• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.139-140
• /
• 2005

The photocurrent characteristics of CdTe/HgTe/CdTe structured nanoparticles are studied. CdTe/HgTe/CdTe multilayer structured nanoparticles were synthesized by colloidal method. CdTe/HgTe/CdTe multilayer structured nanoparticles were characterized by x-ray diffraction, high-resolution transmission electron microscopy(HRTEM), absorbance and photoluminescence(PL). PL spectrum of CdTe/HgTe/CdTe multilayer structured nanoparticles exhibits a strong exciton bond in the near infrared range. The I-V curves and photoresponses revealed that CdTe/HgTe/CdTe multilayer structured nanoparticles are very prospective materials for the photodetectors.

• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.281-286
• /
• 1999

We carried out this subject to observe photoisomerization using 8A5H and phospholipid(DLPC) containing azobenzene group which has reversible to cis-trans by light irradiation. We investigated the photoisomerization and property of the monolayer film on quartz substrate prepared by the mixture of 8A5H and phospholipid deposited using Langmuir-Blodgett(LB) method. It was found that the absorption spectrum of the 8A5H and phospholipid LB monolayer was induced to photoisomerization by alternate light irradiation. And the absorbance of both the solution of mixtures of 8A5H-phospholipid and LB film was reversibly changed by the acid-base exposure and alternate temperatures.

• 분석과학
• /
• 제8권2호
• /
• pp.117-124
• /
• 1995

지속적인 음주로 인하여 간경변증으로 사망한 human 간에서 ethanol에 의해서 유도되는 것으로 추측되는 hemoprotein들을 확인 및 부분정제하였다. 이 hemoprotein을 정제하기 위하여 Mohamed 등의 방법을 변형하여 단백질을 정제하였고, SDS-PAGE 및 spectrum 양상을 관찰하였다. Triton N-101을 처리한 crude extract를 준비하여 CO gas를 bubbling시킨 후 Octyl-Sepharose CL-4B column chromatography에서 0.06% Lubrol PX로 용출한 다음 0.25% Lubrol PX로 용출하였다(Fig. 2). 0.06% Lubrol PX로 용출한 active fraction을 Hydroxyapatite와 DEAE-Sephadex A-25 column으로 정제하였다(Fig. 3, 4). 정제한 단백질을 12.5% SDS-PAGE를 실시한 결과 분자량은 대조군으로 사용한 흰쥐 간에서 정제한 단백질의 분자량은 55 KDa와 52 KDa였고, 돌연사한 사람의 간에서 정제한 단백질의 분자량은 62 48KDa이며, 간경변증으로 사망한 사람의 간에서 정제한 단백질의 분자량은 54KDa였고(Fig. 5). Cytochrome P450 함량은 20.8nmol/mg protein이며 회수율은 약 4.1%이고, 이들의 최대흡수 파장은 446nm이었다(Fig. 6).

• Environmental Engineering Research
• /
• 제17권4호
• /
• pp.179-184
• /
• 2012

The light absorbance of photocatalysts and reaction kinetics of environmental pollutants at the liquid-solid and gas-solid interfaces differ from each other. Nevertheless, many previous photocatalytic studies have applied the science to aqueopus applications without due consideration of the environment. As such, this work reports the surface and morphological characteristics and photocatalytic activities of carbon-embedded (C-$TiO_2$) photocatalysts for control of gas-phase methyl tertiary-butyl ether (MTBE) under a range of different operational conditions. The C-$TiO_2$ photocatalysts were prepared by oxidizing titanium carbide powders at $350^{\circ}C$. The characteristics of the C-$TiO_2$ photocatalysts, along with pure TiC and the reference pure $TiO_2$, were then determined by X-ray diffraction, scanning emission microscope, diffuse reflectance ultraviolet-visible-near infrared (UV-VIS-NIR), and Fourier transform infrared spectroscopy. The C-$TiO_2$ powders showed a clear shift in the absorbance spectrum towards the visible region, which indicated that the C-$TiO_2$ photocatalyst could be activated effectively by visible-light irradiation. The MTBE decomposition efficiency depended on operational parameters, including the air flow rate (AFR), input concentration (IC), and relative humidity (RH). As the AFRs decreased from 1.5 to 0.1 L/min, the average efficiencies for MTBE increased from 11% to 77%. The average decomposition efficiencies for the ICs of 0.1, 0.5, 1.0, and 2.0 ppm were 77%, 77%, 54%, and 38%, respectively. In addition, the decomposition efficiencies for RHs of 20%, 45%, 70%, and 95% were 92%, 76%, 50%, and 32%, respectively. These findings indicate that the prepared photocatalysts could be effectively applied to control airborne MTBE if their operational conditions were optimized.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1131-1131
• /
• 2001

