• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.29-33
• /
• 1996

This paper aims to clatify the potimum grinding condition for the electroplated diamond wheel in form grinding of Sr-ferrite. The main conclusions obtained were as follows. (1) The flexural strength and surface roughness of ferrite became the highest at the peripheral wheel speed of 1700m/min. (2) In the case of depth of cut larger than 0.4mm, crack layers is induced in the ground surface, the fracture type of chips exhibits slight ductile mode in the depth of cut smaller than 0.2mm. (3) When the depth of cut exceed 0.6mm, the tool life becomes extermely short due to large chipping and brackage. However, at the depth of cut .geq. 0.05mm, the diamond grain shows abrasive wear. (4) The flexural strength and surface roughness increases in proportion to the feed rate.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.161-166
• /
• 2003

The micro-extruding die is a die for manufacturing of fine-wire by extruding process. The fine-wire made from the micro-extruding can be effectively applied to fields of semiconductor parts and medical parts etc. It is predicted that the demand of fine-wire in industry is more and more increasing. In this study $\phi50\mu m$ micro-drill which is coated with diamond is used for drilling of super micro-hole sizes. For the machining of taper parts of entrance and exit, drill having $\phi50\mu\textrm{mm}$ inclination angle $20^{\circ}$and angle $30^{\circ}$ is used. This is useful for anti tool-breakage and excessive too-wear in drilling process. After micro-drilling, the polishing process by diamond abrasive and polishing wood s carried out for increasing surface roughness.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.114-122
• /
• 2002

Electric conductivities, mechanical properties and friction properties were investigated far graphite-nylon composites impregnated with oil. Specific resistivity of composites containing oil from 2% to 6% were in the range of $10^7 ~10^6 \ohm$ cm, which were applicable for anti-static purpose of composites improved by the impregnation of graphite with 2%. Improvement in the impact strength and friction properties of graphite/nylon composites was achieved by the impregnation of oil. The coefficient of friction of the composites containing graphite from 2% to 4% and oil with 2 - 4% showed much loller than that of virgin nylon. Also the abrasive wear of the oil impregnated graphite composites were decreased about 1/3 - 1/10.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.219-226
• /
• 2002

The mechanical etching technique has recently been developed to a powder blasting technique for various materials, capable of producing micro structures larger than 100$\mu$ m. This paper describes the performance of powder blasting technique in micro-pocketing of stainless steel and the effect of the number of nozzle scanning and the nozzle height on the depth and width of pockets. Experimental results showed that increasing the no. of nozzle scanning and decreasing the nozzle height resulted in the increase of depth and width in pockets. Increase of width results from wear of mask film.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.104-111
• /
• 2004

Ultrasonic machining is a non-thermal, non-chemical, md non-electorial material removal process, and thus results in minimum modifications in mechanical properties of the brittle material during the process. Also, ultrasonic machining is a non-contact process that utilize ultrasonic vibration to impact a brittle material. In this research characteristics of micro-hole machining for brittle materials by ultrasonic machining(USM) process have been investigated. And the effect of ultrasonic vibration on the machining conditions is analyzed when machining fir non-conductive brittle materials using tungsten carbide tools with a view to improve form and machining accuracy.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.133-140
• /
• 2002

Ultrasonic Machining (USM) is widely used in cutting of non-conductive, brittle workpiece materials such as engineering ceramics. However, USM has a limitation in its application to micro machining because problems are occurred in attaching micro tools to the machine and maintaining high precision. Therefore Micro Ultrasonic Machining (MUSM) with WEDM is proposed in this research. The experiments are produced as the change of shaft diameter and abrasive size.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.51-57
• /
• 2007

Creep-feed grinding is an effective technology processes to increase the productivity and efficiency in form grinding. This method has, however, some problems which the progress of abrasive wear around the cutting edge is remarkable, grinding force become intense and burn marks on the ground surface occur frequently. In order to solve this problems, it is proposed in this study to dress the grinding wheel continuously during the grinding process. The purpose of this research is. therefore, that CNC creep-feed grinding machine which has a continuous dressing device developed and some grinding experiments for determination of dressing conditions carried out.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.631-632
• /
• 2006

Cr-C-Ni composites were synthesized in situ from elemental powders of Cr, Ni and C by high energy milling followed by reactive sintering. The milled powders with the grain size in nano-scale were pressed to compacts and sintered. During the following thermal treatment at first the chromium carbide was formed and then the $Cr_3C_2-Ni$ cermets were sintered in one cycle. The interface between the binder phase and the carbide grains of the in situ composite has a good bonding strength as it is not contaminated with oxidation films or other detrimental surface reactions.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.527-534
• /
• 2019

There have been developed a number of methods to assess the abrasivity of rock materials with the increased use of mechanized rock excavation. These methods range from determination of abrasive and hard mineral content using petrographic thin section analysis to weight loss or development of wear flat on a specified cutting tool. The Cerchar abrasivity index (CAI) test has been widely accepted for the assessment of rock abrasiveness. This test has been considered to provide a reliable indication of rock abrasiveness for isotropic rocks. However, a great amount of rocks in nature are anisotropic. Hence, viability assessment of Cerchar abrasivity test for the anisotropic rocks is investigated in this research. The relationship between CAI value and quartz content for the isotropic rocks is well known in literature. However, a correlation between EQ, F-Schimazek value, Rock Abrasivity Index (RAI) and CAI of anisotropic rocks such as phyllite was done first time in literature with this research. The results obtained with this research show F-Schimazek values and RAI values should be considered when determination of the abrasivity of anisotropic rocks instead of just using Cerchar scratch test.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.332-341
• /
• 1998

석판재의 모서리 가공작업은 많은 경우 자동화가 이루어지고 있지만 제품의 형태 가 복잡해지면 여전히 수작업에 의해 연마가 이루어지고 있다. 본 논문을 성형공구의 제작 에 앞서 성형공구의 특성과 장비의 운영요소들의 변화에 따른 연마절삭성능을 파악하기 위 한 기본시험이 수행결과를 나타내는 것이다. 장비의 운영요소는 헤드의 회전속도 및 이송속 도, 가압하중, 급수율, 절삭방향과 이송방향이 포함된다. 실험결과는 연마절삭성능 즉 공구 마모 무게에 대한 판재의 절삭량으로 표시하였고, 각 운영요소들 마다의 적정 운영수준이 제시되어 있다. 또한 연마재 투입략의 변화에 대한 마모시험에서는 마모도는 연마재의 증가 에 따라 증가하지만 어느 이상의 양에서는 오히려 감소하고 있다.