• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.55-65
• /
• 2004

ATM was recommended by the ITU and ATM Forum as a means of transportation for B-ISDN. At this time, due to the comprehensive mature of ATM protocol, ATM has been adapted as the backbone system for carrying Internet traffi $c^{[1,2,3,4]}$. But major conceptsregarding the ATN protocol will be used on future technology. This paper presents preventive congestion control mechanisms for detecting HTR(Hard-To Reach) code in ATM systems, in particular for an improved HTR call registration method using network signaling information will discussed. In high speed circuit switching system environments, a fast HTR control mechanism is necessary. We present research results for improving HTR call registration and control methods using network signaling information and fuzzy control mechanisms. We concluded that it showed fast congestion avoidance mechanisms with a fewer system load maximized the efficiency of network resources by restricting ineffective machine attempts.

• Journal of Korea Foundry Society
• /
• v.22 no.6
• /
• pp.309-314
• /
• 2002

The effect of mold density and evacuation on surface defect of high chromium cast iron upon EPC process was investigated. Under evacuation of $0.1{\sim}0.3$ atm, surface defects were carbon defect, burn on and misrun. Carbon defect was augmented by increasing mold density from 0.011 g/$cm^3$ to 0.03 g/$cm^3$ under evacuation of $0.1{\sim}0.3$ atm, but carbon defect was decreased by increasing evacuation from 0.1 to 0.3 atm. Burn-on wasn't found under evacuation of 0.1 atm regardless of mold density, but burn-on was augmented by increasing evacuation from 0.2 to 0.3 atm and decreased by reducing mold density. Misrun was only found under 0.1 atm evacuation and 0.011 g/$cm^3$ mold density.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.307-310
• /
• 2000

ATM is the switching and multiplexing technology chosen by the ITU-T for the operation of B-lSDN. Basically, ATM technology is designed to combine the reliability of circuit switching with the efficiency and flexibility of packet switching technology. For servicing QoS in IPOA(IP over ATM) when the larger effort is given, it will be the good method that the original QoS benefits having ATM switching have in ATM layer underlying layer. The IETF has recently proposed Differentiated Services framework for provision of QoS. In this paper we analyse performance of two Diffserv mechanism. Threshold Dropping and Priority Scheduling. Threshold Dropping and Priority Scheduling can be regarded as basic mechanisms from which the other mechanisms have been derived. Hence comparative performance of these two mechanisms in providing required QoS is an important issue. In this Paper we carry out a performance comparison of the TD and PS mechanisms with the aim of providing the same level of packet loss to the preferred flow. Our comparison of the TD and PS allows us to determine resultant packet loss for the non-preferred flows as a function of various parameters of the two mechanisms.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.403-411
• /
• 2016

Objective: This study is concerned with the user interface (UI) design of touch screen based on the reaction time of Automated Teller Machine (ATM) user. Background: Adopting the touch screen technology, the ATM service has recently established a new user interface different from the existing button-type interface. Method: Experiments were conducted by simulating ATM touch screen layouts, and layouts were focused on location of menu buttons (left and right, top and bottom), number of menu buttons (8 and 12 buttons). Results: The results show that there are significant differences in correction ratio and reaction time by user groups, types of menu location, and the number of buttons. Conclusion and Applications: The results of this study can be used to provide baseline information for the interface design of ATM touch screen and the age differences in reaction time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.391-400
• /
• 1994

Recently, the development of ATM switch, a backbone system of BISDN, is receiving worldwide study. Because the development of large communication equipments like a switching system need a lot of time and cost, the performance evaluation by menas of simulation is needed for the higher efficiency of development before actual implementation. So, a general and objective input environment is necessary for proper simulation. The main purpose of this paper is to offer a traffic generator which can provide such input environment as a file for computer simulation of ATM switch. To offer diverse input environment of ATM switch, we select parameters, and implement ATM traffic generator with software technology. Basides, a program to verify the propriety of ATM traffic generator in also proposed. It is expected that the proposed ATM traffic generator will offer diverse input environment for computer simulation to evaluate new ATM switching system, not influenced by any system structure.

