• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.255-261
• /
• 1998

The train automatic operation control system is an on-board train control system that is widely adopted in modern rapid transit systems. The control system consists of TCMS(Train Control and Monitoring System), ATC(Automatic Train Control), ATO(Automatic Train Operation) and TWC(Train to wayside communication) in the train and wayside facilities. The functions of the system is to regulate train riding comfort, to service limited speed and smoothness during start, acceleration, constant speed travel, and fixed point parking under the corresponding commands. The paper describes the simulation model of the train automatic operation control of subway system, configuration of simulator hardware and software and operational algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.107-109
• /
• 2004

Assuming that life of urban transit signaling is about 20 years with the flow of technology development, Seoul urban transit will be required to prepare for improvement soon. The highly developed countries preceding several levels rather than Korea are faced with commercial service, which uses RF, ATC and ATO in Train Control System. European highly developed countries in the field of railroad have been progressing standardization and technology development of signaling associated with related manufacturers for direct operation between nations. For that, a effective train control system with radio beyond control levels by the existing wayside-onboard communication is in a developed and used stage. The systems, which advanced countries have been progressing, seem to be applied to domestic within 5 years from now. At present, there are no countries using CBTC for service throughout the world. So, this is investigated to focus on the routes ready to be installed with completed CBTC and trying to introduce the technology. Especially, considerations for economic aspect are mainly reviewed about controlling ability of headway, flexibility, extension aspect and construction cost on the basis of paper examined in NYCT.

• 한국항공운항학회지
• /
• 제22권1호
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권9호
• /
• pp.545-551
• /
• 2004

CBTC(Communication Based Train Control) System can improve train operation efficiency by realizing moving block system which makes a continuous train interval control in accordance with the position and speed of train. Adopting radio transmission to make a continuous detection of train position and transmit the control data from the ground to a train, CBTC needs dedicated train operation and control algorithm which should be quite different from the conventional track-circuit-based train control system. This paper provides a train operation display and control algorithm for CBTC system in making train interval control, train route control and train supervision. Signalling pattern diagram is devised to analyze the train interval control mechanism of moving block system, and interlocking logic is devised to represent the train route control mechanism of moving block system. For train supervision, train occupation status on railway are displayed by using the segment which virtually divide the whole railway. The proposed method has been successfully applied to the development of CBTC system for the standardized AGT(automatic guided transit) which is under construction now in Korea, and also can be applied to any other CBTC system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1551-1559
• /
• 2007

Seoul Metro has been constructing the screen doors on the platforms to provide safe and comfort environments. The screen doors of each station are configured so that they can be operated in automatic mode in connection with ATC/ATO through the integrated control panel in the station control room and in manual mode through the control panel of the station control room and crew control panel. These systems have been implemented with different data communication protocols between systems, HMI configuration, and so on due to ordering processes, implementation time and diverse suppliers, and manufactured to be operated within single station. Seoul Metro has been planning to implement the integrated control system to secure seamless train operation and safety and to have a fast response system against emergency situations such as PSD failure and fire, by implementing the system that is able to collectively manage, monitor and control the operation status and equipment conditions of PSD on to the integrated control center. This paper has studied a scheme to reduce the budget for the future facility constructions by standardizing the data format for data communication with the integrated station control panel and using the open standard protocols, in order to secure consistency of operation, system expansion and maintenance with unified and standardized control items.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1335-1337
• /
• 2003

한국형 고속 전철 과제는 6년의 과제 기간을 가시는 국가 연구 사업으로, 한국 실정에 적합한 차세대 고속 전철을 시험 제작하여 운용하는 것이 목적이다. 시속 350 km/h의 운행 속도를 목표로 하는 한국형 고속 전철은 현재 개발이 완료되어, 시험 주행 트랙에서 증속을 위한 시험 운행을 계속하고 있다. 한국형 고속 전철은 열차 내 각종 제어 장치들 간의 데이터 교환를 위해서 실시간 네트워크인 열차통신 네트워크(Train Communication Network; TCN)를 사용한다. 약 10년간의 표준 보완 기간을 거쳐서 1999년 국제 표준으로 확정된 TCN(IEC61373)은 열차 전용의 실시간 통신 네트워크로 열차 장치의 제어 및 진단에 적합한 다양한 기능과 특징을 가지고 있다. 한국형 고속전철은 열차의 주 제어 및 감시를 담당하는 주관 제어장치(SCU, Supervisory Control Unit)와 열차 안전에 중요한 역할을 하는 자동 열차 제어 장치(ATC, Automatic Train Control)을 포함하는 55개의 제어 장치들이 TCN으로 연결되어서 상호간의 데이터 교환을 수행하도록 구성되어 있다. 본 논문에서는 한국형 고속전철에 사용될 TCN의 구조와 실제 필드에 사용되어지기 위해서 필수적으로 필요한 네트워크의 고장 진단 기법에 대해서 설명한다.

