• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.549-554
• /
• 2008

Nickel Chloride coated protein chip plates were developed by using a spin coating method after $H_2$ plasma treatment. The adsorption ability of histidine tagged protein was investigated at various times of plasma treatment. The properties of the nickel chloride and protein on the surface of the slides were assayed using particle size analysis and the extent of the protein adsorption was determined by using a bio imaging analyzer system. The results show that the ability of protein adsorption decreased as increasing the time of $H_2$ plasma treatment. The mechanism on the ability of protein adsorption at the plate surface is discussed on results and discussions. The results also suggest that the surface stabilization of protein chip plates treated by plasma technology may be applicable in biosensor markets.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.76-79
• /
• 2004

Nickel chloride coated protein chip plate was developed by using a spin coating method. The ability of histidine tagged protein adsorption was investigated at various solvents. The surface of plate has a large aggregated nickel complex with high density in water. However, the surface of plate has a very small size of aggregated nickel complex with low density in isopropanol. The ability of protein adsorption decreased as increasing the size of alkyl chain in various alcohol solvents. The mechanism on the ability of protein adsorption at the plate surface is discussed.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.2
• /
• pp.98-102
• /
• 2007

[ $NiCl_2$ ] and poly-L-lysine coated protein chip plates have been fabricated using a spin coating system. Water has been used as solvent and scratching effects on glass slides and ITO have been investigated. We also observed the surface properties of $NiCl_2$ and poly-L-lysine coated slides by using PSA(Particle size analyzer) and AFM(Atomic force microscope). The AFM results imply that the surface patterns created in the spin coating system determine the protein adsorption. Adsorption of histidine-tagged KRS proteins immobilized on glass slides and ITO was analyzed using a BAS image system. The results suggest that the scratching effect was increased ability of protein adsorption.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.473-477
• /
• 2001

Chitosan has been used as an effective adsorbant for the treatment of wastewater from seafood processing. We investigated the effects of deacetylation degree (DD) and molecular weight (MW) of chitosan on protein adsorption ability and also the optimum conditions of chitosan treatment for protein adsorption in 3 kinds of protein (albumin, hemoglobin and albumin-myoglobin mixture) solutions. The higher deacetylation degree and the lower molecular weight chitosan, the higher adsorption for water soluble proteins was accomplished. The optimum pHs for adsorption of albumin, hemoglobin and albumin-myoglobin mixture (4: 1, w/w) were 4.0, 7.0 and 4.0 respectively and the optimum time was $3\~4$ hrs for all proteins. Sodium chloride in the model system of protein solution was a preventing factor for protein adsorption ability of chitosan (DD=$80\%$, MW=350 kDa).

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.709-717
• /
• 2010

This study investigated the properties and functions of wool and silk dyed with Catechu by examining the effects of dying conditions such as dye concentration, dying temperature, dyeing time, pH level and pre-mordants. These conditions were examined in relation to dye uptake and color changes, washing fastness, light fastness, ultraviolet-cut ability and antimicrobial ability of the dyed fabrics. Catechu showed good affinity to silk fiber. Langmuir adsorption isotherm was obtained, and so it was considered that ionic bondings are formed between Catechu and protein fiber. As the dyeing time and temperature is increased, the dyeability of both silk and wool fabrics also increases. At high temperatures the color of dyed fabrics changes from Y and YR to R. Wool is effective in using Al, Cu, Fe mordant, while silk is effective only in using only Cu mordants. The dyeability was shown to be improved at low pH levels. Additionally, both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causingby repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.378.2-378.2
• /
• 2016

Biosensors currently suffer from severe non-specific adsorption of proteins, which causes false positive errors in detection through overestimation of the affinity value. Overcoming this technical issue motivates our research. Polyethylene glycol (PEG) is well known for its ability to reduce the adsorption of biomolecules; hence, it is widely used in various areas of medicine and other biological fields. Likewise, amine functionalized surfaces are widely used for biochemical analysis, drug delivery, medical diagnostics and high throughput screening such as biochips. As a result, many coating techniques have been introduced, one of which is plasma polymerization - a powerful coating method due to its uniformity, homogeneity, mechanical and chemical stability, and excellent adhesion to any substrate. In our previous works, we successfully fabricated plasmapolymerized PEG (PP-PEG) films [1] and amine functionalized films [2] using the plasma enhanced chemical vapor deposition (PECVD) technique. In this research, an amine functionalized PP-PEG film was fabricated by using the plasma co-polymerization technique with PEG 200 and ethylenediamine (EDA) as co-precursors. A biocompatible amine functionalized film was surface characterized by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The density of the surface amine functional groups was carried out by quantitative analysis using UV-visible spectroscopy. We found through surface plasmon resonance (SPR) analysis that non-specific protein adsorption was drastically reduced on amine functionalized PP-PEG films. Our functionalized PP-PEG films show considerable potential for biotechnological applications such as biosensors.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.196-203
• /
• 2002

