• Korean Journal of Medicinal Crop Science
• /
• v.19 no.6
• /
• pp.446-455
• /
• 2011

Galgeun-tang (GGT) is a traditional medicinal formula that is widely prescribed to treat cold, asthma, and hives in Korea. Fermented herbal medicines can be made more effective than normal herbal medicines by increasing the absorption and bioavailability of the active compounds. In this study, we fermented Galgeun-tang to produce bioconversion constituents using Lactobacillus plantarum (GGT144), and found that four peaks were decreased, three peaks were increased and two new peaks appeared in the HPLC-DAD chromatogram. After HPLC-DAD-guided fractionation of the newly-appearing compounds (1 and 5) and the increased (6, 7, and 9) compounds, the structure of the compounds was determined using NMR and MS. Using this approach the compounds were identified to be pyrogallol (1), daidzein (5), liquiritigenin (6), cinnamyl alcohol (7), and formononetin (9), respectively. In addition, the decreased compounds were identified to be daidzin (2), liquiritin (3), ononin (4), and cinnam aldehyde (8) using HPLC-DAD analysis with standard compounds. The high performance liquid chromatography method was used to quantify the nine constituents in GGT and GGT144. All calibration curves of the standard compounds displayed excellent linearity with a $R^2$ > 0.9968.

• Journal of Haehwa Medicine
• /
• v.18 no.2
• /
• pp.1-12
• /
• 2009

Most of the cholesterol is synthesized by liver in the body while about one of third is taken via dietary. The main functions of cholesterol is to protect membranes in cell surface, avoid the arterial bleeding by hypertension, and prolong the life of erythrocytes, and so on. However, overload of cholesterol leads to arteriosclerosis associated with leading death cause. Lack of physical activity, emotional and environmental stress, and low intake of protein or vitamin E induce the unbalance between HDL- and LDL-cholesterol so become a basis of ischemic disorders in heart, brain and elsewhere in the body. So far, four major classes of medications for hyperlipidemia are HMG-CoA reductase inhibitors (statins), bile acid sequestrants, nicotinic acid, and fibric acids. The statins can lower LDL and levels triglyceride, but may induce myopathy and an elevation of liver enzyme levels. The bile acid sequestrants lower LDL levels and raise HDL levels with no effect on triglyceride levels but side effects of gastrointestinal (GI) distress, constipation, and a decrease in the absorption of other drugs. Nicotinic acid and fibric acids lower LDL and triglyceride levels with showing flushing, hyperglycemia, hyperuricemia, GI distress, and hepatotoxicity dyspepsia, gallstones, myopathy, and unexplained noncardiac death as adverse effects. Above western drugs lower cholesterol by 15 to 30% while all have notable adverse effects. In traditional medicine, hyperlipidemia is regarded as retention of phlegm and fluid disease. Etiology and pathogenesis of hyperlipidemia is basically based on Spleen-Deficiency and Phlegm-Stagnation, accumulation and stasis of -heat, and Qi & blood stagnation induced by Phlegm-damp, water-dampness, and blood stasis. Thereby, strengthening Spleen and dissolving Phlegm, clearing away heat and diuresis, and supplementing Qi and activating blood circulation are commonly used therapeutic methods for hyperlipidemia. The traditional herbal medicine, have been used for patients with CVA, hypertension or hyperlipidemia in Oriental hospital or Oriental clinic. The lock and key theory is used to develop most of western medicine, however many diseases are caused by mixed factors in body-complex system. We expect that Oriental pharmacological theory could be newborn as a novel drug showing high advantage of blood levels of lipidsand QOL of performance without side effects.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1192-1192
• /
• 2001

Usually there are many furnaces in a ethylene plant and the performance of total furnaces can be improved if that of each furnace is monitored and controlled. For this purpose real-time data for the effluent of each furnace is necessary. However, it is very difficult to analyze the total effluent stream of a ethylene furnace by real-time because it is composed of so many components including heavy hydrocarbons. Fortunately, component data for lighter hydrocarbons is much more important than that of heavier ones for ethylene furnace. In ordinary case, the on-line measurement of light hydrocarbons is performed by on-stream gas chromatography, after separating gas-phase part from effluent. The main and important components of gas-phase are Methane, Ethane, Ethylene, and Propylene. If we can use Near-infrared spectroscopy for measuring those components within good reproducibility, shorter analysis time, better repeatability, easier maintenance and lower cost will make Near-infrared (NIR) analyzer replace on-stream gas chromatography in this process. Although it is known to be very difficult to measure gas components because of very weak absorption in Near-infrared region, we have studied the feasibility of the application of NIR for the measurement of gas-phase hydrocarbon in the effluent of ethylene furnace. The samples were obtained from actual process and NIR spectra were collected over 1100 to 2500nm range. NIR spectra and calibrations showed and demonstrated the possibility of extending NIR spectroscopy to the measurement of gas-phase hydrocarbon in the effluent of ethylene furnace.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.54-62
• /
• 2011

The metalized wood composites with natural grain of imported Juglans nigra, which was impregnated with low melting alloy were manufactured and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth (Bi) and tin (Sn) which are harmless to humans, was applied to this new composites. The composites showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, abrasion resistance, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $186^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of $30kgf/cm^2$. This metalized wood composites showed 7 times higher density than control, great increase in bending strength from $131.8N/mm^2$ to $192.3N/mm^2$, and great increase in hardness from $18.2N/mm^2$ to $90.4N/mm^2$. The composites demonstrated not only high emissivity of 91%, high shilding effectiveness of 92.59∼99.99%, high fire resistance but also great decrease in abrasion depth, water absorption and thickness swelling.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.15-24
• /
• 2010