• 항공우주정책ㆍ법학회지
• /
• 제28권2호
• /
• pp.117-144
• /
• 2013

국토교통부는 현행 항공법 체계 내에서 무인항공기급 비행안전기준 마련을 추진중에 있다. 이에 부응하여 군용항공기 운용 등에 관한 법률에 무인항공기 관련 내용의 보완 검토도 필요하다고 판단된다. 무인항공기 비행규칙은 무인항공기를 운용해야할 공역을 기준으로 적용할 비행원칙과 운용자 위치, 임무운용한계, 구비물품 등을 들 수 있다. 또한 실제 비행에 적용해야 할 규칙으로는 일반비행규칙, 시계비행규칙, 계기비행규칙 등이 요구된다. 그리고 무인항공기체계 운용자 간에 이루어지는 통화, 관제 및 통신사항, 공역 및 구역별 비행 등에 대한 적용규칙 마련도 필요하다고 할 수 있다. 공역에서의 무인항공기 운용은 항공기 성능에 대한 능력을 보장받는 것이 중요하지만 그에 못지않게 필수적으로 요구되어지는 것은 표준화된 비행기준이라고 할 수 있다. 이러한 비행규칙과 공역에 대한 관리기준을 공역사용자가 모두 숙지하고 비행에 적합하게 적용하여야만 안전하고 원활한 비행운용이 가능하다. 본 논문은 표준화된 비행규칙과 법률의 보완을 위해 연구하였다.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.43-63
• /
• 1996

The purpose of this study is to find out what is the functional role of VTS in order to get the people concerned with marine traffic/transportation understand about VTS. VTS could be described as the essential risk management system in both cost effective on cost-benefit analysis and the sea space or time management at port, coastal environment. The important role of the VTS are those functions such as the decision making infrastructure, the passive/active safety measures at sea. VTS could not control/regulate marine traffic as strong as ATC(Air Traffic Control) owing to the marine traffic characters. However, the right and responsibility of VTS finally are belong to the master, pilot and mariners. For the benefit of the electronic technology development, VTS system also cloud be upgraded to communication system from information system. In connection with these system upgrading, the right and responsibility of VTS/staff should be supported by domestic legal system. The followings are presented for VTS to be effective. First, the cooperation and understanding of VTS between the peoples concerned with marine traffic/transportation are essential. Because they are all data supplier and also information consumers. Second, VTS staff/regulator should be selected, educated, trained accordingly as per their career, ability, quality, qualification, certification and etc. Third, the port reliability from VTS users depends on the factors such as economic interests, safety and effectiveness/efficiency of VTS.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.46-54
• /
• 2012

One major safety issue of surface operations is the occurrence of runway incursions. Runway incursions are the consequence of multiple operational and/or environmental factors. Human error is known to contribute to almost every runway incursion. One major contributing factor for runway incursion is crew's lack of situational awareness during airport surface operations, induced by weather considerations, by complex airport factors or by crew technique itself; it is also caused by ATC issues. Various airport factors may affect pilot situational awareness, distract the crew, or lead to crew confusion. The recommendations to avoid runway incursions are manifold; Proper Crew's CRM/TEM skills, adequate communication technique, proper knowledge of airport surface markings, lights and signs and preparation of preparation of expected taxi out/in routing. Also runway incursion risk assessment on specific airport before flight may lead to aware of risk level and contribute to prevent runway incursion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2169-2173
• /
• 2003

The development project of Korean High Speed Train (KHST) was started in 1996. As a national research project, the KHST project aims for a development of the next generation prototype train that has a maximum speed of 350 km/h. The development process of prototype KHST including 7 vehicles was completed last year and currently the prototype train is on its way of test running over the test track with gradually increased speed. The prototype KHST uses the real time network called TCN (Train Communication Network) for exchanging information between various onboard control equipments. After 10 years of development and modification period, TCN was confirmed as international standard (IEC61375-1) for the electrical railway equipment train bus. In the prototype KHST, all major control devices are connected by TCN and exchange their information. Such devices include SCU (Supervisory Control Unit), ATC (Automatic Train Control), TCU (Traction Control Unit), and so forth. For each device that sends and receives data using TCN, a device has to find out whether TCN is in normal or failure state before its data exchange. And also a device must have a proper method of data validation that was received in a normal TCN state. This is a one of the major important factors for devices using network. Some misleading information can lead the entire system to a catastrophic condition. This paper briefly explains how TCN was implemented in the prototype KHST train, and also shows what kind of the fault diagnosis method was adopted for a fail safe operation of TCN system