• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.863-871
• /
• 2007

Spectroscopic characteristics of river water from four major watersheds in the Ulsan area were measured to examine their potential for estimating water quality parameters. The total 176 river samples were collected from 44 sites of small streams within the watersheds during the year 2006. Spectroscopic characteristics investigated included protein-like fluorescence (FLF) intensity, fulvic-like fluorescence (FLF) intensity, terrestrial humic-like fluorescence (TLF) intensity, UV absorbance at 254 nm, and UV absorbance difference at 220 nm and 254 nm. Protein-like fluorescence intensity showed linear relationships with biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorous (TP) concentrations of the samples with the correlation of 0.784, 0.779, and 0.733, respectively. Due to the UV absorption characteristics of nitrate at 220 nm, UV absorbance difference at 220 nm and 254 nm was selected to represent total nitrogen (TN) concentration. Exclusion of some samples with PLF intensity higher than 5.0 improved the correlation between the UV absorbance difference and TN as demonstrated by the increase of the correlation coefficient from 0.392 to 0.784. Instead, for the samples with PLF intensity lower than 5.0, the highest correlation of TN was achieved with UV absorbance at 254 nm. The results suggest that PLF intensity could be used as the estimation index for BOD, COD, and TP concentration of river water, and as the primary screening index for the prediction of TN using UV absorbance difference. Some BOD-based water quality levels among the river water were statistically discriminated by the PLF intensity. Low p-values were obtained from the t-tests on the samples with the first level and the second level (p=0.0003) and the samples with the second and the third levels (p=0.0413). Our combined results demonstrated that the selected spectroscopic characteristics of river water could be utilized as a tool for on-site real-time monitoring and/or the primary estimation of water quality.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.109-121
• /
• 1991

For the analysis of mercury in blood and urine, many literatures have been reffered and many kinds of reducing agents for mercury reduction and many acids for pretreatmr are known to be varied. $So HNO_{3}$ and $H_{2}SO_{4}$ among acids and $SnCl_{2}$ and $NaBH_{4}$ as a reducing agent being chosen for the establishment of more efficient and less erroneous analysis, and comparing the absorbance by using vapor generator, the results are followings. 1. The difference of absorbance from concentration of $HNO_{3}$ and $H_{2} SO_{4}$ was not nearly found when mercury reduced by $NaBH_{4}$ after pretreatment. But for more precise analysis, conc acid treatment need to be used. 2. Higher absorbance was shown by using conto acid treatment (P<0.005) when mercury reduced by $NaBH_{4}$ after treating acid primer. And sample which has 99.5% reliability in T-test, treated by conc $H_{2}SO_{4}$(P<0.005) was shown higher absorbance than treat by CORC $HNO_{3}$. 3. The difference of absorbance was not in the slightest in higher 0.1 w/v% $NaBH_{4}$ proved by uruskal-wallis H-Test 4. Some difference of absorbance in $SnCl_{2}$(P<0.005) having 99.5% reliability was found but there was no difference in these 20 w/v% , 25 w/v% and 30 w/v% SnCl$_{2}$ by the experiment of T-test. 5. According to these test results, organic materials were much affect the absorballce when reducing mercury by using $SnCl_{2}$ rather than by $NaBH_{4}$. For bio sample which is contained various organic substances, reduclng agent $NaBH_{4}$ is a lot more efficient to reduce the error then $SnCl_{2}$. 6. analytic method for this study is as following. 7. As the recovery test was done by this, the rate of recovery was shown form 94% to 100.7% .

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.38-45
• /
• 1999

Natural red colorants were extracted from Phytolacca americana Linne by using 50% ethanol solution at room temperature for 12 hours. The colorant components were partially purified as yellow and deep red colorants by thin layer chromatography. Natural red colorants were consisted of major water-soluble red colorant, having maximum absorbance at 538nm and alcohol-soluble yellow colorant, having maximum absorbance at 664nm. Concentration of red colorants were calibrated by the equation of dye(mg/ml) $A_{538nm}\times{1.284}$. Red colorants were changed to yellow at extreme alkali pH and repaired 55% color intensity by neutralization of pH and stabled below $55^\circ{C}$. Dyeability of red colorants against wool fabrics was mainly operated by red pigment having 538nm absorbance without big color differences. Below $55^\circ{C}$, color differences $(\Delta{E}^*_{ab})$ were not changed in spite of big difference of chroma$(c^*)$, having higher scores at higher temperature. The effect of mordants were not drastically changed parameters of color difference without copper ion. Citric acid was big changes of color difference$(\Delta{E}^*_{ab})$ in spite of similar chroma$(c^*)$ values. From these experimental results, red colorants from Phytolacca americana Linne is available for wool fabric dyeing.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.165-172
• /
• 2012

The stability of yellow and red dyes prepared from safflower (Carthamus tinctorius L.) in aqueous solution and in solid state was investigated. External factors such as light irradiation and temperature on the stability were examined during storage. Changes in absorbance of dye solutions and the color changes of fabrics dyed after long time storage were measured. Also, color reproducibility during storage was investigated by dyeing test on various fabrics. Red colorant in aqueous solution was very unstable to light, resulting that about 40% of absorbance were lost in 12hrs. The absorbance of yellow dye solutions was not decreased within 84hrs. In aqueous medium, yellow dye was much more stable than carthamin. Both dyes are relatively stable for long storage when they are stored in solid state compared to when in aqueous solution. Color changes are marginal in both dyes.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.3
• /
• pp.178-182
• /
• 2000

