• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.211-216
• /
• 2007

Rubber components are widely used in many application such as vibration isolators, damping, ride quality. Rubber spring is used in primary suspension system for railway vehicle. Characteristics and useful life prediction of rubber spring was very important in design procedure to assure the safety and reliability. Non-linear properties of rubber material which are described as strain energy function are important parameter to design and evaluate of rubber spring. These are determined by physical tests which are uniaxial tension, equi-biaxial tension and pure shear test. The computer simulation was executed to predict and evaluate the load capacity and stiffness for rubber spring. In order to investigate the useful life, the acceleration test were carried out. Acceleration test results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the acceleration test, several useful life prediction for rubber spring were proposed.

• Structural Engineering and Mechanics
• /
• v.16 no.2
• /
• pp.141-152
• /
• 2003

Characteristics of solutions of softening plasticity are discussed in this article. The localized and non-localized solutions are obtained for a three-bar truss and their stability is evaluated with the aid of the second-order work. Beyond the bifurcation point, the single stable loading path splits into several post-bifurcation paths and the second-order work exhibits several competing minima. Among the multiple post-bifurcation equilibrium states, the localized solutions correspond to the minimum points of the second-order work, while the non-localized solutions correspond to the saddles and local maximum points. To determine the real post-bifurcation path, it is proposed that the structure should follow the path corresponding to the absolute minimum point of the second-order work. The proposal is further proved equivalent to Bazant's path criterion derived on a thermodynamics basis.

• Natural Product Sciences
• /
• v.21 no.4
• /
• pp.273-277
• /
• 2015

Comprehensive chemical analysis of extracts and fractions of marine actinomycete strains led to the discovery of a new minor secondary metabolite, salternamide E (1), from a saltern-derived halophilic Streptomyces strain. The planar structure of salternamide E (1) was elucidated by a combinational analysis of spectroscopic data including NMR, MS, UV, and IR. The absolute configuration of salternamide E (1) was determined by circular dichroism spectroscopic analysis. Salternamide E displayed weak cytotoxicity against various human carcinoma cell lines.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.122-127
• /
• 2008

Rubber components are widely used in many application such as vibration isolators, damping, ride quality. Rubber spring is used in primary suspension system for railway vehicle. Characteristics and useful life prediction of rubber spring was very important in design procedure to assure the safety and reliability. Non-linear properties of rubber material which are described as strain energy function are important parameter to design and evaluate of rubber spring. These are determined by physical tests which are uniaxial tension, equi-biaxial tension and pure shear test. The computer simulation was executed to predict and evaluate the load capacity and stiffness for rubber spring. In order to investigate the useful life, the acceleration test were carried out. Acceleration test results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the acceleration test, several useful life prediction for rubber spring were proposed.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.104-111
• /
• 2006

The non-linear properties of rubber material which are described as strain energy function are important parameter to design and evaluate of rubber spring. These are determined by material tests which are uni-axial tension and bi-axial tension. The computer simulation using the nonlinear element analysis program executed to predict and evaluate the load capacity and stiffness for chevron spring. In order to investigate the heat-aging effects on the rubber material properties, the acceleration test were carried out. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the compression set test, several useful life prediction for rubber material were proposed.

• Microbiology and Biotechnology Letters
• /
• v.11 no.1
• /
• pp.5-13
• /
• 1983

This experiment was carried out to elucidate the thermotolerant properties of a thermophilic bacterium which isolated from soils of the hot springs area and selected for the $\beta$-galactosidase production. Biochemical and physiological characteristics of this strain were studied, including the investigation on the fatty acid composition for its neutral fats. The results obtained were summarized as follows. 1. This bacterium was identified as a strain belong to the genus Thermus. 2. Optimal temperature and pH for growth of this strain were $65^{\circ}C$ and pH 6.5 respectively, and it was found to be an absolute thermophilic bacterium which could not grow at 37$^{\circ}C$. 3. No growth was obtained in the medium which contained more than 1.0% of sodium chloride. 4. The tolerable concentration of antobiotics were 10$\mu\textrm{g}$ of penicillin G per $m\ell$ of medium and 0.5$\mu\textrm{g}$ of chloramphenicol per $m\ell$ respectively 5. This strain had autotrophilic requirements for calcium-pantothenate and pyridoxine-HCO as an-essential factor and for niacin as a stimulative factor. 6. Fatty acid composition of neutral fats of the strain was palmitic acid. 60.20%; lauric acid, 11.8%; myristic acid, 7.56%, behenic acid, 4.25%; capric acid, 1.77%; stearic acid, 2.13%; arachidic acid, 1.53%; and others unidentified, 10.7%.

