• 제목/요약/키워드: Abrasives

검색결과 192건 처리시간 0.028초

자성체 피복형 연마입자를 이용한 유리의 평면 래핑의 기초 연구 (Fundamental Research on Polishing of Glass Plates by Coated-type Magnetic Abrasives)

  • 문봉호
    • 한국기계가공학회지
    • /
    • 제10권3호
    • /
    • pp.108-112
    • /
    • 2011
  • In order to obtain excellent flatness and surface roughness of glass substrate disk, uniform distribution of abrasives should be important for uniform polishing. We introduced coated-type magnetic abrasives and magnetic field to a lapping for the improvement of surface roughness and removal rate. Polishing properties with the conventional diamond abrasives and the coated-type magnetic abrasives were compared. As a result, the coated-type magnetic abrasives showed small surface roughness and large removal rate by applying magnetic field. And it also was shown that coated-type magnetic abrasives could save the more amount of polishing liquid under the same removal rate than the conventional diamond abrasives can.

알루미나 연삭입자의 연삭특성에 관한 연구 (A Study on the Grinding Characteristics of Various Alumina Abrasives)

  • 방진영;하상백;이종찬
    • 한국기계가공학회지
    • /
    • 제3권1호
    • /
    • pp.45-51
    • /
    • 2004
  • In this paper, the relationship between the mechanical properties of alumina abrasives and grinding performance was investigated. Micro vickers hardness and fracture strength of all abrasives used in this study were measured. The grinding experiments were earned out with alumina grinding wheels made by various kinds of alumina abrasives including 32A, WA, ART, ALOMAX, and RA. The performance of such grinding wheel for grinding SKD11 was evaluated by specific grinding energy, grinding-ratio, and surface roughness. The grinding wheels composed by the harder abrasives and the lower fracture strength abrasives showed better grinding performance.

  • PDF

CMP 연마입자의 마찰력과 연마율에 관한 영향 (Effect of Abrasive Particles on Frictional Force and Abrasion in Chemical Mechanical Polishing(CMP))

  • 김구연;김형재;박범영;이현섭;박기현;정해도
    • 한국전기전자재료학회논문지
    • /
    • 제17권10호
    • /
    • pp.1049-1055
    • /
    • 2004
  • Chemical Mechanical Polishing (CMP) is referred to as a three body tribological system, because it includes two solids in relative motion and the CMP slurry. On the assumption that the abrasives between the pad and the wafer could be a major reason not only for the friction force but also for material removal during polishing, the friction force generated during CMP process was investigated with the change of abrasive size and concentration of CMP slurry. The threshold point of average coefficient of friction (COF) with increase in abrasives concentration during interlayer dielectric (ILD) CMP was found experimentally and verified mathematically based on contact mechanics. The predictable models, Mode I (wafer is in contact with abrasives and pad) and Mode II (wafer is in contact with abrasives only), were proposed and used to explain the threshold point. The average COF value increased in the low abrasives concentration region which might be explained by Mode I. In contrast the average COF value decreased at high abrasives concentration which might be regarded to as Mode II. The threshold point observed seemed to be due to the transition from Mode I to Mode II. The tendency of threshold point with the variation of abrasive size was studied. The increase of particle radius could cause contact status to reach transition area faster. The correlation between COF and material removal rate was also investigated from the tribological and energetic point of view. Due to the energy loss by vibration of polishing equipment, COF value is not proportional to the material removal rate in this experiment.

염화칼륨 농도에 따른 사파이어 기판 CMP에 관한 연구 (Study on Effect of KCl Concentration on Removal Rate in Chemical Mechanical Polishing of Sapphire)

  • 박철진;김형재;정해도
    • Tribology and Lubricants
    • /
    • 제33권5호
    • /
    • pp.228-233
    • /
    • 2017
  • Chemical Mechanical Polishing of chemically stable sapphire substrates is dominantly affected by the mechanical processing of abrasives, in terms of the material removal rate. In this study, we investigated the effect of electrostatic force between the abrasives and substrate, on the polishing. If potassium chloride (KCl) is added to slurry, water molecules are decomposed into $H^+$ and $OH^-$ ions, and the amount of ions in the slurry changes. The zeta potential of the abrasives decreases with an increase in the amount of $H^+$ ions in the stern layer; consequently, the electrostatic force between the abrasives and substrate decreases. The change in zeta potential of abrasives in the slurry is affected by the slurry pH. In acidic zones, the amount of ions bound to the abrasives increases if the amount of $H^+$ ions is increased by adding KCl. However, in basic zones, there is no change in the corresponding amount. In acidic zones, zeta potential decreases as molar concentration of potassium increases; however, it does not change significantly in basic zones. The removal rate tends to decrease with increase in molar amount of potassium in acidic zones, where zeta potential changes significantly. However, in basic zones, the removal rate does not change with zeta potential. The tendencies of zeta potential and that of the frictional force generated during polishing show strong correlation. Through experiments, it is confirmed that the contact probability of abrasives changes according to the electrostatic force generated between the abrasives and substrate, and variation in removal rate.

