm}$5 kg) were randomly assigned to a 5${\times}$5 Latin Square Design to receive five diets, $T_1$ = concentrate with 0% SPP, $T_2$ = 25% SPP, $T_3$ = 50% SPP, $T_4$ = 75% SPP and $T_5$ = 100% SPP, of dietary dry matter, respectively. Plicatulum hay (PH) was offered ad libitum as the roughage. A metabolism trial lasted for 21 days during which liveweight changes and feed intakes were measured. Based on this experiment, there were no significant differences (p>0.05) among treatments groups regarding total DM intake (OMI, NDFI and ADFI) and digestion coefficients of nutrients (DM, OM, CP, NDF and ADF), while total DM intake (% BW) was significantly (p<0.05) higher as higher levels of SPP were incorporated into diets. Rumen parameters (ruminal temperature, pH, glucose, packed cell volume, volatile fatty acid and rumen microorganism populations) were similar among treatments (p>0.05), whereas $NH_3-N$, blood urea nitrogen and molar proportion of propionate concentrations were significantly (p<0.05) higher as higher levels of SPP were incorporated into diets. The amount of N absorption, N retention and microbial protein synthesis were similar among treatments. These results indicate that SPP can be included in diets for Southern indigenous cattle to supply up to 100% of supplemental corn when fed with PH without negative impact on animal performance and it was a good approach in exploiting the use of local feed resources for beef cattle production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.373-381
• /
• 2020

There is a need for newer feed additives due to legal prohibition on inclusion of growth promoting antibiotics in livestock diets in several countries due to antimicrobial resistance. In this context, rare earth elements (REE) have gained attention among animal nutritionists as potential growth promoters. Currently, several studies have reported better weight gain, milk production, egg laying capacity and feed conversion efficiency among different breeds of farm animals following supplementation with REE, with however largely inconsistent results. Furthermore, REE supplementation has also shown to improve ruminal fibrolytic and proteolytic activities as well as flavor of meat with negligible residues in edible tissue, however the mechanism behind this action is still unclear. According to existing research, due to their poor absorption and similarity with calcium REE might exert their action locally on gut microbial populations within the gastrointestinal tract (GIT). Moreover, REE have also shown anti-inflammatory, anti-oxidative as well as immune stimulating effects. The present review aims to broaden the knowledge about use of REE as feed additives for livestock and sum up efficacy of REE supplementation on performance and health of animals by comparing the findings. Till date, researches with REE have shown properties that make them a promising, new and safe alternative feed additive but further exploration is recommended to optimize effects and clarify discrepancy of various results before practical proposals can be drafted.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.369-373
• /
• 2005

The objectives of the current work is to understand the factors impacting the formulation and performance of a Carbopol mucoadhesive buccal delvery system for a model peptide drug, $[D-Ala{^2},\;D-Leu{^5}]$enkephalin (DADLE, Mw=569.7) with comparable chemical and enzymatic stability. Specifically, in vitro buccal DADLE delivery from the cross-linked poly(acrylic acid) (PAA) hydrogel system was characterized. In addition, the influences of several penetration enhancers on the ex vivo buccal absorption of DADLE were also studied. In this study, the PAA hydrogels generally swell to 100% of their original weight in the phosphate pH 7.4 buffer. The water penetration into the PAA hydrogel occurred based on a zero-order kinetics for the first 60 min and steadily decreased afterwards. From the release study, it can be seen that the initial DADLE release was so rapid and the rate of release of DADLE decreased as the time elapsed. The porcine buccal tissue was found to be permeable to DADLE with a flux value of $0.07%/cm{^2}/hr({\pm}0.01\;SD)$. From the ex vivo diffusion study, it was found that sodium taurodihydrofusidate showed a greater degree of enhancement compared to the phospholipids with an Enhancement Ratio (ER) of 8.7 compared to 2.7 and 1.9 for didecanoylphosphatidylcholine and lysophosphatidylcholine, respectively. The work encompassed within this paper has demonstrated the feasibility of using the PAA hydrogel delivery system with its good mucoadhesive properties for the buccal delivery of peptides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.356-363
• /
• 2017

Blast furnace slag(BFS) is a by-product generated during the manufacture of pig ion, and is divided into water-cooled slag(WS) and air-cooled slag(AS) by the coking method of BFS. In this study, concrete specimens with ternary binders were produced at the various replacement levels of cement by AS. Various mechanical properties of concrete, such as compressive and split tensile strengths, absorption and water permeable pore, were measured. In addition, the chloride ions penetration resistance and carbonation resistance were tested to evaluate the durability of concrete incorporating AS. The experimental data indicated that the use of AS up to a maximum of 10% replacement level enhanced the concrete performance. However, a higher replacement of AS exhibited poor mechanical properties and concrete durability.