• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.232-241
• /
• 2023

The mechanical properties of the hydrogen valve responsible for supplying and blocking hydrogen gas in a hydrogen fuel cell electric vehicle (FCEV) were researched. Mechanical properties by hydrogen embrittlement were investigated by coating chromium nitride (CrN) and titanium nitride (TiN) on aluminum alloy by arc ion plating method. The coating layer was deposited to a thickness of about 2 ㎛, and a slow strain rate test (SSRT) was conducted after hydrogen embrittlement to determine the hydrogen embrittlement resistance of the CrN and TiN coating layers. The CrN-coated specimen presented little decrease in mechanical properties until 12 hours of hydrogen charging due to its excellent resistance to hydrogen permeation. However, both the CrN and TiN-coated specimens exhibited deterioration in mechanical properties due to the peeling of the coating layer after 24 hours of hydrogen charging. The specimens coated at 350 ℃ presented a significant decrease in ultimate tensile strength due to abnormal grain growth.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.229-229
• /
• 2017

This research study was conducted to analyze the characteristics of different rice cultivars in abnormal temperature conditions (low temperature) for ripening period abnormalities, and to investigate the physiological causes behind the abnormalities. Four Korean high quality japonica-type rice cultivars, Jinbu (JB), Junamjosaeng (JJ), Geumyoung (GY), Hwawang (HW) were used in the experiment. The following day after flowering, they were then moved into two phytotrons under natural daylight with 65% RH but controlled at different temperatures - one at $19/29^{\circ}C$ (night/day) and the other at $13/23^{\circ}C$ as the low - temperature study on ripening. For the cultivars at $13/23^{\circ}C$ (low temperature study), JB and JJ had a ripening rate of 93% which is similar to the ripening rates of cultivars at $19/29^{\circ}C$ at 45 days after heading (DAH). In contrast, GY and HW recorded lower ripening rates of 86% and 57% respectively. However, when the cultivars at $13/23^{\circ}C$ were harvested at 61 DAH (when the accumulated temperature reached $1100^{\circ}C$), the difference in ripening rates compared to the 4 cultivars of $19/29^{\circ}C$ harvested at 45 DAH was not obvious (JB 94%, JJ 97%, GY 97%, HW 88%). Starch content showed little difference among the 4 cultivars at different temperature conditions while amylose content was higher for cultivars at $13/23^{\circ}C$ compared to those at $19/29^{\circ}C$. In addition, the enzyme activities of starch biosynthesis were about 5~10 days slower in cultivars at $13/23^{\circ}C$ compared to cultivars at $19/29^{\circ}C$. The grain-filling rate showed highly significant correlations with the enzyme activities of Sucrose synthase ($R^2=0.70^{***}$), ADP glucose pyrophosphorylase ($R^2=0.63^{***}$), UDP glucose pyrophosphorylase ($R^2=0.36^{***}$), Starch synthase ($R^2=0.51^{***}$), and Starch branching enzyme ($R^2=0.59^{***}$). Among the enzymes, Sucrose synthase activity had the highest correlation coefficient with grain-filling rate. In conclusion, the activity of enzymes such as Sucrose synthase, UDP glucose pyrophosphorylase, ADP glucose pyrophosphorylase, Starch synthase, Starch branching enzyme in starch biosynthesis is proven to be highly related to the grain filling process. Notably, the decrease in the activity of Sucrose synthase and Starch branching enzyme and the late increase in ADP glucose pyrophosphorylase activity at low temperature in the ripening stage are considered to be disadvantageous as they delay ripening and increased amylose content.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.371-384
• /
• 2013

