• 대한화학회지
• /
• 제60권5호
• /
• pp.317-320
• /
• 2016

Efficient copper removal from water was achieved by using surface modified silica spheres with 3-mercaptopropyltrimethoxysilane (MPTMS) using base catalyst. The surface modification of silica spheres was performed by hydrolysis and condensation reactions of the MPTMS. The characteristic infrared absorption peaks at 2929, 1454, and 1343 cm⁻¹ represent the −CH₂ stretching vibration, asymmetric deformation, and deformation, respectively. The absorption peaks at 2580 and 693 cm⁻¹ corresponding the −SH stretching vibration and the C-S stretching vibration indicate the incorporation of MPTMS to the surface of silica spheres. Field emission scanning electron microscope (FESEM) image of the surface modified silica sphere (SMSS) shows nano-particles of MPTMS on the surface of silica spheres. High concentration of copper solution (1000 ppm) was used to test the copper removal efficiency and uptake capacity. The FESEM image of SMSS treated with the copper solution shows large number of copper lumps on the surface of SMSS. The copper concentration drastically decreased with increasing the amount of SMSS. The residual copper concentrations were analyzed using inductively coupled plasma mass spectrometer. The copper removal efficiency and uptake capacity with 1000 ppm of copper solution were 99.99 % and 125 mg/g, respectively.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.280-288
• /
• 2004

Split-type nylon/polyester microfiber and polyester microfiber fabrics possess drapeability, softness, bulkiness, and smoothness, so that they can be applied in various industrial fields. In particular, these fabrics are able to absorb various organic solvents, and can be used as clean room materials. To investigate the chemical affinity between solvents and the compositional materials of these fabrics, the contact angle of thermally pressed film fabrics was measured with different solvents. The thermally pressed nylon/polyester fabric films showed a chemical attraction to formamide. The sorption properties of the microfiber fabrics were investigated using a real time testing device, and these tests showed that the sorption behavior was more influenced by the structure of the fibrous assembly than by any chemical attraction. The effect of the fabric density, specific weight, and sample structure on the sorption capacity and rate was examined for various organic solvents. The sorption capacity was influenced by the density and the specific weight of the fibrous assembly, and knitted fabric showed a higher sorption capacity than woven fabric. However, the sorption rate was less affected in lower viscosity solvents. On applying Poiseuille's Law, the lower viscosity solvents showed higher initial sorption rates, and more easily penetrated into the fibrous assembly.

• Advances in concrete construction
• /
• 제3권3호
• /
• pp.237-250
• /
• 2015

Beam-column joints are highly vulnerable locations which are to be designed for high ductility in order to take care of unexpected lateral forces such as wind and earthquake. Previous investigations reveal that the addition of steel fibres to concrete improves its ductility significantly. Also, due to presence of slab the strength and ductility of the beam increases considerably and ignoring the effect of slab can lead to underestimation of beam capacity and defiance of strong column weak beam concept. The influence of addition of steel fibres on the strength and behaviour of steel fibre reinforced high performance concrete (SFRHPC) interior beam-column-slab joints was investigated experimentally. The specimens were subjected to reverse cyclic loading. The variable considered was the volume fraction of crimped steel fibres i.e., 0%, 0.5% and 1.0%. The results show that the addition of steel fibres improves the first crack load, strength, ductility, energy absorption capacity and initial stiffness of the beam.

• 무역학회지
• /
• 제47권2호
• /
• pp.47-67
• /
• 2022

This study is to investigate the relationships between R&D collaboration and competitive advantage in Korean international venture firms from the perspective of resource-based theory, organizational learning and network theory. The R&D collaboration is divided into vertical cooperation within the value chain and horizontal cooperation beyond value chain. The first key finding from empirical analysis is that both vertical and horizontal R&D collaborations have significantly positive impacts on technology based competitive advantages. The vertical R&D collaboration has more impacts on competitive advantages than horizontal R&D collaboration. This suggests that R&D collaboration with purchasers and suppliers plays a greater role for venture organizations' competitiveness. Second, the potential knowledge based absorption capacity and mutual goodwill trust also work significantly to reinforce the positive influences of R&D collaboration to the competitive advantage. This implies that mutual trust between partners participating in collaboration and absorption capacity within venture organizations would strengthen the effectiveness of R&D cooperation. This study provides the practical implications that the performance and effectiveness of R&D collaboration may rely on the nature of cooperation partners and internal organization capability.

• 오토저널
• /
• 제13권5호
• /
• pp.65-72
• /
• 1991

This paper presents the results of static crushing test that was conducted to characterize the energy absorption and collapse characteristics of composite box tubes. Fifteen specimens were fabricated with woven fabric prepreg using [0/90] glass/epoxy and were autoclave cured. Quasistatic compression test was performed on them. Collapse mode and energy absorption capacity vary significantly as a function of the thickness and length of a square side of composite box tube.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.17-28
• /
• 2003