To develop a nondestructive quality evaluation technique of fruits, a K-mean algorism is applied to near infrared (NIR) spectroscopy of apples. The K-mean algorism is one of neural network partition methods and the goal is to partition the set of objects O into K disjoint clusters, where K is assumed to be known a priori. The algorism introduced by Macqueen draws an initial partition of the objects at random. It then computes the cluster centroids, assigns objects to the closest of them and iterates until a local minimum is obtained. The advantage of using neural network is that the spectra at the wavelengths having absorptions against chemical bonds including C-H and O-H types can be selected directly as input data. In conventional multiple regression approaches, the first wavelength is selected manually around the absorbance wavelengths as showing a high correlation coefficient between the NIR $2^{nd}$ derivative spectrum and Brix value with a single regression. After that, the second and following wavelengths are selected statistically as the calibration equation shows a high correlation. Therefore, the second and following wavelengths are selected not in a NIR spectroscopic way but in a statistical way. In this research, the spectra at the six wavelengths including 900, 904, 914, 990, 1000 and 1016nm are selected as input data for K-mean analysis. 904nm is selected because the wavelength shows the highest correlation coefficients and is regarded as the absorbance wavelength. The others are selected because they show relatively high correlation coefficients and are revealed as the absorbance wavelengths against the chemical structures by B. G. Osborne. The experiment was performed with two phases. In first phase, a reflectance was acquired using fiber optics. The reflectance was calculated by comparing near infrared energy reflected from a Teflon sphere as a standard reference, and the $2^{nd}$ derivative spectra were used for K-mean analysis. Samples are intact 67 apples which are called Fuji and cultivated in Aomori prefecture in Japan. In second phase, the Brix values were measured with a commercially available refractometer in order to estimate the result of K-mean approach. The result shows a partition of the spectral data sets of 67 samples into eight clusters, and the apples are classified into samples having high Brix value and low Brix value. Consequently, the K-mean analysis realized the classification of apples on the basis of the Brix values.

• Journal of Applied Biological Chemistry
• /
• 제55권4호
• /
• pp.217-220
• /
• 2012

오가피(Acanthopanax sessiliflorus Seeman) 열매를 실온에서 70% ethanol (EtOH)로 추출하고 이 추출물을 ethyl acetate (EtOAc) 분획, n-butyl alcohol 분획, $H_2O$ 분획으로 나누었다. EtOAc 분획에 대하여 silica gel, octadecyl silica gel 및 Sephadex LH-20 column chromatography를 반복 실시하여 2종의 화합물을 분리, 정제하였다. NMR, infrared spectroscopy, 및 electron ionization/mass spectrometry 등의 spectrum을 해석하여, 화합물 1과 화합물 2를 각각 3,5-dihydroxycinnamic acid과 protocatechuic acid 로 구조를 결정하였다. 화합물 1은 오가자에서는 처음으로 분리된 화합물이다. 또한 이 화합물에 대한 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)diammonium salt, 1,1-diphenyl-2-picrylhydrazyl 및 oxygen radical absorbance capacity radical 소거능을 이용한 항산화 활성을 측정하였는데, 모두 vitamin C보다 2배 이상 활성이 높은 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.222.1-222.1
• /
• 2015

Recently, graphene quantum dots (GQDs) have attracted great attention due to various properties including cost-effectiveness of synthesis, low toxicity, and high photostability. Nevertheless, the origins of photoluminescence (PL) from GQDs are unclear because of extrinsic states of the impurities, disorder structures, and oxygen-functional groups. Therefore, to utilize GQDs in various applications, their optical properties generated from the extrinsic states should be understood. In this work, we have focused on the effect of oxygen-functional groups in PL of the GQDs. The GQDs with nanoscale and single layer are synthesized by employing graphite nanoparticles (GNPs) with 4 nm. The series of GQDs with different amount of oxygen-functional groups were prepared by the chain of chemical oxidation and reduction process. The fabrication of a series of graphene oxide QDs (GOQDs) with different amounts of oxygen-contents is first reported by a direct oxidation route of GNPs. In addition, for preparing a series of reduced GOQDs (rGOQDs), we employed the conventional chemical reduction to GOQDs solution and controlled the amount of reduction agents. The GOQDs and rGOQDs showed irreversible PL properties even though both routes have similar amount of oxyen-functional groups. In the case of a series of GOQDs, the PL spectrum was clearly redshifted into blue and green-yellowish color. On the other hand, the PL spectrum of rGOQDs did not change significantly. By various optical measurement such as the PL excitation, UV-vis absorbance, and time-resolved PL, we could verify that their PL mechanisms of GOQDs and rGOQDs are closely associated with different atomic structures formed by chemical oxidation and reduction. Our study provides an important insights for understanding the optical properties of GQDs affected by oxygen-functional groups. [1]