The appearance of abnormal weather caused by climate change have both direct and indirect impact on the society. Especially, agriculture is brought up as a socially important interest having direct impact of climate change in growth and harvest of crops. This study aims to perform vulnerability assessment for the South Korea's two main imported grains, maize and wheat. The production vulnerability assessment of maize and wheat in USA and China to temperature variability, which has a great impact in production, is performed. First, grain cultivation period which affects productivity of main grain production country was selected based on the main cultivation period from several references and previous studies. Then, Intergovernmental Panel on Climate Change AR5 greenhouse gas scenario RCP(representative concentration pathways)8.5 scenarios was used to select the future climate that correspond to the cultivation period of maize and wheat for each producing country. According to the result of production vulnerability analysis using adaptation (temperature changing trend) and sensitivity(temperature variability), the productivity of wheat was higher in USA, while productivity of maize was higher in China. In the future, the result showed that productivity of all two grains will be favorable in USA. The result of production vulnerability assessment through this study can later be used as a preparation data for the coming fluctuation in grain price due to climate change.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.277-282
• /
• 2011

Negative temperature coefficient (NTC) materials have been widely studied for industrial applications, such as sensors and temperature compensation devices. NTC thermistor thick films of $Ni_{1+x}Mn_{2-x}O_{4+{\delta}}$ (x = 0.05, 0, -0.05) were fabricated on a glass substrate using the aerosol deposition method at room temperature. Resistance verse temperature (R-T) characteristics of the as-deposited films showed that the B constant ranged from 3900 to 4200 K between $25^{\circ}C$ and $85^{\circ}C$ without heat treatment. When the film was annealed at $600^{\circ}C$ 1h, the resistivity of the film gradually decreased due to crystallization and grain growth. The resistivity and the activation energy of films annealed at $600^{\circ}C$ for 1 h were 5.203, 5.95, and 4.772 $K{\Omega}{\cdot}cm$ and 351, 326, and 299 meV for $Ni_{0.95}Mn_{2.05}O_{4+{\delta}}$, $NiMn_2O_4$, and $Ni_{1.05}Mn_{1.95}O_{4+{\delta}}$, respectively. The annealing process induced insulating $Mn_2O_3$ in the Ni deficient $Ni_{0.95}Mn_{2.05}O_{4+{\delta}}$ composition resulting in large resistivity and activation energy. Meanwhile, excess Ni in $Ni_{1.05}Mn_{1.95}O_{4+{\delta}}$ suppressed the abnormal grain growth and changed $Mn^{3+}$ to $Mn^{4+}$, giving lower resistivity and activation energy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.127-135
• /
• 1999

Grain-size distribution and accumulation rate of surface sediments on the tidal flats in Hampyong Bay, southwestern coast of Korea, were investigated in a sequential interval of 2 months for the period of 27 months (1994. 10~1996. 12). Seasonal variation of grain-size distribution is prevalent on the Shimock tidal flat in the southern side of the innerbay, rather than the Anarc tidal flat in the northern side around the baymouth. This variation, in particular, more distinctive in the areas around the both high and low tide water levels. The Shimock tidal flat shows typical seasonal variation of sedimentary processes, expected under monsoonal climate. Deposition of tine-grained sediments in summer dominates over erosion in winter, resulting in an annual accumulation rate of 3.7 mm/yr. In contrast, sedimentary processes on the Anarc tidal flat is abnormal that have experienced slight deposition of fine-grained sediments in the winter and severe erosion in the summer time, showing a negative annual accumulation rate of -49.6 mm/yr. Erosional processes in this area is interpreted due mainly to change of strength and direction of tidal currents, caused by the artificial construction of dyke for reclamation in the mid-tidal flat. As a result, It is immoderate to conclude whether sedimentary processes of Hampyong Bay is erosional or depositional at current situation. Further studies on sedimentary budget at the entrance to the bay are needed.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.234-239
• /
• 2002

The spinel was calcined at temperatures in the range of $1000^{\circ}C$ to $1300^{\circ}C$ with $100^{\circ}C$ interval to evaluate the effect of calcination temperature on mechanical properties of spinel-glass dental composites. Although the average particle size of spinel calcined at temperatures from $1000^{\circ}C$ to $1200^{\circ}C$ was within 2.8~3.0 $\mu\textrm{m}$, the spinel calcined at $1300^{\circ}C$ was 4.66 $\mu\textrm{m}$ due to abnormal grain growth. Shrinkage and pore size of the spinel preform decreased and increased, respectively, as calcination temperature increased, indicating that the calcination temperature was significant to the powder compaction and the densification of the composites as a result of particle size and distribution. The optimum strength and the fracture toughness of the composite calcined at $1200^{\circ}C$ were 284$\pm$40 MPa, 2.5$\pm$0.1 MPaㆍ$m^{1/2}$ respectively. Optical experimental results showed that transmittance of the spinel-glass composite in the visible region was twice higher than that of the alumina-glass composite, suggesting that the spinel-glass composites possessed better aesthetic properties for all-ceramic dental crown application.

