• 제목/요약/키워드: Absorption edge

검색결과 268건 처리시간 0.026초

광흡수 소자를 이용한 광온도 센서 시스템의 구현 (Implementation of fiber-optic temperature sensor system base on optical absorption device)

  • 김영수;김요희
    • 전자공학회논문지A
    • /
    • 제32A권9호
    • /
    • pp.128-134
    • /
    • 1995
  • A fiber-optic temperature sensor utilizing an optical absorption device (InP) was fabricated. The spectrum of transmitted light through an InP device was obtained at the three temperatures(249 K, 369 K). A stabilized LED(light emmiting diode) driver, photoreceiver, and signal proocessing electronics were designed. An intensity referencing technique was adopted in order to minimize the fluctuation of output signal due to external pertubation of the transmitting optical fiber. The optical absorption edge of the InP device moves to longer wavelength at a rate of 0.42 nm / K, and energy gap of InP is 1.35 eV at room temperature. From these results, it is concluded that the InP device has temperature dynamic range of 300 K with LED of center wavelength of 940nm and spectral width of 50nm. The designed fiber-optic temperature sensor system showed good linearity within the temperature range from -30$^{\circ}C$ to + 150$^{\circ}C$.

  • PDF

Filament winding 공법 GFRP 원형튜브의 에너지 흡수특성에 관한 연구 (A Study on the energy absorption characteristics of GFRP circular tubes fabricated by the filament winding method)

  • 김거영;구정서
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.2059-2065
    • /
    • 2008
  • In this paper, quasi-static crushing tests of composite circular tubes under axial compression load are conducted to investigate the energy absorption characteristics. Circular tubes used for this experiment are glass/epoxy (GFRP) composite tubes, which is fabricated by the filament winding method. One edge of the composite tube is chamfered to reduce the initial peak load and to prevent catastrophic failure during crushing process. Two suggested trigger mechanisms for the composite tubes are investigated. Crushing modes are mainly affected by thickness/diameter ratio, and average crushing loads are mainly affected by their cross-sections. Energy absorption characteristics vary significantly as a function of the tube geometry, trigger mechanism, t/D ratio and the cross-sectional shape.

  • PDF

Self-Assembled and Alternative Porphyrin-Phthalocyanine Array

  • Kwag, Gwang-Hoon;Park, Eun-Joo;Kim, Sung-Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권2호
    • /
    • pp.298-300
    • /
    • 2004
  • An alternative molecular porphyrin-phthalocyanine aggregate was prepared and characterized with UV-visible and X-ray absorption spectroscopies. UV-visible experiments evidence 1-dimensional porphyrin-phthalo-cyanine array formed by mixing $SnTPPCl_2 ({\lambda}_{max}=429,\;{\varepsilon}=2.4{\times10^ 5 /M{\cdot}cm)\;and\;NiPc(OBu)_8({\lambda}_{max}=744 nm,\;{\varepsilon}= 2.0{\times}10^ 5 /M{\cdot}cm)$ in solution. In the UV-visible spectrum of the porphyrin-phthalocyanine array, $(SnPNiPc)_n$, a new Q-band appeared at 844 nm with decrease of the Q-band peak of $NiPc(OBu)_8$ at 744 nm. The red-shift of Q-band evidences an alternative porphyrin-phthalocyanine array formed in solution through metal-halide interaction rather than ${\pi}-{\pi}$ facial interaction, in which nickel of $NiPc(OBu)_8$ coordinates with chloride of $SnTPPCl_2$ through self assembly. Ni K-edge XANES (X-ray absorption near edge structure) spectra also support the axial ligation of nickel to chloride. The square planar structure of $NiPc(OBu)_8$ turns to an octahedral structure in (SnPNiPcSnP) by axial ligation. A higher energy-shift (0.2 eV) of the preedge peak of (SnPNiPcSnP) indicaties partial oxidation of nickel by charge transfer from NiPc$(OBu)_8$ to SnTPPCl$_2$.

저 에너지 이온빔 조사에 따른 비정질 $Se_{75}Ge_{25}$ 박막의 광학적 특성 (The optical characteristics of amorphous $Se_{75}Ge_{25}$ thin film by the low-energy lon beam exposure)

  • 이현용;오연한;정홍배
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권2호
    • /
    • pp.100-106
    • /
    • 1994
  • A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

  • PDF

Room Temperature Ferromagnetism on Co and Fe Doped Multi-wall Carbon Nano-tube

  • Chae, K.H.;Gautam, S.;Yu, B.Y.;Song, J.H.;Augustine, S.;Kang, J.K.;Asokan, K.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.171-171
    • /
    • 2011
  • Co and Fe doped multi-wall carbon nano-tubes (MWCNTs) synthesized by microwave plasma enhanced chemical vapor deposition (PECVD) technique are investigated with synchrotron radiations at Pohang Light Source (PAL) and European Synchrotron Radiation Facility (ESRF). Near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K, Co $L_{3,2}$ and Fe $L_{3,2}$-edges, and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$-edges have been carried at 7B1 XAS KIST and 2A MS beamline, respectively, to understand the electronic structure and responsible magnetic interactions at room temperature. X-ray absorption spectroscopy (XAS) at C K-edge shows significant p-bonding and Co and Fe L-edges proves the presence of $Co^{2+}$ and $Fe^{2+}$ in octahedral symmetry. Co and Fe doped MWCNTs show good XMCD spectra at 300K. The effect on the magnetism is also studied through swift heavy ion (SHI) radiations and magnetism is found enhanced and change in the electronic structure in Co-CNTs is investigated.

