• Journal of Astronomy and Space Sciences
• /
• 제26권3호
• /
• pp.295-304
• /
• 2009

대마젤란은하 중심부에 위치한 식쌍성 EROS 1010에 대한 CCD 측광관측을 2006년과 2007년에 수행하여 BV 광도곡선을 완성하였다. BV 광도곡선은 EROS팀과 OGLE팀이 각각 관측한 BR과 I 광도곡선과 함께 Wilson & Devinney 차등보정법으로 분석하여 측광학적인 해를 제시하였다. 한편 대마젤란은하의 거리지수를 $m-M=18.^m3{\sim}18.^m5$ 사이로 가정하고, EROS 1010에 대한 절대량을 구하였다.

• 인지과학
• /
• 제15권3호
• /
• pp.15-24
• /
• 2004

추적 눈 운동 동안에 순간적으로 노출되는 표적의 위치는 표적 주위에 참조자극이 존재하지 않을 때에 일반적으로 눈 운동 방향으로 왜곡되어 지각된다. 본 연구는 안정적이고 정적인 참조자극이 존재하는 경우에 순간적으로 노출되는 표적의 참조자극에 대한 상대적인 위치가 얼마나 정확하게 지각되는지를 검증하였다. 참조자극에 대한 표적의 상대적인 위치가 왜곡되게 지각되었으며 상대적인 위치 지각 왜곡의 양상이 참조자극과 표적의 상대적인 위치에 따라서 체계적으로 변화하였다. 동일한 실험결과가 추적 눈 운동의 방향이 상이하거나 참조자극과 표적의 다양한 물리적인 거리 조건에서도 일관되게 관찰되었다. 본 연구의 실험결과가 위치지각에 관하여 제안된 기존의 이론에 의해 어떻게 설명될 수 있는지를 논의하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1791-1796
• /
• 2005

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named 'entrance' and 'destination', respectively. Usually a simple composition, such as 'a fiducial target at the entrance+a total station (TS)+a target on the machine', is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.

• 천문학회보
• /
• 제39권2호
• /
• pp.51.2-51.2
• /
• 2014

Ultra faint dwarf galaxies (UFDs) are larger but fainter than globular clusters, being the faintest galaxies in the universe. They have been found only in the Local Group. We report the discovery of an UFD in the intracluster field of the Virgo cluster (Virgo UFD1). It is located near the core of Virgo cluster, and far from any massive galaxies. The color magnitude diagram of resolved stars in Virgo UFD1 shows narrow, metal poor red giant branch (RGB), which is very similar to the UFDs in the Local Group. by comparing RGB in this galaxy with 12 Gyr stellar isochrones, we estimate its distance, $d=16.4{\pm}0.4$ Mpc and mean metallicity, $[Fe/H]=-2.4{\pm}0.4$. We derive its integrated photometric properties and structural parameters : V-band absolute magnitude of $MV=-6.3{\pm}0.2$, effective radius of $84{\pm}7pc$, and central surface brightness of ${\mu}V,0=26.49{\pm}0.09$ mag arcsec-2. These properties are similar to these of Local Group UFDs. Virgo UFD1 is the first UFD discovered beyond the Local Group. These results indicate that it may be a fossil remnant of the first galaxies.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.17-23
• /
• 2014

Purpose: The purpose of this study was to analyze and compare the relative accuracy of digitized stone models of lower full arch, using two different scanning system. Methods: Replica stone models(N=20) were produced from lower arch acrylic model. Twenty digital models were made with the white light and blue LED($Medit^{(R)}$, Korea) scanner. Two-dimensional distance between the landmarks were measured on the Delcam $CopyCAD^{(R)}$(Delcam plc, UK). Independent samples t-test was applied for comparison of the groups. All statistical analyses were performed using the SPSS software package(Statistical Package for Social Sciences for Windows, version 12.0). Results: The absolute disagreement between measurements made directly on the two different scanner-based dental digital models was 0.02~0.04mm, and was not statistically significant(P>0.05). Conclusion: The precision of the blue LED optical scanner was comparable with the digitization device, and relative accuracy was similar. However, there still is room for improvement and further standardization of dental CAD technologies.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.543-552
• /
• 1994

