• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.888-893
• /
• 2013

In this paper, we prepared $Cu(In,Ga)Se_2$ thin films by using co-evaporation method, and analyzed the properties of the thin films. During the thin film preparation process, we confirmed $InGaSe_2$ phase was formed at $400^{\circ}C$ in first stage, and also confirmed the thin films showed the vacancy decrease. In second and third stage, we confirmed the density increase of crystalline structure at over $480^{\circ}C$ and the formation of $Cu(In_{0.7}Ga_{0.3})Se_2$ phase. As the result of SEM and XRD analysis of the films which were before and after heat-treated, we confirmed the disappearance of $Cu_2Se_2$ and the formation of $Cu(In_{0.7}Ga_{0.3})Se_2$ single phase after the heat-treatment, We, therefore, confirmed the heat-treatment did not affect the absorbency spectra of the thin films.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.465-470
• /
• 2006

Walnut hull is a by-product from the Walnut tree, used as natural dyestuff from ancient times. This study was done to examine the effects of extractive conditions on the properties of walnut hull extracts for making efficient use of the walnut hull as a natural colorant. Aqueous extracts of walnut hull were prepared at various extractive concentration, temperature and time. Then they were characterized using UV-Vis. Spectrophotometer, FT-IR Spectrometer, Prep Liquid Chromatography, and Energy dispersive X-ray spectrometer. The aqueous extracts have two absorbency peaks of UV-Vis. Spectrum, shoulder type peak in the range of 270-280 nm and broad type band around 420 nm. Intensity of absorbency is increased with increase of extraction concentration and time. However, Boiling temperature extraction method showed the most efficiency of all. Intensity of absorbency is also affected by extraction pH. The Prep LC examined two kinds of isolated colorant with different molecular weight. FT-IR spectra of hull extracts showed an absorption band around $3400cm^{-1}$, the peaks at $1700-1600cm^{-1}$, which are characteristic of aromatic compounds with unsaturated ketone and benzene ring. It showed that the extraction contained some mineral ions, such as K, Ca, Si, Mg.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.81-88
• /
• 1998

The aim of this study is to evaluate several plant extracts with a view to developing UV sunscreen agents. In this study, 150 plant extracts were screened to elucidate their UV spectra using spectrophotometric method. Several plant extracts such as Phellodendron amurense, Morus alba, Rhododendron mucronulatum, Brassica alba have strong absorbency at UVA region (350nm), the suntanning wavelength. And Sophora flavescens, Caesalpinia sapper, Morus alba, Phellodendron amurense, showed absorption plateau value at UVB region (308nm), the erythema action wavelength. These extracts have a good absorbency property as synthetic filter and could be served as substitutes for synthetic UV sunscreen agents.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.116-122
• /
• 2003

The physicochemical properties of fungal chitosan at 95$^{\circ}C$ and 40$^{\circ}C$ acid treatment was as follows respectively. The nitrogen content was 6.71%, 6.91%, the viscosity 2.23cps, 2.21cps, the acetylation 12.0%, 12.7% and the molecular weight 3.12${\times}$10$\^$5/ Dalton, 3.01${\times}$10$\^$5/ Dalton. The absorbency band of reference, FCs-40 and FCs-95 in I.R. spectra was almost in accord with one another. In solid state NMR spectra, methyl group(-CH$_3$) was observed lightly. That means which deacetylation was well occurred. Carbonyl group(C=O) was not observed. C$_1$ to C$\_$6/ in solid state NMR was well observed seperately enough.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.734-738
• /
• 2009

Biodegradable, pH-sensitive, glycol chitosan (GC) hydrogels were prepared using divinyl adipate (DVA) as a crosslinker and acetic acid as a catalyst. DVA has highly reactive double vinyl ester groups and GC contains a high density of hydroxyl groups, with two in every glucosamine unit. The transesterification reaction between vinyl esters and hydroxyl groups produced crosslinked GC hydrogels. The initial crosslinking reaction was monitored by measuring the viscosity of the reaction mixture. When DVA was added to the GC solution and heated to $50^{\circ}C$, the viscosity of the GC solution gradually increased, implying a crosslinking reaction and hydrogel formation. A new peak from the ester group was observed in the FTIR spectra of the GC hydrogels, confirming the crosslinking reaction. The synthesized GC hydrogel showed pH-dependent water absorbency, mainly due to the presence of amine groups ($-NH_2$) at the C-2 position of the glucosamine unit of GC. The water absorbency greatly increased at acidic pH and slightly decreased at alkaline pH. The GC hydrogel gradually degraded in $37^{\circ}C$ water due to hydrolysis of the ester bonds, which were intermolecular crosslinking sites. A red dye, 5-carboxyltetramethyl-rhodamine (CTMR), was entrapped in the GC hydrogels as a model compound. CTMR was released from GC hydrogels in two steps: an initial burst release mainly due to desorption and diffusion, and a second sustained release possibly due to gradual degradation.

• 폴리머
• /
• 제29권4호
• /
• pp.408-412
• /
• 2005

생체재료로 이용하기 위하여 키토산을 기질로 하여 Bembyx mori로부터 추출한 견 피브로인을 블렌드한 필름에 대한 구조와 특성을 X선 회절분석, 열분석, 적외선 분광분석, 전자현미경 관찰, 접촉각 측정, 흡수율 측정으로 조사하였다. $-\~30wt\%$ 피브로인을 포함하는 블렌드 필름은 리튬이온을 포함하는 초산수용액으로 제조되었다. 키토산/피브로인 블렌드 필름은 키토산의 아미노기와 피브로인의 아미드 카보닐기 사이의 수소결합과 같은 분자간 상호작용의 형성에 의해 결정성이 감소되었다. 피브로인의 비율이 증가할수록 키토산의 무수혈 견정상은 소실되었고, 수화형 결정상은 감소되었으며, 퍼브로인의 P형 결정이 형성되어 혼재된 결정구조를 이루었다. 표면 친수성과 수분 흡수성은 피브로인의 비율이 클수록 증가되었으며, 20 $wt\%$, 이상에서 수화젤 상의 필름을 형성하였다. 전자현미경에 의한 블렌드 필름의 표면과 단면은 균일한 상을 나타내었다.