A novel process for urokinase purification was studied using p-aminobenzamidine as the ligand and sepharose 4B as the matrix. The adsorption, washing, and elution conditions were optimized by an unusual method. An adsorption buffer containing 2.5 M NaCl and $1\%$ Tween 80 facilitated the adsorption of urokinase on the affinity media and prevented contaminants from binding to the p-aminobenzamidine affinity gel. It was found that $5\%$ Tween 80 removed most of the contaminants from the affinity column. A 0.2 M glycine elution buffer containing 0.5 M NaCl (pH 3.0) was found to have a strong elution ability with a high recovery and purity of urokinase. A crude urokinase material of231 IU/mg protein from human urine was purified to 124,300 IU/mg protein with a purification factor of 538 and yield of $86.7\%$. As a result, a high purity urokinase was obtained with only a single affinity chromatography step. The purification process was successfully scaled-up to a 2-1 chromatography column. The resulting urokinase eluate could be directly lyophilized, thereby complying with Chinese pharmacopoeia (1995 version) standards.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.411.2-411.2
• /
• 2014

The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a building-block material lies in its ability to organize other bio-molecules with nanometer-scale spacing. Here, we report the fabrication of DNA scaffolds with nano-pores (<10 nm size) that formed easily without the use of additives (i.e., avidin, biotin, polyamine, or inorganic materials) into large-scale structures by assembling DNA molecules at near room temperature ($30^{\circ}C$) and low pH (~5.5). Protein immobilization results also confirmed that a fibronectin (FN) proteins/large scale DNA scaffolds/aminopropylytriethoxysilane (APS)/SiO2/Si substrate with high sensitivity formed in a well-defined manner. The DNA scaffolds can be applied for use with DNA-based biochips, biophysics, and cell biology.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.415-421
• /
• 2002

A sulfonated PP-g-styrene ion-exchange hollow fiber membrane was prepared by pre-irradiation method with E-beam followed by sulfonation reaction. Degree of grafting increased with the increase of styrene monomer concentration and showed the maximum value of 128% at 80% of styrene monomer composition. Sulfonation yield increased with the degree of grafting. At 100% degree of grafting, sulfonation yield showed the maximum value of 13.4%. Ion exchange capacity of sulfonated HPP-g-styrene of 3.42 meq/g was attained, resulting in the remarkable increase of adsorption ability BET analysis proved that the surface area of sulfonated HPP-g-styrene was 62.54 $m^2/g$ and the mean pore size was 25 $\AA$. From the BSA adsorption experiments, the adsorption amount of BSA was increased with sulfonation. At 13.4% sulfonation yield the adsorption amount of BSA was maximum as 3.8 mg/g. Sulfonated HPP-g-styrene was synthesized successfully and suitable for the adsorption and separation of BSA.

• Journal of Chest Surgery
• /
• v.40 no.4 s.273
• /
• pp.273-279
• /
• 2007

Background: We evaluate the efficacy of ultra-hydrophilic coated bypass circuits in comparison with uncoated bypass circuits in a porcine cardiopulmonary bypass model. Material and Method: Normothermic cardiopulmonary bypass was peformed in 10 anesthetized pigs via the left atrium and ascending aorta with a centrifugal biopump. Ultra-hydrophilic coated bypass circuits wore used in 5 pigs (the study group) and uncoated bypass circuits were used for the control group. Platelet counts and platelet aggregation tests were peformed. The thrombin-antithrombin(TAT) complex level and total protein level were evaluated. Result: There were no significant changes En the platelet counts and aggregation ability of both groups. The TAT complex levels were not different between the two groups. The total protein level was significantly lower in the control group after cessation of cardiopulmonary bypass. Conclusion: The clinical effects of ultra-hydrophilic coating circuits were not remarkable, in terms of reducing inflammatory reaction and protection of platelet function. However, the effect of protection for blood protein adsorption might be acceptable.