• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.934-937
• /
• 2006

This investigation presents a topology formulation to design optimal poroelastic acoustic foams to maximize absorbing ability. For successful formulation, a single set of equations based on Biot's theory is adopted and an appropriate material interpolation strategy is newly developed. Because there was no earlier attempt to solve poroelastic acoustic foam design problems in topology optimization setting, many challenging issues including modeling and interpolation must be addressed. First, the simulation accuracy by a proposed unified model encompassing acoustic air and poroelastic material was checked against analytical and numerical results. Then a material interpolation scheme yielding a distinct acoustic air-poroelastic material distribution was developed. Using the proposed model and interpolation scheme, the topology optimization of a two-dimensional poroelastic acoustic foam for maximizing its absorption coefficient was carried out. Numerical results show that the absorption capacity of an optimized foam layout considerably increases in comparison with a nominal foam layout.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• Composites Research
• /
• 제16권6호
• /
• pp.33-40
• /
• 2003

복합재료의 열화에 의한 미세한 손상을 실제적으로 관찰하기는 쉽지 않다. 복합재료의 열화는 심각한 blistering이 일어나기 전에 chain scission, oxidation 등의 분자적인 상변화 과정을 거쳐 모재 또는 모재와 강화제 사이의 계면에서 미세한 delamination이 발생하고 성장한다. 복합재료의 열화에 의한 초기 열손상은 기계적인 특성에 큰 영향을 주게 된다. 본 연구에서는 복합재료 부품이 열이나 화염에 단기간 노출되었을 경우 및 경화도에 따른 초음파 투과 특성을 분석하였다. 온도와 시간에 따라 열화 시험을 실시하고 초음파 탐상을 통하여 absorption coefficient를 측정한 결과 열화에 의한 미소 균열과 분자 적인 상변화에 의하여 열화도가 높을수록 높은 absorption coefficient값을 보였다 경화온도를 달리하여 경화된 복합재료의 초음파 탐상 결과 경화 온도가 높을수록 absorption coefficient 값은 높아졌으며 material velocity는 낮아지는 경향을 보였다. 이는 높은 온도에서 경화될수록 수분 및 휘발 성분에 의한 void와 같은 결함이 많이 발생하고 분자 구조적인 측면에서 높은 온도에서 경화된 경우 초음파 흡수율이 높은 망상구조가 형성되기 때문이다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.95-95
• /
• 2003

In this study, the influences of organic solvent viscosity on absorption properties of split-type micro fiber fabrics is examined with real time absorption measurement device built by our research group recently. And the absorption behavior of these fabrics is analyzed by material, fineness, construction, weight, thickness, and density of fabrics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.692-693
• /
• 2004

We introduce a new velocity sensor, micro-flown sensor, which was developed by H-E de Bree. The sound absorption coefficients of a fiber material with the conventional pressure microphones and the micro-flown sensors were measured and compared. The experimental results show that both sensors could be well applied to measure the sound absorption coefficient but the pressure sensor was rather stable than micro-flown sensor

• 농약과학회지
• /
• 제18권4호
• /
• pp.342-349
• /
• 2014

미국, EU, 한국의 농작업자위해성평가를 위한 AOEL 설정, 국가별 경구흡수율 적용, 노출량 산출방법을 조사하였다. 농약성분 141종에 대한 경구흡수율을 조사하였으며 경구흡수율을 적용한 농작업자노출허용량(AOEL)과 국내 설정 AOEL을 이용하여 농작업자위해성평가를 실시하였다. 미국과 EU에서는 external dose를 internal dose로 변환하기 위하여 경구흡수율 또는 피부흡수율을 적용하였으나 한국에서는 AOEL 설정 시 경구흡수율을 적용하지 않은 external dose를 사용하였다. 141종의 농약성분 중 50종이 경구흡수율 80% 미만이었으며 경구흡수율을 적용하는 경우 약 36%의 농약성분이 이전 AOEL보다 낮아질 것으로 사료되었다. 50종의 농약성분 중 한국에 등록된 농약 28품목에 대해 EU AOEL을 이용하여 농작업자위해성평가를 실시한 결과, chlorothalonil WG 등 12품목이 독성노출비가 1 이하로 계산되어 위해성이 높은 것으로 나타났다. 또한 50종 중 한국 AOEL이 설정되어 있으며 한국에 등록된 농약 24품목에 대해 한국 AOEL을 이용하여 농작업자위해성평가를 실시한 결과, chlorothalonil WG 등 6품목은 독성노출비가 1 이하로 위해성이 높게 나타났다. 한국 AOEL이 없는 4품목에 대해 EU AOEL을 경구흡수율 100%로 환산한 수치를 이용하여 위해성평가를 실시한 결과, daminozide WP 등 4품목 모두 독성노출비 1 초과로 위해성이 낮게 나타났다. 경구흡수율 적용 및 미적용 EU AOEL과 한국 AOEL을 사용한 농작업자위해성평가를 비교한 결과 oxadiagyl SC 등 6품목을 제외한 22품목에서 동일한 위해성평가 결과가 나타났다. 본 연구 결과, 농작업자 위해성 평가를 실시할 때 경구흡수율을 적용한 AOEL을 이용할 수 있을 것으로 사료되었다. 경구흡수율을 적용한 AOEL 설정 및 이용한 농작업자위해성평가를 수행하였을 때 보다 실제에 가까운 평가방법으로 판단되므로 등록농약의 평가에 적용될 수 있도록 개선이 필요할 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제11권3호
• /
• pp.214-220
• /
• 1998

