• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.238-241
• /
• 2008

In this study, absorption behaviors of absorbents and additives were measured for removing of $H_2S$ and COS from syn-gas in IGCC process, such as MDEA and HMDA. The experimental variables were concentration of absorbents and reaction temperature. From these experiments, the loading ratios of $H_2S$ were decreased with increasing of concentration of absorbents and absorption temperatures. These results will be applied to basic data for designing of $H_2S$ removal process in IGCC.

• 대한의용생체공학회:의공학회지
• /
• 제10권2호
• /
• pp.94-96
• /
• 1989

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.23-27
• /
• 2013

Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.

• Computers and Concrete
• /
• 제2권1호
• /
• pp.19-30
• /
• 2005

We study the kinetics of absorption of water in Portland cement concretes added with 60, 70 and 80% of granulated blast furnace slag (GGBS) cured in water and at open air and preheated at 50 and $100^{\circ}C$. A mathematical model is presented that allows describing the process not only in early ages where the capillary sorption is predominant but also for later and long times where the diffusive processes through the finer and gel pores are considered. The fitting of the model by computerized methods enables us to determine the parameters that characterize the process: i.e., the sorptivity coefficient (S) and diffusion coefficient (D). This allows the description of the process for all times and offers the possibility to know the contributions of both, the diffusive and capillary processes. The results show the influence of the curing regime and the preheating temperature on the behavior of GGBS mortars.

• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.407-414
• /
• 2001

In this study, the absorption kinetics of $CO_2$onto a mixture of AMP (2-amino-2-methyl-1-propanol) MEA (monoethanolamine) water were investigated at 30 and 4$0^{\circ}C$ using a packed absorption tower. Solubility and absorption rate of $CO_2$into alkanolamine solutions and optimal condition of $CO_2$absorption process were investigated. The experimental conditions are as follows; temperature of 30 and 4$0^{\circ}C$, gas flow rate of 3ι/min for the absorption tower, and liquid flow rate of 0.1ι/min. Feed gas was a mixture of 85% $N_2$and 15% $CO_2$. The experimental results showed that AMP had greater solubilities and faster absorption rates than MEA and DEA. In addition, MEA had the fastest initial reaction rate. To improve the properties of AMP which have low initial reaction rate and high cost, AMP was used with MEA. The mixing ratio was also changed in constant total molarity of 1,2,3 and 4. The experimental results can be summarized as follows: (1) in solubility experiment, the addition of MEA in constant total polarity decreased the solubility of $CO_2$in AMP/MEA mixture. (2) from 0 to about 0.3 in mixing ratio, the solubility of $CO_2$in AMP/MEA mixture had little differences compared with the sum of solubility of AMP only and solubility of MEA only . (3) mixing ratio of 0.3 was found to be an optimal point with the fastest $CO_2$absorption rate.

• 한국농공학회논문집
• /
• 제52권3호
• /
• pp.39-45
• /
• 2010

Quantification of carbon absorption and understanding the human induced land use changes (LUC) forms one of the major study with respect to global climatic changes. An attempt study has been made to quantify the carbon absorption by LUC through remote sensing technology. The Landsat imagery four time periods was classified with the hybrid classification method in order to quantify carbon absorption by LUC. Thereafter, for estimating the amount of carbon absorption, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated with the crown width extracted from digital forest cover type map. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the IPCC guideline, was used to convert the stand biomass into the amount of carbon absorption. Total carbon absorption has been modeled by taking areal estimates of LUC of four time periods and carbon factors for land use type and standing biomass. Results of this study, through LUC suggests that over a period of construction, 7.10 % of forest and 9.43 % of barren were converted into urban. In the conversion process, there has been a loss of 6.66 t/ha/y (7.94 %) of carbon absorption from the study area.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2325-2332
• /
• 2012

A series $[C_3Omim]$[X] of imidazolium cation-based ILs, with ether functional group on the alkyl side-chain have been synthesized and structure of the materials were confirmed by various techniques like $^1H$, $^{13}C$ NMR spectroscopy, MS-ESI, FTIR spectroscopy and EA. More specifically, the influence of changing the anion with same cation is carried out. The absorption capacity of $CO_2$ for ILs were evaluated at 30 and $50^{\circ}C$ at ambient pressure (0-1.6 bar). Ether functionalized ILs shows significantly high absorption capacity for $CO_2$. In general, the $CO_2$ absorption capacity of ILs increased with a rise in pressure and decreased when temperature was raised. The obtained results showed that absorption capacity reached about 0.9 mol $CO_2$ per mol of IL at $30^{\circ}C$. The most probable mechanism of interaction of $CO_2$ with ILs were investigated using FTIR spectroscopy, $^{13}C$ NMR spectroscopy and result shows that the absorption of $CO_2$ in ether functionalized ILs is a chemical process. The $CO_2$ absorption results and detailed study indicates the predominance of 1:1 mechanism, where the $CO_2$ reacts with one IL to form a carbamic acid. The $CO_2$ absorption capacity of ILs for different anions follows the trend: $BF_4$ < DCA < $PF_6$ < TfO < $Tf_2N$. Moreover, the as-synthesized ILs is selective, thermally stable, long life operational and can be recycled at a temperature of $70^{\circ}C$ or under vacuum and can be used repeatedly.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.103-108
• /
• 2016

