• 한국초지조사료학회지
• /
• 제25권1호
• /
• pp.7-16
• /
• 2005

This experiments were carried out to determine growth characteristics, dry matter yield and voluntary intake of silage according to growth stage of Sorghum$\times$sudangrass(SSH) hybrid in mono-cropping and inter-cropping(C; com, T1; cutting of SSH at milk stage. T2; cutting of SSH at dough stage, T3; cutting of SSH at yellow ripe stage, T4; cutting of SSH and soybean at milk stage, T5; cutting of SSH and soybean at dough stage, T6: cutting of SSH and soybean at yellow ripe stage). Results obtained from these experiments are as follows; Plant length and leaf length of SSH(T2, T3, T4. T5 and T6)) were higher than C. T1 treatment was lower than it. C showed $2.3\~2.9$ times higher stem diameter as 29.5mm compare to SSH(T1, T2, T3, T4, T5 and T6). soybean(T4, T5 and T6) was lower in $4.3\~5.4$ times. But SSH of inter-cropping treatment(T4, T5 and T6) showed highly comparing with mono-cropping(T1, T2 and T3) at the same maturity. Leaf rate and stem hardness of SSH(T1, T2, T3, T4, T5 and T6) were lower than C. The fresh yield was high line with T2(72,320kg/ha), T1(69,103kg/ha), T3(68,333kg/ha) and C(57,988kg/ha), dry matter yield was high in line with T3(22.413kg/ha), T2(21,479kg/ha), C(19,252kg/ha) and T6(18,175kg/ha), (P<0.05). Protein dry matter yield was higher in T3(1,434kg/ha), C(1,386kg/ha)T5 and T6(1,345kg/ha) it was lower in T1(872kg/ha), (P<0.05). Crude protein of silage of T4 and T5 was higher than C, T2 and T3 were lower than it(P<0.05), while NDF content was not different. ADF content of T6 was higher than those of the other treatment. The highest hemi-cellulose among treatments was shown in T1 whereas T6 showed the lowest. Fresh intake of silge was 160.4, 155.8, 168.7, 172.9, 132.9, 158.7 and 185.2 g/BW for C, T1, T2, T3, T4, T5 and T6, respectively. Dry matter intake was high in line with T6(60.3g), C(153.8g), T3(53.6g), T5(47.8g), T2(46.8g), T4(35.2g) and T1(34.48g/BW), (P<0.05). Crude protein intake was high in line with T6(3.9g), T5(3.4g), C(3.4g), T2(2.9g), T3(2.9g), T4(2.6g) and T1(2.3g/BW), (P<0.05). As mentioned above the results, mono-cropping(T3) and inter-cropping(T5 and T6) could be recommended as increasing method of sorghum $\times$ sudangrass hybrid silage utilization when silage intake of dry matter and crude protein were considered.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.156-161
• /
• 2005

The thermal transitions of a nylon 6/layered silicate nanocomposite were studied by differential scanning calorimetry and in-situ synchrotron X-ray diffraction. The drawn film of the nylon 6/layered silicate nanocomposite typically showed three endotherms in the DSC thermogram; a very broad endotherm at $\sim120^{\circ}C(T_{1})$, a double-melting endotherm at $\sim215^{\circ}C(T_{2})$, and a high temperature endotherm at $\sim240^{\circ}C(T_{3})$. The drawn film of the nylon 6/ layered silicate nanocomposite was comprised of a mixture of the $\alpha and \gamma$ forms, with $the \alpha form$ being generated by drawing the pressed film having $the \gamma form$. The melting and crystallization of the crystals were observed at the above thermal transitions during the heating experiment performed at the Pohang X-ray synchrotron radiation source (4C2). The newly generated form was meta-stable and melted $at {\sim}T_{1}$. The double-melting $at {\sim}T_{2}$ was due to the exothermic crystallization of $the \alpha form$ during the main endothermic melting of $the \gamma form$. $The \alpha form$ crystallized $at {\sim}T_{2}$ and melted $at {\sim}T_{3}$.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1432-1437
• /
• 2018

This work investigated edge-cracking behavior of equiatomic CoCrFeMnNi high-entropy alloy during hot rolling at rolling temperatures $500{\leq}T_R{\leq}1000^{\circ}C$. Edge cracks did not form in the material rolled at $500^{\circ}C$, but widened and deepened into the inside of plate as $T_R$ increased from $500^{\circ}C$. Edge cracks were most severe in the material rolled at $1000^{\circ}C$. Mn-Cr-O type non-metallic inclusion and oxidation were identified as major factors that caused edge cracking. The inclusions near edge region acted as preferential sites for crack formation. Connection between inclusion cracks and surface cracks induced edge cracking. Rolling at $T_R{\geq}600^{\circ}C$ generated distinct inclusion cracks whereas they were not serious at $T_R=500^{\circ}C$, so noticeable edge cracks formed at $T_R{\geq}600^{\circ}C$. At $T_R=1000^{\circ}C$, significant oxidation occurred at the crack surface. This accelerated edge crack penetration by embrittling the crack tip, so severe edge cracking occurred at $T_R=1000^{\circ}C$.