ZnO varistors are characterized by the features of excellent nonlinearity and surge withstand capability. In this paper, in order to investigate the use of ZnO varistor as surge absorption device in low voltage, metal oxide material($TiO_2$) was selected as control material of grain growth. Samples of ZnO varistors were fabricated with varying the contents, and then the microstructures and V-I characteristics were measured. It was observed by SEM that the mean grain size increased with the increase of the additive. From the measurement of V-I characteristics, it was observed that according to the increase of the quantity of $TiO_2$ as additive, the operating voltage was lowered.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.210-218
• /
• 2011

The structure of kapok fiber was characterized using FTIR and $^{13}C$-NMR spectrometers, elemental analyzer, x-ray diffractometer, SEM and IMT I-Solution ver 7.5. The kapok has a hollow tube shape and is composed of cellulose I with crystallinity of 47.95%. To develop novel oil-sorbent materials necessary to avoid the environmental pollution by spilled oil, the oil absorption capacity of various fibers such as kapok, polypropylene(PP), acryl, bamboo, cotton, rayon and wool fibers is compared in this study. The kapok fiber had the highest oil absorption capacity among the fibers and its water absorption capacity was the least. The kapok fiber selectively absorbed significant amounts of oils (43g/g of fiber for kerosene, 65g/g of fiber for soybean oil), which might be due to higher hydrophobicity of the kapok fiber, suggesting that kapok fiber may have high potential as excellent oil-absorbent materials.

• 통합자연과학논문집
• /
• 제9권4호
• /
• pp.249-254
• /
• 2016

This study evaluated the physical and optical characteristics of hydrophilic ophthalmic polymer with addition of 2-methacryloyloxyethyl phosphorylcholine in the basic hydrogel ophthalmic lens material, and in particular, the utility of 2-methacryloyloxyethyl phosphorylcholine as an ophthalmic contact lens material for ophthalmologic devices was investigated. In this study 2-methacryloyloxyethyl phosphorylcholine were used as additives. For the preparation of hydrogel lens 2-hydroxyethyl methacrylate, methyl methacrylate, acrylic acid and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The physical properties of the produced polymers were measured as followings. The refractive index of 1.433~1.393, water content of 35.95~53.16%, contact angle of $70.6{\sim}51.24^{\circ}$, UVB transmittance of 81.2~82.4%, UV-B transmittance of 81.2~82.4% and visible transmittance of 91.4~92.2% were obtained. Also, in case of protein absorption, the measurement showed that absorbance of Reference and MPC-10 sample was 0.2598 and 0.2250 respectively. Based on the results of this study, ophthalmic lens material containing 2-methacryloyloxyethyl phosphorylcholine is expected to be used usefully as a material for high wettability and inhibitor of protein adsorption for ophthalmic hydrogel lens.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.95-98
• /
• 2007

본 논문은 W-대역에서 유전손실 재료인 $TiO_2$의 전파흡수 특성을 분석하였다. 먼저 전파흡수체 샘플을 손실재료로 $TiO_2$ 와 바인더로 CPE를 사용하여 조성비별 제작하고, 네트워크 아날라이저를 이용하여 측정한 S-parameter로부터 $\ell-2\ell$ 법을 이용하여 재료정수를 계산하였다. 그리고 샘플들의 재료정수와 전파흡수 특성을 분석한 결과 조성비 $TiO_2:CPE=70:30wt.%$에서 우수한 전파흡수 특성을 보임을 확인하였다.