• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2043-2047
• /
• 2010

This study is to solve problems of depletion of RF bandwidth frequency, confusion possibility, security that current wireless communications system have and is to confirm possibility of applying next generation network. To solve problems of current wireless communications system, visible light communications system for power line communications using ATmega16 Microcontroller is was realized and receiver property was analyzed. PLC exclusive chip APLC-485MA, Microcontroller ATmega16, 5pi bulb type LED and high flux LED, visible light receiving sensor LLS08-A1 were used for transmitter and receiver. Performance was analyzed by designed program and an oscilloscope. It was showed average 20% improved receiver rate rather than bulb type LED in the case of high flux LED through voltage change rate on communication distance and LED type of distance between 10 to 50 cm. The blue LED showed the best performance among measured LED types with above 10% of voltage decreasing rate. But As it gradually becomes more distant, the precise date was difficult to obtain due to weak light. To overcome these sort of problems, specific values such as changing conditions and efficiency value relevant to light emitting parts and visible light receiving sensor should be calculated and continuous study and improvements should also be accomplished for the better communications condition.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.221-228
• /
• 2007

Many kinds of microcontrollers such as 8051, PIC16 and Atmega series are used for the automatic control system, home appliances and communication equipments manufacturing. It is very important to understand the basic operational principles of microcontrollers and their design concepts. There are many kinds of educational microcontroller trainers and also they are designed and assembled very complicatedly. For the students or developers, it is very difficult to catch the basic operation schemes and apply the techniques to the control system. And also it requires much cost and time for the various kinds of trainers purchasing. In this paper, standardization of pins layout and peripheral modules for the general microcontroller usage was introduced and tested with 89C2051, 89C51, PIC16F84, PIC16F877, Atmega8535 and Atmega128, etc. As a result of test, it was found that saving the cost and time using this suggested device was possible. And also it was very effective way to understand microcontroller design and programming techniques.

• Journal of the Speleological Society of Korea
• /
• no.81
• /
• pp.7-19
• /
• 2007

본 논문은 초음파센서와 적외선센서를 이용하여 그 신호를 받아 주 모터를 제어한 것으로, 센서를 이용한 선풍기의 풍향 및 풍속을 제어하였다. 풍향제어는 인체감지센서와 ATmega128, DC모터를 사용하였고, 기본적으로 WmAVR과 PonyProg를 사용하여 소스코딩 및 다운로딩을 하였으며, 모터 구동드라이버는 모터제어에 범용으로 쓰이는 L298 칩을 사용하였다. 풍속제어는 초음파센서와 ATmeBa16, DC모터를 사용하여 제작하였고, 풍향제어부와 마찬가지로 WinAVR과 PonyProg 및 L298 칩을 사용하여 소스코딩 및 다운로딩을 하였다. 풍향제어는 물체가 정면에 위치하면 회전을 멈추고, 좌우로 $100^{\circ}$ 반경이내에서 거리 1m내외의 물체를 감지하도록 설계하였다. 풍속제어는 물체까지의 거리를 최소 3cm 최대 3m 이내에서 물체를 감지하여 모터의 속도를 제어할 수 있도록 하였고, 모터속도는 DC모터를 PWM 방식으로 제어하여 속도를 조절하였다.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.11
• /
• pp.621-628
• /
• 2016

Recently, remote controls for home appliances have been produced as many as the number of home appliances per household, and new home appliances are being released, but the number of new remote controls is continuously increasing due to their separate functions. Therefore, it is not inconvenient for first time users to use many remote controls because it is difficult and bulky. In recent years, the practical use of a universal remote control, such as large companies such as SAMSUNG and LG are producing a variety of forms. In this paper, we explain how to transmit and receive data format and infrared remote control through custom code identification method used in IR remote control for each company, and to see the size, characteristics and difference with ordinary remote control through ATmega128 remote control experiment. The ATmega128 can be used to control various home appliances displayed on the LCD. As a result, it can be seen that the number of remote controllers having only each function is reduced, and the integrated remote controller using ATmega128 Can handle household appliances.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.449-454
• /
• 2012

