• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.39-41
• /
• 2004

This paper demonstrates the in-house development of the subsystem C&DH in a D-SAT satellite project of Astronautic Technology (M) Sdn. Bhd. (ATSB). D-SAT is a non-imaging satellite. It will carry a dosimeter as the payload for scientific objectives. Since one of the D-SAT project establishment intended objectives is to demonstrate the research and development skill of the ATSB engineers on the satellite system building, most of the subsystems of the D-SAT are developed in-house including the C&DH subsystem. C&DH subsystem plays an important role for managing data handling tasks and general operation of the satellite system. The C&DH development includes the research and study on the hardware and software design, the design of both the hardware and software, the development of the software system, the integration between the software and the hardware system and the implementation of the subsystem into the satellite system. This program allows ATSB to accomplish the engineers with expertise not only in the C&DH subsystem but other subsystems too besides developing knowledge in the management of a space project that covers not only on the technical issues but issues relating to the economic, political and legal issues.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.205-210
• /
• 2002

The HPS(High Porosity Support, 39.3%) and the LPS( Low Porosity Support, 18.7%) were fabricated to investigate the phase transformation and the chance of microstructure with porosity of alumina support. Alumina sol was made using aluminum tri-sec $butoxide(ATSB,\; Al(O-Bu)_3)$, the membrane on porous support with different porosity and the membrane without support were fabricated. The $\theta$-to ${\alpha}-A1_2O_3$ phase transformation in the membranes was investigated using thin film X-ray diffraction (XRD), and the change of microstructure was observed using scanning electron microscopy(SEM). XRD patterns showed that the membrane on LPS and HPS had 10$0^{\circ}C$, 5$0^{\circ}C$ higher $\theta$-to ${\alpha}-A1_2O_3$ transformation temperature compared to the unsupported membrane. A similar effect was also observed in microstructure of the membranes, theoritical temperature difference were 97$^{\circ}C$ and 44$^{\circ}C$ by Crapeyron equation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.953-956
• /
• 2005

The vibroacoustic analysis has been carried out on the RazakSAT qualification model which was developed by SI and ATSB. Statistical energy analysis was used for the analysis and the results was compared with acoustic test results. The equipments of the RazakSAT are simplified as uniformly distributed mass on the panels in the SEA model. According to the comparison of the analysis and test results, SEA is useful estimation of the response in high frequency region and the results are valid when the assumption of equipartition of modal energy is agreed.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.3
• /
• pp.186-194
• /
• 1996

In this study, ceramic film was coated by a sol-gel process for increasing the adhesion strength between the substrate and copper layer. TEOS and ATSB were used as starting solution of metallic alkoxide. As a result, amorphous-like diffraction pattern after heat treatment at $1200^{\circ}C$ was obtained using X-ray diffractometer. The more contants of $Al_2O_3$ gave rise to the futher advanced cracks. A maximum adhesion strength of 250gf was measured under the condition of 30 Wt.% $Al_2O_3$, which is 5 times greater than that of uncoated one of the ceramic film.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.34-34
• /
• 2003

산업의 발달로 인하여 자원재활용의 문제와 환경 오염 방지와 더불어 에너지 절약에 대한 중요성이 확대되면서 분리 고정을 이용한 환경 오염 방지 및 에너지 절약에 대한 관심이 확대되었다. 세라믹 필터는 열악한 환경에서의 적용 그리고 에너지 소모가 적은 장점을 가지고 있다. 여러종류의 재료들 중에서 기공의 제어가 용이한 알루미나 여과막은 보에하미트(${\gamma}$-AlOOH) 분말과 금속 알콕사이드(ATSB, aluminum tri-sec butoxide)를 사용하여 간단하게 제조할 수 있다. 알루미나는 열처리 론도에 따라 $\alpha$-A1$_2$O$_3$ 결정상 뿐만 아니라 몇 가지 준안정한 결정구조를 가진다. 보에마이트(${\gamma}$-AlOOH)는 45$0^{\circ}C$ 근처에서 미세한 기공을 가진 ${\gamma}$-A1$_2$O$_3$로 상전이 되는 것으로 알려져 있고, 120$0^{\circ}C$보다 낮은 온도에서 열처리하게 되면 미세구조의 변화는 일어나지 않고 약간의 입자 성장만을 수반하는 $\delta$-A1$_2$O$_3$ 또는 $\theta$-A1$_2$O$_3$으로 상전이가 일어난다. $\alpha$-A1$_2$O$_3$로의 상전이는 기공 크기의 변화와 vermicular구조를 가지는 비정상적인 입자성장을 수반하게 된다. 여과막은 기공크기와 분포를 제어하는 것이 매우 중요하므로, 상전이와 미세구조의 변화를 이해하는 것은 중요하다.