We have investgated UV-Vis absorbance to observe the photoisomerization using the mixture solutions in chloroform and LB monolayers mixed with DLPE and 8A5H containing azobenzene which showed reversible cis-trans photoisomerization irradiated by alternate lights. We have found that the absorbance spectrums of the mixture solutions and LB monolayers were reversibly induced to cis-trans photoisomerization irradiated by alternate lights. In addition, the absorbance of both solution and LB monolayer mixed with 8A5H and DLPE were reversibly by alternate temperatures. As a results, the 1:1(by volume) mixture ratio of 8A5H and DLPE was more flexible and reversible cis-trans photoisomerization than the others.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.43-50
• /
• 1990

The purpose of this paper is to investigate the dyes solubility of dry cleaning solvents among the current domestic products. The dyes were experimented in following way; 1) The flow rate of dyes by paper chromatography method. 2) The color difference & the absorbance of solvents between the dyed fabrics before and after dry cleaning. From the experiment, following results were obtained. 1. In paper chromatography methods, the flow rate of dyes in the disperse dyes was bigger while flow was not shown in the direct dyes & acid dyes. 2. The more the number of times on dry cleaning in dyed fabrics was, the higher the absorbance of solvents was shown. The results were showed following order, PerchloroethyleneHydrocarbon> Fluorocabon. 3. The color difference between before & after dry cleaning on dyed fabrics showed bigger in disperse dyes.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.121-132
• /
• 1996

This study showed the proper pigment extract in the Phe. Dyeing which is the basic dye of the natural plants dyeing,. Also it compared and examined the K/S the promotion of the color fastness and the effect of color difference change were attended by mordants and method of mordanting. 1. The most absorbance of Phellodendron. sol-ution is 330nm berberine is 430nm. 2. The best and proper temperature to extrat Phe,. was 80 and dyeing solution for 24 hours. 3. The pH effect was stable in the absorbances and color differences change. 4. Mordanted group increased the absorbances compared to non-mordanted sample. In case depth the most absorbance of Al. Sn. K. Cu and C. A solution were in 3% Fe and Cr were in 5%. In the color difference change they became dark reduced greenish and increased yellowish when their absorbances were in 3% 5. K./S was recoginzed by tainnin and fe, K/S was more increased pre-mordants than post-mordants. 6. Fe is the unchangable mordant in the color difference change and pre-mordants is more stable than post-mordants in the difference color. 7. Generally light C. F indicated more than grade 2 and light C. F, was much improved in post-mordanted by alumium potassium potass-ium dichromate. Washing C.F was improved in mordanted by tainnin and ferrous suulfate mordanted group was better than non-mordanted sample. Perspir-ation C,F was more stable in acid than alkali. Dry cleaning C.F indicated more than grade. 4.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.295-303
• /
• 2014

Purpose: This study aims to observe bleaching resulted from multipurpose contact lens solutions used to manage lenses with the subjects of colored contact lenses being distributed in Korea. Methods: The lenses have been worn for six months, and their refraction is 0.00D. Three types of colored contact lenses of which margin has been colored with a different manufacturing method have been adopted (type 1: pigment application method, type 2: chemical bonding process, type 3: sandwich method), and multipurpose solutions used were two types containing different components. Each of the colored contact lenses was stored in the multipurpose solutions for 20 days and went through vortexing for 15 seconds per day. Their fluorescence absorbance, surface roughness, brightness index, and color coordinate index were measured before and after the vortexing to see the degree of bleaching. Results: In the two types of multipurpose solutions, every type of the color contact lenses showed no statistically significant difference in their fluorescence absorbance value before and after the vortexing. Regarding surface image, the front surface of the lenses was smooth in every type, and about the back surface, type 3 indicated less protrusion than type 1 and 2. About the difference of color on the lens surface before and after the vortexing, type 3 showed significantly less difference than type 1 and 2; however, all fell into the permissible error. Conclusions: About the bleaching of colored contact lenses resulted from multipurpose solutions for soft contact lenses, there was no difference observed in terms of fluorescence absorbance and color. According to the methods of manufacturing dyes, however, there was difference in the protrusion of the posterior surface image.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.292-298
• /
• 2018

In this study, Ascidian shell pigment was extracted, first using a 100.0 % ethanol solvent, proceeding with the dilution of it with DMSO (Dimethyl sulfoxide). The extracted pigment was evaluated to verify the stability. The absorbance of light have been evaluated according to pH levels and using the color-difference meter. As a result, it could be seen that absorbance and chromaticity ${\pm}a$ values were most stable at a pH level of 7.0 By keeping the sample at a pH level of 3.0, it could be observed that the absorbance and the chromaticity ${\pm}a$ values were decreased. Based on this observation, it can be deduced that the discoloration of the pigment can be prevented if kept at a neutral pH level. When antioxidants were added, the absorbance of the pigment increased, and the best effects could be seen in the ${\alpha}-tocopherol$ and glutathione samples.