습식자기연마(WMAP)에서 입자의 구속과 가공효과에 관한 연구 (Study on Abrasive Adhesion and Polishing Effect in Wet Magnetic Abrasive Polishing)

  • 손출배;진동현;곽재섭
    • 대한기계학회논문집A
    • /
    • 제38권8호
    • /
    • pp.887-892
    • /
    • 2014
  • 일반적인 자기연마가공에서 브러쉬는 연마입자와 자성입자 그리고 약간의 절삭유가 혼합되어 형상을 갖춘다. 그러나 공구가 고속으로 회전하게 되면 대부분의 연마입자는 원심력의 증가로 공구에서부터 떨어져나간다. 이러한 현상은 가공 효율을 저하시키는 결과를 야기한다. 이러한 문제점을 해결할 수 있는 방법 중 하나는 절삭유 대신에 실리콘 겔과 같은 고점성의 물질을 사용하여 입자의 구속을 증가시키는 것이다. 연마입자의 과도한 탈락에 대응하는 또 다른 방법은 습식자기연마(WMAP)이다. 습식자기연마는 절삭유가 공작물의 표면에 충분히 공급된 상태의 자기연마를 의미한다. 본 연구에서는 습식자기연마에서 구속된 연마입자의 구속량과 표면거칠기 향상의 상관관계를 분석하였다. 그 결과 습식자기연마에서 연마입자의 구속률이 낮음에도 불구하고 표면거칠기가 더 많이 향상됨을 알 수 있었다.

에어 버블링을 이용한 침강속도 제어기법 적용 습식워터젯용 연마제 개발 (Development of the Abrasives for Water-jet by Using an Air Bubbling Sedimentation Rate Control Technique)

  • 이대형;김영배;모세웅;김민호;이종무
    • 한국세라믹학회지
    • /
    • 제47권3호
    • /
    • pp.232-236
    • /
    • 2010
  • In recent years abrasive water jet (AWJ) has received significant attention as a technology used in the manufacturing industry for cutting materials. In this paper we report the development of a new preparation method of abrasives for water jet by using an air bubbling sedimentation rate control technique. The SiC abrasives prepared by an air bubbling sedimentation rate control technique using latex resin are found to be superior to the conventional abrasives not only in surface roughness uniformity but also in lifetime. The AWJ test results also show that the former has also better impact-resistance and wear-resistance than the latter.

ER유체를 이용한 미세연마의 원리 (The principle of a electrorheological polishing for a small part)

  • 김욱배;이상조
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.968-971
    • /
    • 2002
  • Two decisive mechanisms of the electrorhological polishing for a small part(for example, a aspherical surface in a micro lens) are explained. Firstly, non-uniform electric field generated in the polishing structure increases a shear stress of ER fluids which is maximized dramatically near the tool, therefore, substrate adjacent to the tool can be removed effectively by mixed abrasives in the ER fluid. Secondly, abrasives in a non-uniform electric field are governed by the dielectrophoretic phenomena. Abrasives move toward the tool because the field gradient is highest near the tool and then abrasives are actively holded in that area. This phenomena is observed and evaluated by the optical measurement.

  • PDF

Effect of Claw Abrasives in Cages on Claw Condition, Feather Cover and Mortality of Laying Hens

  • Glatz, P.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권10호
    • /
    • pp.1465-1471
    • /
    • 2004
  • A trial was conducted to determine the effect of abrasive strips and abrasive paint in layer cages on claw length and claw sharpness, foot condition, feather cover and mortality of hens. During the preparation of the cages for the experiment it was simpler and took less time to apply the pre-prepared paint with a spatula to the egg guard compared to sticking the abrasive strips onto the egg guard. Fitting the strips took longer because it had to be cut from a 25 mm roll, cut into the appropriate lengths, the tape backing removed and then stuck onto the egg guard section. Abrasive paint was more effective as a claw shortener than abrasive strips. The birds using the abrasive paint had the shortest (p<0.05) claw length and lowest (p<0.05) claw sharpness. One of the original reasons for reducing claw length with claw shorteners was to reduce mortality by minimising skin skin abrasions caused by the claws. Surprisingly hen mortality from prolapse and cannibalism was higher (p<0.05) in cages fitted with abrasives. There are no other reports in the literature showing an increase in prolapse and cannibalism from hens using abrasives.

알루미나 세라믹의 초음파가공 특성 연구 (A Study on the Ultrasonic Machining Characteristics of Alumina Ceramics)

  • 강익수;강명창;김창식;김광호;서용위
    • 한국기계가공학회지
    • /
    • 제2권1호
    • /
    • pp.32-38
    • /
    • 2003
  • Engineering ceramics have many unique characteristics both in mechanical and physical properties such as high temperature hardness, high thermal, chemical and electrical resistance. However, its machinability is very poor in conventional machining due to its high hardness and severe tool wear. In the current experimental study alumina($Al_2O_3$) was ultrasonically machined using SiC abrasives under various machining conditions to investigate the material removal rate and surface quality of the machined samples. Under the applied amplitude of 0.02mm, 27kHz frequency, three slurry ratios (abrasives water by weight) of 11, 13 and 15 with different tool shapes and applied pressure levels, the machining was conducted. Using the mesh number of 240 abrasive, slurry ratio of 11 and static pressure of $25kg/cm^2$, maximum material removal rate of $18.97mm^3/mm$ was achieved with mesh number of 600 SiC abrasives and static pressure of $30kg/cm^2$, best surface roughness of $0.76{\mu}m$ Ra was obtained.

  • PDF

CMP시 연마입자에 작용하는 마찰력에 관한 연구 (A study on the friction force caused by abrasives in chemical mechanical polishing)

  • 김구연;김형재;박범영;정영석;정해도
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.1312-1315
    • /
    • 2004
  • Chemical Mechanical Polishing is referred to as a three body tribological system, because it includes two solids in relative motion and the slurry. On the assumption that the abrasives between the pad and the wafer could be a major reason of not only the friction force but also material removal during polishing. The friction force generated by the abrasives was inspected with the change of abrasive size and concentration in this paper. The variation of coefficient of friction with abrasive concentration and size could result from the condition of contact and load balance between wafer and abrasives carried by pad asperity. The simulation was performed in this paper and compared with the result of experiment. The material removal rate also estimated with abrasive concentration and size increasement.

  • PDF