  • PDF

X-ray Absorption Spectroscopy of a Poly Sodium 4-Styrensulfonate Intercalated Graphite Oxide Electrode

  • 정혜경;박병규;김재영;노한진
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.393-393
    • /
    • 2011
  • We investigated the electronic structures of a poly sodium 4-styrensulfonate intercalated graphite oxide (PSSGO) electrode and a precursor graphite oxide (GO) electrode using X-ray absorption spectroscopy (XAS). Both electrodes were obtained from electrochemical cells. We found that in the C K-edge XAS spectra the ${\pi}^*$ state intensity originating from the sp2 hybridization of graphite decreases predominantly in the graphite oxide and PSSGO electrodes. This indicates that the negatively charged electrolyte ion (BF4-) is absorbed onto the electrodes and is transferred to the ${\pi}^*$ state of the both electrodes. The analysis of their F K-edge spectra reveals that more BF4- ions were found in the PSSGO electrode than in the graphite oxide electrode. This indicates that more electrolyte ions are absorbed in the PSSGO than in the graphite oxide electrode. We argue that this is the main reason why PSSGO cells have higher capacitance, higher energy density, and higher power density when compared to the graphite oxide cells. We also found that BF4- is the primary working ion that can be inserted into the interlayers of the PSSGO electrode.

  • PDF

$Cd_{1-x}Mn_{x}Te$단결정의 Faraday 회전에 관한 연구 (A study of faraday rotation for $Cd_{1-x}Mn_{x}Te$ single crystals)

  • 박효열
    • 한국결정성장학회지
    • /
    • 제10권4호
    • /
    • pp.286-291
    • /
    • 2000
  • 수직 Bridgman법으로 $Cd_{1-x}Mn_{x}Te$ 단결정을 성장시켜 자기장과 파장을 변화시키면서 Faraday회전을 측정하였다. Verdet 상수값은 포톤의 에너지가 높은 쪽으로 이동함에 따라 흡수단 근처에서 최대였고, 조성비 x에 따라 증가하다가 x=0.40 이상에서 감소하였다. $Cd_{1-x}Mn_{x}Te$ 단결정을 Faraday 소자로 이용할 경우, 흡수단 근처에서 Faraday 회전이 가장 크게 일어나는 $Cd_{0.60}Mn_{0.38Te}$ 단결정이 적합하고,광원으로 He-Ne레이저를 사용할 경우에는 $Cd_{0.62}Mn_{0.40}Te$ 단결정이 유용함을 알 수 있었다.

  • PDF

Electronic structure studies of Co-substituted FINEMET alloys by x-ray absorption spectroscopy

  • Chae, K.H.;Gautam, S.;Song, J.H.;Kane, S.N.;Varga, L.K.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.377-377
    • /
    • 2010
  • FINEMET type nanocrystalline materials synthesized by controlled crystallization of amorphous ribbons[1] exhibit excellent soft magnetic properties making them attractive for technological applications. Present work reports the electronic structure studies of Co-substituted FINEMET to get information on the effect of successive Co substitution on local environment around Fe and Co atom by using near edge x-ray absorption fine structure (NEXAFS) and x-ray magnetic circular dichroism (XMCD) measurements. NEXAFS spectroscopy and XMCD measurements have been carried out at Fe $L_{3,2}$ and Co $L_{3,2}$-edges to investigate the chemical states and electronic structure of FINEMET [$(Fe_{100-x}Co_x)_{78}Si_9Nb_3Cu_1Ba$](0$L_{3,2}$-edge reveal that Fe is in 2+ state and in tetrahedral symmetry with other elements. The magnetic properties exhibiting soft magnetic behavior[2] are discussed on the basis of the electronic structure studied through XMCD.

  • PDF

Ce $L_Ⅲ$-edge X-ray Absorption Spectroscopic Studies on the Tetrameric Ce-polyoxyhydroxy Cation Intercalated Aluminosilicate

  • 윤주병;황성호;김동국;강성구;최진호
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권3호
    • /
    • pp.305-309
    • /
    • 2000
  • The cerium ion intercalated aluminosilicate was prepared by ion exchange reaction between $Na^+$ in montmorillonite and $Ce^{+4}$ in aqueous solution. The X-ray absorption near edge structrure(XANES) analyses indicate that the $Ce^{+4}$ ions are partially reduced to the $Ce^{+3}$ ones during the intercalation into layered aluminosilicate due to a charge transfer between host and intercalant. From the EXAFS analysis, two different (Ce-O) bonding pairs could be characterized with the distances and coordination numbers of 2.31 $({\pm}0.02){\AA}$ ${\times}$ 8.2 $({\pm}1.5)$ and 2.66 $({\pm}0.02){\AA}$ ${\times}$ 2.7 $({\pm}1.0)$, respectively, with the oxygen atoms as the first nearest neighbor, and two (Ce-Ce) pairs at 3.78 ${\AA}$ as the second neighbor. It is therefore concluded that the most probable Ce-species stabilized in the interlayer space of aluminosilicate after the intercalation is the tetrameric Ce-polyoxy/hydorxy cations with the mixed valent state of 0.75 $Ce^{+4}$.0.25 $Ce^{+3}$.