• Korean Journal of Social Welfare
• /
• v.60 no.4
• /
• pp.31-53
• /
• 2008

This study intends to verify the poverty characteristics of the rural elderly households so as to provide more specific data for the intervention of social welfare in the improvement of quality of life of the rural elderly. According to my study of the absolute poverty ratio, the poverty gap, the relative poverty ratio, the subjective poverty ratio, the subjective economic level and the life satisfaction level of the rural elderly households in comparison with those of the other groups, the conclusion is as follows: First, the total living cost of the rural elderly households is rather low with the food cost taking about 30% of the total living cost. Second, in terms of the poverty ratio based on socio-demographic characteristics, higher poverty ratio show among women, older people and households of fewer members. Third, 82.2% of the rural elderly households living with an income below the minimum living cost is found around the poverty line. Fourth, the rural elderly households show a comparatively higher poverty ratio than the other groups in the absolute and relative poverty, but lower economic strain than other groups in the subjective poverty ratio and life satisfaction level. In short, the rural elderly households' poverty level is generally high and therefore need ways of active economic supports, while a political approach to the subjective needs of the regional and intergenerational groups is also required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.71-78
• /
• 1992

Zr-4 used for a cladding and an end plug of reactor component has creep deformation under operation at high temperature. Creep is regarded as the time dependent deformation of a material under constant applied stress. Although the major source of the deformation of zirconium component in water-cooled reactors is irradiation creep, the thermal creep may give a rise to significant deformation in reactor component especially at relatively high temperatures and at various constant stresses, and therefore it must be predicted accurately. Stress relaxation is the time dependent change of stress at constant strain and it is a process related intimately to creep. In this paper, the creep behavior and stress relaxation of Zr-4 is examined at the temperature of 50$0^{\circ}C$ that is 40% of the absolute melting temperature of Zr-4 under the stress below yield stress and under the various constant strains. The results obtained are summarized as follows: 1) With an increase of stress, the steady state creep rate increases and the creep rupture time decreases. 2) The steady state creep rate $\varepsilon$(%/s) for the stress $\sigma$sub(c) (kgf/mm super(2)) of Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 are in accord with Norton's model equation($\varepsilon$=K$\sigma$ sub(c) super (n)). The constants of materials computed are as follows: K=3.9881$\times$10 super(-5), n=1.9608 3) The rupture time T sub(r) (hr) decreases linearly with the increase of stress on the log-log scaled graph. The empirical equations computed for Zr-4 are in accord with Bailey's model equation (T sub(r)=K sub(1)$\sigma$sub(c) super(m)). The constants of materials computed are as follows: K sub(1)=1.2875$\times$10 super(16), m=-3.467 4) It seems clear that the strain could be quantitatively dependent on the high temperature creep properties such as creep stress, rupture time, steady state creep rate and total creep rate. It is found that these relationships are linear on the log-log graph. 5) In stress relaxation test, as the critical constant strain that can be allowed to the specimen is larger, stress relaxation becomes more rapid, and as the constant strain is smaller, the stress relaxation becomes slower.

• Coupled systems mechanics
• /
• v.6 no.4
• /
• pp.439-464
• /
• 2017

The hydro-elastic system consisting of a pre-stretched highly elastic plate, compressible Newtonian viscous fluid, and the rigid wall is considered and it is assumed that on the plate a lineal-located time-harmonic force acts. It is required to investigate the dynamic behavior of this system and determine how the problem parameters and especially the pre-straining of the plate acts on this behavior. The elasticity relations of the plate are described through the harmonic potential and linearized (with respect to perturbations caused by external time-harmonic force) form of these relations is used in the present investigation. The plane-strain state in the plate is considered and the motion of that is described within the scope of the three-dimensional linearized equations of elastic waves in elastic bodies with initial stresses. The motion of the fluid is described by the linearized Navier-Stokes equations and it is considered the plane-parallel flow of this fluid. The Fourier transform with respect to the space coordinate is applied for a solution to the corresponding boundary-value problem. Numerical results on the frequency response of the interface normal stress and normal velocity and the influence of the initial stretching of the plate on this response are presented and discussed. In particular, it is established that the initial stretching of the plate can decrease significantly the absolute values of the aforementioned quantities.

• Korean Journal of Microbiology
• /
• v.25 no.1
• /
• pp.57-66
• /
• 1987

Mutants of E. coli which showed increased sensitivity to MMS(methylmethane sulfonate)were isolated by MNNG mutagenesis and characterized by enzymatic assay, survival of simple alkylating agents and host-cell reactivation. E.coli mutant, 5-62, which showed absolute deficiency in 3-methyladenine DNA glycosylase II activity and had low capability of reactivating MMS-treated phage charon 35 was very sensitive to MMS and MNNG. NNS gene which confered resistance to the lethal effects of MMS was cloned in 5-62 strain. 5-62 mutants carrying recombinant plasmid, pMRG 1, which acquired resistance to the lethal effects of MMS had normal sensitivity to MNNG. Resistance to MMS was somewhat increased after they were treated with 0.5.$\mu$g MNNG/ml for 2 hours at $37^{\circ}C$. Although recombinant plasmid, pMRG 1, did not complement alk A mutation in 5-62 and ada mutation in 1-27 mutnat, mutnats transformed with this plasmid showed more capability of reactivating MMS treated phage than mutants.