• Journal of Internet Computing and Services
• /
• v.1 no.2
• /
• pp.1-10
• /
• 2000

ATM network technology is generally used for the solution of integrating multimedia service in high-speed Internet. In Internet protocol based on ATM services, If single cell is lost in ATM layer, the entire TCP packet will be lost. Therefore, TCP performance will be degraded. In order to reduce cell loss, when congestion occur, UBR+EPD mechanism is proposed to improve the throughput in TCP over UBR, and ER scheme is suggested in TCP over ABR. In this paper, we analyzed the performance improvement effect of UBR+EPD with FRR (Fast Retransmission and Recovery), the adjusting EPD threshold parameter (R), and variation of MTU (Maximum Transport Unit) size. As a result, through the analysis of performance, we know that the improved throughput and fairness are shown by the proposed scheme.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.48-55
• /
• 1997

Advances in VLSI technology have brought us completely new design principles for the high-performance switching fabrics including ATM switches. From a practical point of view, port scalability of ATM switches emerges as an important issue while complexity and performance of the switches have been major issues in the switch design. In this paper, we propose a cost-effective approach to modular ATM switch design which provides the good scalability. Taking advantages of both time-division and space-division switch architectures, we propose a practically implementable large scale ATM switch architecture. We present a scalable shared buffer type switch for a building block and its expansion method. In our design, a large scale ATM switch is realized by interconnecting the proposed shared buffer switches in three stages. We also present an efficient control mechanism of the shared buffers, synchronization method for the switches in each stage, and a flow control between stages. It is believed that the proposed approach will have a significant impact on both improving the ATM switch performance and enhancing the scalability of the switch with a new cost-effective scheme for handling the traffic congestion. We show that the proposed ATM switch provides an excellent performance and that its cell delay characteristic is comparable to output queueing which provides the best performance in cell delay among known approaches.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1493-1503
• /
• 1999

ATM Clustering System과 같이 SAN(System Area Network) 환경에서 동작하는 시스템은 낮은 지연시간과 넓은 대역폭의 네트워크가 필수적이나 기존의 에러 복구 프로토콜들은 이러한 요구를 충족시키기에는 큰 오버헤드를 가지고 있다. 제안된 새로운 에러 복구 프로토콜은 ATM Clustering System 환경에서 최적의 성능을 나타내는 light-weight 프로토콜로 에러가 없는 상황과 에러 복구가 진행중인 상황에 따라 acknowledgement 주기를 적응적으로 변화시키는 adaptive acknowledgement scheme를 제안하여 적용하였다. 제안된 프로토콜은 상용 툴인 SDT를 이용한 논리 검증 받았고, DEVSim++ 환경에서의 성능 분석을 통해 프로토콜이 최상의 성능을 보이기 위한 파라메터 값을 찾았고, 이 값을 적용하였을 때의 성능을 기존의 프로토콜과 비교하여 제안된 프로토콜이 더 우수함을 확인하였다.Abstract While a system working with SAN, such as ATM Clustering System, requires a network with low latency and wide bandwidth, the previous error recovery protocols have a serious network overhead to satisfy this requirement. The suggested error recovery protocol is a light-weight protocol which can shows its best performance at ATM Clustering System and uses a newly suggested adaptive acknowledgement scheme. In the adaptive acknowledgement scheme, the period of acknowledgement is dynamically changed depending on the state of the network. We proved the logical correctness of our protocol with SDT and did performance analysis with DEVSim++. From the analysis, we found the optimal parameter values for best performance and showed that our protocol works better than the previous error recovery protocols.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.179-190
• /
• 1998

One of the most important topics of recent years is that a multimedia technology such as wireless ATM has been introduced in radio systems for video, voice and data transmission. A major problem in such systems is the occurrence of errors due to multipath fading or interference. To combat this problem, forward error correction (FEC) coding is commonly used as a means of eliminating these errors. This paper has analyzed theoretically the effect of fading to design effective wireless ATM system. The BER, CLR, and CER of wireless ATM system adopting FEC coding and diversity reception techniques have been derived in fading environment. Also, simulations of BER and CLR have been carried out and compared with the above theoretical results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.9
• /
• pp.12-20
• /
• 2001

The ATM-PON has an important meaning at next generation access network because the equipment transmits various types of user traffic with a single platform through the passive optical splitter. Ranging is a technology to place all ONUs at the same virtual distance in order to provide the synchronization for the upstream signal in the ATM-PON based on the Time Division Multiplexing (TDM). In this paper, we review the merits of ATM PON and related protocol for the PON operation. We summarize and analyze the steps about the ranging protocol based on ITU-T G.983.1 and implement a simulator that can simulate the ranging procedure based on our modeling. In this paper, we can investigate time requirements of G.983.1 by using the simulator and find out the wasted rate of the bandwidth during the ranging procedure in order to know the influence for ONUs while ATM-PON is in-service. Also, we show that a new ranging scheme reducing window size can avoid the degradation of quality of service of ONUs in service with simulation.