According to the development of the ubiquitous computing technic today, the sensor base system is becoming a big issue in IT fields. This study is to develop a smart weather watching system which allows us to carry out temperature measuring without regard to location and altitude using the sensor devices. this system is composed of the wireless receiver module(PC base) and the wireless measuring module(ATmega2560 base).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1125-1132
• /
• 2012

The researches on driver assistance systems that can prevent an accident have been actively performed due to social issues of traffic accidents with development of vehicle industry in recent. It is required for researchers to develope systems which assist driver's perception and judgment when considering that over 70% of traffic accidents occur by drivers' carelessness and 75% of the total accidents occur at the speed of less 29km per hour. In this paper, we implemented a front and rear vehicle monitoring system that monitors distance from a vehicle to obstacles in real-time at the low-speed or back-ward driving. The proposed system consists of ultrasonic sensors of high angle and wide angle of beam spread, ATmega128, and DSP processor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.50-57
• /
• 2011

In this paper, we proposes a new load-sharing algorithm with a ATmega2560 based digital communication. Proposed algorithm is different from conventional analog method. The high speed communication digital control is performed. To apply the digital communication and real-time control for time-sharing token bus method, we implemented high efficient load-sharing and redundancy. Also this system make down the price by auto ID algorithm and system response is improved by controller's voltage and current integral value sharing. In parallel system prototype, each module have controller and performed load-sharing according to master module integral value. In this paper, we verify the validity of proposed algorithm using PSIM program and prototype.

• Journal of the Speleological Society of Korea
• /
• no.88
• /
• pp.1-7
• /
• 2008

Recently, it is one of very interest technology of Human Computer Interaction(HCI). Nowadays, it is easy to find out that, for example, inside SF movies people has talking to computer. However, there are difference between CPU language and ours. So, we focus on connecting to CPU. For 30 years many scientists experienced in that technology. But it is really difficult. Our project goal is making that CPU could understand human voice. First of all the signal through a voice sensor will move to BCD (binary code). That elevator helps out people who wants to move up and down. This product's point is related with people's safety. Using a PWM for motor control by ATmega16, we choose a DC motor to drive it because of making a regular speed elevator. Furthermore, using a voice identification module the elevator driven by voice sensor could operate well up and down perfectly from 1st to 10th floor by PWM control with ATmega16. And, it will be clearly useful for high-rise vertical shift with voice recognition sensor driven.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.299-305
• /
• 2021

Dissolved oxygen, pH, and temperature are the most important factors for fish farming because they affect fish growth and mass mortality of the fish. Therefore, fish farm workers must always check all pools on the farm, but this is very difficult in reality. That's why we developed a control system for smart fish farms. This system includes a gateway, sensor gatherers, and a PC program using LabVIEW. One sensor gatherer can cover up to four pools. The sensor gatherers are connected to the gateway in the form of a bus. For the gateway, the ATmega2560 is used as the main processor for communication and the STM32F429 is used as a sub-processor for displaying LCD. For the sensor gatherer, ATmega2560 is used as the main processor for communication. MQTT (Message Queuing Telemetry Transport), RS-485, and Zigbee are used as the communication protocols in the control system. The users can control the temperature and the dissolved oxygen using the PC program. The commands are transferred from the PC program to the gateway through the MQTT protocol. When the gateway gets the commands, it transfers the commands to the appropriate sensor gatherer through RS-485 and Zigbee.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1068-1076
• /
• 2019

Most of the electronics we use today have built-in microcontrollers, which are called embedded systems. In such a small environment, responsiveness is very important for the microcontroller. In this paper, the basic input/output control, timer/counter interrupt operation principle, and understanding of the microcontroller are described. Program logic is proposed to improve throughput and latency by controlling characteristics of service routine and program execution order. The hardware simulations in this paper were verified using ATmega128 and PIC16F877A from Atmel and Microchip.