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3112-3112
• /
• 2001

Near-Infrared Spectroscopy (NIRS) was investigated aiming at the identification of falsified drugs. The identification is based on comparison of the NIR spectrum of a sample with a typical spectra of an authentic drug using multivariate modelling and classification algorithms (PCA/SIMCA). Two spectrophotometers (Brimrose - Luminar 2000 and 2030), based on acoustic-optical filter (AOTF) technology, sharing the same controlling computer, software (Brimrose - Snap 2.03) and the data acquisition electronics, were employed. The Luminar 2000 scans the range 850 1800 nm and was employed for transmitance/absorbance measurements of liquids with a transflectance optical bundle probe with total optical path of 5 mm and a circular area of 0.5 $\textrm{cm}^2$. Model 2030 scans the rage 1100 2400 nm and was employed for reflectance measurement of solids drugs. 300 spectra, acquired in about 20 s, were averaged for each sample. Chemometric treatment of the spectral data, modelling and classification were performed by using the Unscrambler 7.5 software (CAMO Norway). This package provides the Principal Component Analysis (PCA) and SIMCA algorithms, used for modelling and classification, respectively. Initially, NIRS was evaluated for spectrum acquisition of various drugs, selected in order to accomplish the diversity of physico-chemical characteristics found among commercial products. Parameters which could affect the spectra of a given drug (especially if presented as solid tablets) were investigated and the results showed that the first derivative can minimize spectral changes associated with tablet geometry, physical differences in their faces and position in relation to the probe beam. The effect of ambient humidity and temperature were also investigated. The first factor needs to be controlled for model construction because the ambient humidity can cause spectral alterations that should cause the wrong classification of a real drug if the factor is not considered by the model.

• 한국식품위생안전성학회지
• /
• 제8권3호
• /
• pp.151-155
• /
• 1993

참기름에 이종의 식용유를 혼합하였을 때 이를 판별할 수 있는 방법을 연구하기 위하여, 순수한 참기름을 비롯한 일반적인 식용유 5종의 UV흡수양상을 조사하여 각 식용유의 UV흡수특성을 이용하여 순수한 참기름과 혼합 기름을 구별할 수 있는 근거를 마련하였다. 순수한 참기름의 spectrum은 215, 230 및 290 nm에서 흡수피크를 형성한 반면, 옥수수유, 들기름 및 대두유는 모두 215, 230 및 280 nm에서, 그리고 미강유는 215, 290 및 320 nm에서 흡수피크를 형성하였다. 참기름의 290 nm에서의 흡수피크는 참기름 제조과정인 참깨의 볶는 온도와 시간이 증가할수록 그 흡광도가 증가하는 경향이 있었으며, 일반적인 조건으로 추정되는 $200^{\circ}C$, 60분간 볶은 후 제조한 참기름은 대략 0.7 정도의 흡광도를 나타내었다. 참기름에 미강유를 혼합한 기름에서는 320 nm에서 미강유의 존재를 확인할 수 있는 흡수피크가 나타나고, 참기름에 옥수수유, 들기름 또는 대두유를 각각 혼합한 기름들은 290 nm에서의 흡광도가 순수한 참기름의 흡광도에 비하여 적었으며, 이종기름의 혼합율이 높을수록 비례적인 감소를 나타내었다.

• 한국환경과학회지
• /
• 제18권11호
• /
• pp.1215-1224
• /
• 2009

This study evaluated the applicability of visible-light-driven N- and S-doped titanium dioxide($TiO_2$) for the control of low-level dimethyl sulfide(DMS) and dimethyl disulfide(DMDS). In addition, a photocatalytic unit(PU)-adsorption hybrid was evaluated in order to examine the removal of DMS and DMDS which exited the PU and a gaseous photocatalytic byproduct($SO_2$) which was generated during the photocatalytic processes. Fourier-Tranform-Infrared(FTIR) spectrum exhibited different surface characteristics among the three-types of catalysts. For the N- and S-doped $TiO_2$ powders, a shift of the absorbance spectrum towards the visible-light region was observed. The absorption edge for both the N- and S-doped $TiO_2$ was shifted to $\lambda$ 720 nm. The N-doped $TiO_2$ was superior to the S-doped $TiO_2$ in regards to DMS degradation. Under low input concentration(IC) conditions(0.039 and 0.027 ppm for DMS and DMDS, respectively), the N-doped $TiO_2$ revealed a high DMS removal efficiency(above 95%), but a gradual decreasing removal efficiency under high IC conditions(7.8 and 5.4 ppm for DMS and DMDS, respectively). Although the hybrid system exhibited a superior characteristic to PU alone regarding the removal efficiencies of both DMS and DMDS, this capability decreased during the course of a photocatalytic process under the high IC conditions. The present study identified the generation of sulfate ion on the catalyst surface and sulfur dioxide(maximum concentrations of 0.0019 and 0.0074 ppm for the photocatalytic processes of DMS and DMDS, respectively) in effluent gas of PU. However, this generation of $TiO_2$ would be an insignificant addition to indoor air quality levels.