The objective of this study is to review and verify whether the functions and effect of roadside trees generally known in theory are actually realized in urban roads and how well they are performed if the function and effect are really realized. The study was conducted with a focus on air purification effect of roadside trees. The m헤r study result is as follows. First, calculation of air purification effect of roadside trees showed that it is minimal. However, 7.4 units of broad-leaved trees is necessary in order to purify $SO_2$ discharged by one passenger car and 1,803.3 trees to purify $NO_2$. Second, regarding pollutant absorption capacity, air pollutant absorption capacity increased as the number of rows planted gets higher (i.e., 2-row plantation absorbs pollutant better than I-row plantation). In particular, "2-row plantation + lower-level shrub + buffer green belt" was as eight times high as "I-row plantation" in absorption capacity. Third, out of 30 roads with over 8 lanes in 15 cities, only 33.3% or a total of ten roads in seven cities had a median strip. Out of these ten roads, nine roads were planted in a double-layer consisting forest trees, shrubs, ground plants (grass). Analysis showed that out of six tree species planted along these roads, about a half of them were weak to air pollution. Also, based on the outcome of this study, charging a "plantation due" when people purchase a new car, improving layout of roadside trees, and reinforcing plantation of air purification tree species when selecting tree species for roadside trees were proposed.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.438-445
• /
• 2007

액체로켓엔진에서 발생하는 고주파 연소 불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여, 선형 음향 해석 및 상온 음향 실험을 통해 감쇠 효과의 적합성을 검증하였다. 단일 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여 오리피스 직경, 길이를 변화시킨 몇 가지 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 다음으로 음향공의 개수에 따른 음향 감쇠 효과를 비교하였다. 주파수 응답함수를 통한 유해주파수 감쇠 성능은 개수 증가에 따라서 우수해졌지만 흡음계수를 통한 최적의 효율 관점에서 볼 때 오히려 과도한 댐핑으로 인한 해당 주파수의 감쇠 효율이 낮아지는 경향이 발생한다. 결론적으로 음향공을 이용한 제어를 위해서는 유해주파수를 감쇠시킬 수 있는 기하학적 형상을 통한 정확한 동조가 필요하다. 또한, 부피의 제약을 고려한 최적의 효율을 발휘할 수 있는 음향공의 형상 설계와 개수의 선택이 절대적으로 필요함을 입증한다.

• 한국축산식품학회지
• /
• 제35권1호
• /
• pp.50-57
• /
• 2015

Fish sarcoplasmic protein (SP) is currently dumped as waste from surimi industry and its recovery by practical method for being the non-meat ingredient in meat industry would be a strategy to utilize effectively the fish resource. This study was aimed to apply pH treatment for fish SP recovery and evaluated its effect on pork myofibrillar protein (MP) gel. The pH values of fish SP were changed to 3 and 12, and neutralized to pH 7 before lyophilizing the precipitated protein after centrifugation. Acid-treated fish SP (AFSP) showed about 4-fold higher recovery yield than that of alkaline-treated SP and water absorption capacity was also about 1.2-fold greater. Because of the high recovery yield and water absorption capacity, AFSP was selected to incorporate into MP with/without microbial transglutaminase (MTG). The effects of AFSP and MTG on the physicochemical and rheological characteristics of MP and MP gel were evaluated. MTG induced an increase shear stress of the MP mixture and increase the breaking force of MP gels. MP gel lightness was decreased by adding AFSP. MP gel with MTG showed higher cooking loss than that without MTG. A reduction of cooking loss was observed when the AFSP was added along with MTG, where the insoluble particles were found. Therefore, AFSP could be contributed as a water holding agent in meat protein gel.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1754-1759
• /
• 2010

대부분의 석조문화재는 실외에 노출되어 있어 외관이 크게 변형되어졌고, 특히 최근의 산업화와 환경오염물질의 영향으로 풍화가 가속화되고 있다. 본 연구에서는 석조문화재의 풍화에 미치는 환경영향을 알아보기 위해 해수와 대기오염물질에 신선한 화강암을 노출 후 물리 화학적 특성을 조사하였고, 석조문화재 보존 방법의 일환으로 화강암에 $TiO_2$ 광촉매를 코팅한 후 코팅이 화강암의 풍화에 미치는 영향도 조사하였다. 인공풍화 실험 후 화강암 표면의 광물질 조성 변화를 확인할 수 있으며, 수분흡수율은 약간 증가하여 해수와 대기오염물질이 화강암의 풍화에 영향을 미치는 것을 알 수 있었다. $TiO_2$ 광촉매를 화강암에 코팅한 경우 $TiO_2$ 광촉매를 코팅하지 않은 경우보다 해수와 대기오염물질에 의한 화강암의 물리적 특성 변화(수분 흡수율 등)가 적어 화강암의 풍화방지에 효과적임을 알 수 있었다.

• 한국농림기상학회지
• /
• 제3권2호
• /
• pp.81-87
• /
• 2001

쓰레기 매립지 침출수의 중금속과 유해성분을 자작 나무와 이태리포플러 묘목이 얼마나 흡수, 제거하는 지를 알아보기 위해서 침출수 원액, 50% 침출수, 25% 침출수 그리고 대조구 등 4개의 처리로 나누어서 관수하였다. 실험이 끝난 후에 뿌리, 줄기, 잎을 분쇄기로 분쇄하고 그 함량을 Inductively Coupled Plasma emission spectrometer(ICP)로 조사하였다. 위에서 살펴본 것과 같이 이태리 포플러와 자작나무 모두 쓰레기 매립지 침출수의 유해 중금속을 흡수할 수 있는 능력이 있어 매립지나 황폐지 같은 지역의 빠른 조림을 위해서 활용이 기대되는 수종임을 알 수 있다. 특히 토양의 알루미늄(AA),크롬(Cr), 철(Fe) 등의 오염이 문제가 되는 지역에 이들 수종을 식재하게 되면 뿌리를 통해서 이들 원소를 흡착, 흡수 할 수 있는 효과를 올릴 수 있다.