Carbon Capture and Storage technologies are recognized as key solution to meet greenhouse gas emission standards to avoid climate change. Although MEA (monoethanolamine) is an effective amine solvent in $CO_2$ capture process, the application is limited by high energy consumption, i.e., reduction of 10% of efficiency of coal-fired power plants. Therefore the development of new solvent and improvement of $CO_2$ capture process are positively necessary. In this study, improvement of $CO_2$ capture process was investigated and applied to Test Bed for reducing energy consumption. Previously reported technologies were examined and prospective methods were determined by simulation. Among the prospective methods, four applicable methods were selected for applying to 0.1 MW Test Bed, such as change of packing material in absorption column, installing the Intercooling System to absorption column, installing Rich Amine Heater and remodeling of Amines Heat Exchanger. After the improvement construction of 0.1 MW Test Bed, the effects of each suggested method were evaluated by experimental results.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.98-103
• /
• 2019

Optical filters to control light wavelength of displays or cameras are fabricated by multi-layer stacking process of low and high index thin films. The process of multi-layer stacking of thin films has received much attention as an optimal process for effective manufacturing in the optical filter industry. However, multi-layer processing has disadvantages of complicated thin film process, and difficulty of precise control of film morphology and material selection, all of which are critical for transmittance and coloring effect on filters. In this study, the composite $TiO_2$, which can be used to control of UV absorption, coated on nano hollow silica sol, was synthesized as a coating material for optical filters. Furthermore, systematic analysis of the process parameters during the chemical reaction, and of the structural properties of the coating solutions was performed using SEM, TEM, XRD and photo spectrometry. From the structural analysis, we found that the 85 nm nano hollow silica with 2.5 nm $TiO_2$ shell formation was successfully synthesized at proper pH control and titanium butoxide content. Photo luminescence characteristics, excited by UV irradiation, show that stable absorption of 350 nm-light, correlated with a 3.54 eV band gap, existed for the $TiO_2$ shell-nano hollow silica reacted with 8.8 mole titanium butoxide solution. Transmittance observed on substrate of the $TiO_2$ shell-nano hollow silica showed effective absorption of 200-300 nm UV light without deterioration of visible light transparency.

• 한국산림과학회지
• /
• 제5권1호
• /
• pp.16-21
• /
• 1966

This experiment was accomplished to study the effect affecting to the absorption of creosote solutions by treating temperatures 20, 50 and $80^{\circ}C$ when the small test pieces were treated as short timed immersion process. The test speciemens used in this experiment were cut into 180 pieces of $2.5{\times}2.5{\times}5cm$ size from the air dried sapwood of Righda Pine (Pinus rigida M.). They were controlled to about 8 to 9% moisture contents and measured specific gravities. Four creosote solutions of $S_1$(straight creosote), $S_2$(creosote 70% : heavy oil 30%), $S_3$(creosote 50% : heavy oil 50%) and $S_4$(creosote 30% : heavy oil 70%), and three treating temperatures of $T_1$($20^{\circ}C$), $T_2$($50^{\circ}C$) and $T_3$($80^{\circ}C$) were applied by factorial split plot design in the each treatment of 3, 7, 15, 30 and 60 minutes immersion. According to the results this study may be concluded briefly as follows : 1. In this immersion process the absorption effects of creosote mixtures by the increase of temperatures are recognized considerably in the each treating times. However in the straight creosote of treated solutions the effective differences were not shown but most effective differences were shown in the $S_2$ solution. 2. Although the solutional absorptions were raised considerably by temperature increase in every treating times the absorption effects of creosote mixtures were not reached to that of straight creosote because the effects are considerably lowered if the treating solutions were mixed with heavy oil even a small quantities. 3. The relations between the creosote contents of treating solutions and the absorptions in wood are shown as Fig. 1, 2, 3, 4 and 5. In these figures the absorption curves made by higher temperature treatment $T_3$ are on the lower treatments $T_1$ and $T_2$ if the solutions were mixed with heavy oil. 4. This report is a part of the consolidated results announced at the annual meetings of Korean Forestry Association in 1964 and 1965.