• The Korean Journal of Nuclear Medicine
• /
• v.9 no.2
• /
• pp.1-11
• /
• 1975

The serum concentrations of thyrotropin (TSH) were measured by means of radioimmunoassay, in 98 cases of normal controls, 51 cases of hyperthyroidism, 80 cases of primary hypothyroidism and 4 cases of secondary hypothyroidism to evaluate the diagnostic significance in various functional states of the thyroid. The obtained data were analyzed in correlation with other thyroid function test values in various phases of the functional thyroid diseases. The results were as follows: 1) The serum TSH concentration in normal control group was $<1.3{\sim}8.0{\mu}U/ml$. 2) The measurement of serum TSH was more significant in diagnostic accuracy compared with that of serum $T_4(75.0{\pm}12.2%)$. Free $T_4$ Index ($64.2{\pm}15.2%$), serum $T_3(41.0{\pm}21.0%)\;or\;T_3$ resin uptake ($41.1{\pm}15.8%$) in evaluation of primary hypothyroidism. 3) In case of overt hypothyroidism, the serum TSH and $T_4$ were both abnormal, compatible with the clinical diagnosis, while in case of preclinical or mild hypothyroidism, the serum $T_4(41.2{\pm}23.8%)\;or\;50.0{\pm}25.0%)$ was much less reliable than serum TSH. 4) In the treatment of primary hypothyroidism with desiccated thyroid, the administration of 1 grain of the hormone per day was sufficient to suppress the serum concentration of TSH to normal range. It showed that the measurement of serum TSH concentration was a significant criteria in evaluating the efficiency of the treatment of hypothyroidism. 5) The measurement of serum TSH concentration is a very significant method in the early detection of hypothyroidism induced during or after the treatment of the hyperthyroidism with antithyroid drugs or radioactive Iodine ($^{131}I$).

• The Korean Journal of Mycology
• /
• v.12 no.2
• /
• pp.65-73
• /
• 1984

Strain IV caused highest reduction of germination and caused abnormal elongation of all part of the plant which finally died. Milyang 23 and Nampungbyeo formed mesocotyl. Samnambyeo and Jinjubyeo did not formed mesocotyl on the soil surface in nursery boxes when they were planted on soil infested with each strain of F. moniliforme. Infected seedlings with mesocotyl recovered after transplanting in the the field. The most frequency of Strain IV was isolated from infected rices and this strain was isolated from all part of rice. When rice seedling infected with Strain IV were transplanted in paddy field, most of rice showed Bakanae symptom. Ear emergence of rice was more delayed when seedlings infected with Strain IV were transplanted than that of healthy plant. Number of panicle per hill and grain yield from rice when infected rice seedling by Strain IV were transplanted were more decreased than that of the healthy plant in paddy field.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.129-133
• /
• 2016

$MnO_2$ was added to the $0.95(Na_{0.5}K_{0.5})NbO_3-0.05CaTiO_3$ (NKN-CT) ceramics in order to promote the densification and improve the poling efficiency by increasing the resistance of the specimens. Densification and abnormal grain growth occurred in the $MnO_2$-added NKN-CT ceramics sintered at $1020^{\circ}C$, indicating that $MnO_2$ assisted the liquid-phase sintering of these materials. $Mn^{3+}$ ions were considered to enter the A-site of the matrix, thereby producing the free electrons, which interacted with the holes resulting from the evaporation of alkali ions. This interaction results in an increase in the resistance of the specimens. The increased resistance improved the poling efficiency and, hence, the dielectric and piezoelectric properties of the NKN-CT ceramics. A few of the $Mn^{3+}$ ions that entered the B-site of the NKN-CT matrix led to a slight increase in the mechanical quality factor.