음성 인식에서의 dynamic time warp (DTW)은 반복적 계산을 필요로 하며, 이 계산을 수행하기에 합당한 PE cell의 설계는 매우 중요하다. 따라서 이 연구에서는 실시간 어휘 인식을 가능하게 하는 대사전 규모의 대어휘 고립단어인식용 DTW알고리즘을 하드웨어로 구현하기위한 PE(Processing Element)소자의 설계에 주안점을 두었다. 이 DTW용 PE 소자를 크게 세가지의 블록으로 대별된다. 즉, “MIN" block, "ADD" block 그리고 ”ABS" block인데, “MIN"은 축적 최소거리를 계산하기 위한 블록이고, ”ADD"는 이들 최소거리들의 합을 계산하는 블록, 그리고 “ABS"는 이러한 합에 의한 국부거리를 절대값을 구하기 위한 블록이다. 본 연구에서는 이들 세가지 전체 블록회로의 설계 및 검증을 행하였으며, 1.2 m CMOS N-well 설계 규칙에 EK라 전체블록에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.

• 천문학회보
• /
• 제37권1호
• /
• pp.58.2-58.2
• /
• 2012

Wilson and Bappu (1957), for the first time, and other precedent studies (Lutz & Kelker 1975; Pasquini et al. 1988; Dupree & Smith 1995; Wallerwstein et al. 1999; Pace et al. 2003) found a tight correlation (called Wilson-Bappu relationship - WBR) between stellar absolute visual magnitude and the width of the Ca II K line emission feature for late type stars. Here we re-visit WBR to claim that WBR can be an excellent indicator of stellar surface gravity of late type stars as well as a good indicator of distance. We have analyzed 103 high-resolution spectra of G, K and M type stars obtained by UVES and BOES by following the method by Pace et al. (2003) for measuring the widths of Ca II K lines(W). WBR found in our samples is Mv=33.26-17.79logW and the correlation is very tight. In this study, the stellar gravity(log g) has been derived using Kurucz ALAS9 model grid and MOOG code, which can determine $T_{eff}$ and [M/H] too.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.471-481
• /
• 1995

Measurement factors for the dielectric properties of low dielectric loss materials (tan${\dalta}{\le}10^{-4}$) were investigated using the dielectric rod resonator method. It was shown that the relative conductivity (${\sigma}_{r}$) should be controlled within a 5% to obtain the standard deviations of less than 0.07 for permittivity .epsilon.r and 0.06${\times}10^{-4}$ for tan.delta.respectively. Surface resistivity (R$_s$) could be reduced when the surface roughness of parallelled conducting plate was less than 0.07 .mu.m. Measurement error for the permittivity was $\pm$0.02% independent of probe loop size, whereas the error in Q value was reduced with the decrease in probe loop size and also with the increase in the absolute values of Q. Reliable Q values were determined with the probe loop size of less than 4mm. The accurate for the distance between the measuring probe loop and the sample could be obtained when the insertion loss of resonant frequency ranged -15dB - -30dB.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.891-895
• /
• 1996

Performance and efficiency of hybrid (hydraulic-mechanical) pick-up device of deep sea manganese nodules collector are very sensitive to altitude and altitude of pick-up head relative to undulating seafloor. For this reason, motion control of pick-up head relative to the changing deep sea topography and other disturbances is of particular importance in design of pick-up device. The concept of design axiom is applied to a pick-up device of hybrid type. Kinematic analysis conducted in absolute Cartesian coordinates gives position, velocity, and acceleration of the hydraulic cylinders which enable the pick-up head to keep the preset optimal distance from seafloor. Inverse dynamic analysis provides the driving forces of hydraulic cylinders and the reaction forces at each joint. Design sensitivity analysis is performed in order to investigate the effects of possible design variables on the change of the maximum strokes of hydraulic cylinders. The direct differentiation method is used to obtain the design sensitivity coefficients.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.68-74
• /
• 1998

Performance and efficiency of deep seabed collector is a primary factor for feasibility of commercial deep ocean mining. The efficiency of manganese nodules collector depends on vehicle mobility relative to undulating seafloor and is attributed pickup head to keep altitude and elevation of it against seafloor. For this reason, motion control of pickup head relative to the changing deep-sea topography and other disturbances is of particular importance in design of pickup device. The concept of design axiom is applied to a pickup device of hybrid type in order to evaluate the concept design. Kinematic analysis conducted in absolute Cartesian coordinates gives position, velocity, and acceleration of the hydraulic cylinders which enable the pickup head to keep the preset optimal distance from seafloor. Inverse dynamic analysis provides the driving forces of hydraulic cylinders and the reaction forces at each joint. Design sensitivity analysis is performed in order to investigate the effects of possible design variables on the change of the maximum strokes of hydraulic cylinders. The direct differentiation method is used to obtain the design sensitivity coefficients.