Photovoltaic solar cells are all in the incident because they are not converted into electrical energy, high-efficiency solar cells in order to reduce the loss of elements must be. Significant factor in the loss of solar cells, optical loss and electrical loss can be divided into. Optical losses occur when the sun will be joined on the surface of the reflection, the shadow loss due to electrodes, and the losses are in the solar wavelengths. Commercialization is currently the most common solar cells on the front of the light incident on the electrode is formed. Therefore, the shadow caused by the electrode to cover the dead area of the sun, due to factors that hinder the absorption of sunlight which is shadowing them and conversion efficiency of solar cells is the inhibition factor. These barriers to eliminate the electrode linewidth reduces the shadowing to reduce, but simply of the electrode line width is reduced electrode area by reducing the series resistance elevates this because to improve the electrode Aspect ratio(height/width) to increase Ag development of paste is required. In this study, aspect ratio of screen-printing method to increase the electrode Ag paste composition of the binder for the characterization of rheology in the shadow of the electrode by reducing the optical loss of the photoelectric conversion efficiency of solar cells to boost the performance measures was. Properties and printability of the paste, the binder resin sintered characteristics that affect the thermal properties are excellent with a good screen printability acrylic resin, ethyl cellulose, using a resin were evaluated. Prepared paste rheology properties, was formed to evaluate the electrode conductivity and aspect ratio.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.90-98
• /
• 2007

The objective of this investigation was to reveal the cause of the faulted cable(LV URD(low voltage underground) cable). For the analysis, various types or equipments such as external pattern, thermal pattern, surface structure, thermal analysis, and property distribution were deployed. The international standards and the specification provided by the manufacturer of faulted cable were examined whether it fit the standards. The summary is as follows. (1) Discovered as a factor lowering insulation performance of the faulted cable: minimum thickness of the insulation layer specified by IEC 60502-1 and IEC 60811-1-1 was not fit. (2) Infrared absorption peaks measured by FT-IR spectrometer revealed that the measurements made for the same material did not conform and it is an important basis for proving heterogeneous composition of the insulation material. (3) It was found that PVC bedding was thermally fragile and therefore long term exposure at the site could cause similar fault pattern.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.672-679
• /
• 1996

In order to examine the quality attributes of native-bee honey, proximate composition and mineral components were analysed by atomic absorption spectrometry, ion chromatography and high performance liquid chromatography. The analytical results showed that native-bee honey is higher in the contents of crude ash, crude protein and diastase activity than those of foreign-bee honey. The principal mineral components of honey were Ca, Mg, Na, K and Cl, which showed that almost all the mineral components were contained higher in the native-bee honey than the foreign-bee honey samples. When we calculated K/Na ratio, we could make a clear distinction between native-bee honey and foreign-bee honey. The K/Na ratio turned out to be more than 10 in 6 samples of native-bee honey, whereas the ratio of foreign-bee honey showed up less than 1.5 in all 3 samples.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.117-126
• /
• 2006

The purpose of this study is to develop a badge-type passive sampler for the measurement of short-term nitrogen dioxide and to evaluate its performance. The principle of the method is a colorimetric reaction of nitrogen dioxide with sulfanilic acid, N-1-naphthylethylendiamine, and phosphoric acid. First, it has been shown that the filter paper should be rinsed with ultrapure water and ultrasound, and then dried in a vacuumed desiccator. The concentration and volume of absorption reagent (triethanolamine) were $20\%$ and 100 ${\mu}L$, respectively. The extraction time was determined as 60 min. Second, duplicate measurements (n= 116) were carried out for evaluating the precision of the passive sampler. The relative error and the correlation coefficient between duplicates are $3.4\pm 3.0\%$ and 0.994, respectively. In addition, the $95\%$ confidence interval of intraclass correlation coefficient and the estimated value are 0.992$\sim$0.996 and 0.994, respectively. Third, a paired t-test was carried out for evaluating the accuracy of the passive sampler (n=40). In the result of the test, the $95\%$ confidence interval of the difference was -1.710 ppb <$\gamma$< 0.788 ppb. Finally, the average concentration of blanks, measurement detection limit, limit of detection, and limit of quantification are $2.4\pm 0.4$ ppb, 104 ppb, 3.8 ppb, and 7.0 ppb, respectively.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.6
• /
• pp.117-128
• /
• 2014

This is the case study of SATREC INITIATIVE company which is the unique domestic production of commercial satellites. We examined the path and pattern for accumulation of technological capability and technology learning process. This case study show that the process of technological innovation and their influencing factors. First, the technological learning of the satellite industry follows the stage of technological acquisition, absorption, improvement and is embodied by the technological capability. Second, accumulated technological capability of the satellite industry influences the technology innovation. Third, the top management team(TMT) affects the technological learning and technological capability. Fourth, TMT has a moderating role between the technological capability and the performance of technological innovation. Finally, technological innovations in the small and venture business would be the source of technological capability and technological learning. The implications of this study are as follows. TMT has the very important role for the technological innovation and affect the technology development and the production. Also technology-based companies must gain a competitiveness advantage through technological learning and technological innovations for sustainable growth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.463-468
• /
• 2017

For transdermal drug delivery, needless injection system is composed of laser and microjet injector. Main mechanism of microjet injector is the laser-induced bubble. Nd:YAG and Er:YAG laser are used as a power source. Laser parameters such as pulse duration and wavelength are considered, which are core parameters to control the bubble motion. The Nd:YAG laser, pulse duration is short than bubble life time making cavitation like bubble while in Er:YAG laser, long pulse duration and high absorption in water drive bubble as a boiling bubble. Detailed motion of bubble and microjet is captured by the high speed camera. So it is observed that microjet characteristics are determined by the bubble behavior. The performance of drug delivery system is evaluated by fluorescent staining of guinea pig skin.