• 대한간호학회지
• /
• 제50권3호
• /
• pp.369-384
• /
• 2020

Purpose: The purpose of this study was to analyze anxiety and depression among infertile women at different time points during the first In Vitro Fertilization (IVF) or Intracytoplasmic Sperm Injection (ICSI) treatment through a systematic review and meta-analysis. Methods: Seven out of 3,011 studies were included for meta-analysis. To estimate the effect size, a meta-analysis of the studies was performed using the RevMan 5.3 program. We compared the measurement outcomes at three time points: before the start of treatment (T0), cancellation of treatment after pregnancy detection (T2), one to six months after treatment (T3). The effect size used was the standardized mean difference (SMD). Results: In comparing the different time points of the pregnant women from their cycle, significantly lower levels of depression were found at T2 than at T0. In non-pregnant women, anxiety at T2 and depression at T2 and T3 were significantly higher than those at T0. At T2 and T3, the non-pregnant women reported higher levels of anxiety and depression compared with the pregnant women. Conclusion: Anxiety and depression in infertile women undergoing the first IVF or ICSI are associated with the time points and pregnancy status after treatment. These findings suggest that attention should be paid to helping infertile women prepare for and cope with treatment and treatment failure.

• 대한치과교정학회지
• /
• 제54권1호
• /
• pp.59-68
• /
• 2024

Objective: To investigate the long-term effects of maxillary skeletal expander (MSE) treatment on functional breathing. Methods: Objective measures of breathing, the peak nasal inspiratory flow (PNIF), and peak oral inspiratory flow (POIF), and subjective measures of breathing, the visual analog scale (VAS) and nasal obstruction symptom evaluation (NOSE) survey, were used to investigate the long-term effects of MSE in functional breathing. Seventeen patients, mean age 19.4 ± 3.9 years treated at the UCLA Orthodontics Clinic were assessed on their functional breathing at 3 timepoints: pre-expansion (T0), post-expansion (T1), and post-orthodontic treatment (T2). Results: Immediately after expansion (T1), all the objective functional breathing values were significantly increased in comparison to T0 (P < 0.05). The VAS total, VAS right and VAS left were significantly lower at T1 in comparison to T0 (P < 0.05). At 26.8 ± 3.9 months after MSE expansion (T2), PNIF total, PNIF right, PNIF left, and POIF were significantly higher when compared to T0 (P < 0.05). Also, VAS total, VAS right and VAS left were significantly lower at T2 when compared to T0 (P < 0.05). Additionally, there was a positive correlation between PNIF and the magnitude of expansion at anterior nasal spine and zygomaticomaxillary point (ZMA). There was a positive correlation between total VAS and the magnitude of expansion at the ZMA. There were no significant changes for the NOSE subjective breathing measurement at all time comparisons. Conclusions: Overall, MSE treatment produces an increased objective and subjective airway improvement that continues to remain stable in the long-term post expansion.

• 한국초지조사료학회지
• /
• 제27권3호
• /
• pp.209-218
• /
• 2007

본 실험은 파종시기 및 경운횟수가 옥수수의 생육특성, 건물수량, 영양수량 및 사일리지 기호성에 미치는 영향을 구명하기 위하여 파종시기 및 경운횟수를 통한 5처리(C : 파종 5월 5일, 경운회수 1회, 인력제초 1회, T1 ; 파종 5월 12일, 경운회수 2회, T2 : 파종 5월 19일, 경운회수 3회, T3 : 파종 5월 21일, 경운회수 4회, T4 : 파종 6월 2일 경운회수 5회) 3반복으로 2006년 5월부터 2006년 10월까지 상주대학교 부속 실습농장내 사료포장에서 실시하였으며, 그 결과를 하면 다음과 같다. 초장과 착수고는 C > T1 > T2 > T3 > T4구순으로 높게 나타났지만 초장에서는 유의적인 차이가 없었으며 착수고에서는 처리구간 유의적인 차이를 보였다(p<0.05). 엽장은 T2가 96.0cm로 가장 길게 나타났지만 처리구간 유의적인 차이는 나타나지 않았다. 엽폭은 C와 T3구가 (11.2cm), 고사엽은 C 및 T1구가 각각 4.6엽으로 가장 높게 나타났다. 경의 굵기에 있어서는 T3구가 31mm로 가장 높았던 반면 T2구가 25mm로 가장 가늘게 나타났다(p<0.05). 암이삭 둘레는 C(17.1 cm) > T1(15.6 cm) > T4(15.4 cm) > T3(15.3 cm) > T2(15.2cm) 순으로 높게 나타났으며(p<0.05), 암이삭 충실도는 C구가 8.8로서 가장 높았던 반면 T4구가 6.0으로서 가장 낮게 나타났다 (P<0.05). 경의 경도와 알곡 경도는 파종시기가 빠른 순 인 C > T1 > T2 > T3 > T4순으로 나타났다(p<0.05). 그리고 경의 당도는 T1구가 6.1%로 가장 높고, T2구가 3.0%로 가장 낮게 나타났다(p< 0.05). 잡초 발생량은 C구가 500 kg/ha으로 가장 적게 T1구가 44,100 kg/ha로서 가장 높게 나타났으며 (P<0.05), 잡초의 피복도는 T1 > T2 > T3 > T4 > C구순으로 높게 나타났다(p<0.05). 생초수량은 C구가 73,550 kg/ha로서 가장 높았던 반면 T4구가 65,500 kg/ha로서 가장 낮은 수확량을 보였다(p<0.05). 건물수량에 있어서는 C(26,978 kg/ha) > T1(26,130 kg/ha) > T2(20,255 kg/ha) > T3(20,255 kg/ha) > T4(17,508 kg/ha)구 순으로 높게 나타났다(P<0.05). 조단백질 함량은 T1 > T4 > T2 > T3 > C구순으로 높았으며(p<0.05), 조지방은 C > T1 > T2 > T3 > T4구순으로 높았다. 상대기호성은 Holstein, 염소 및 꽃사슴에서는 C구가 가장 높은 기호성을 보였으나 한우에서는 T1구가 가장 높게 나타났다.

• 산업경영시스템학회지
• /
• 제34권2호
• /
• pp.1-8
• /
• 2011

This paper proposes a variable sampling interval multivariate $T^2$ control chart with sampling at fixed times, where samples are taken at specified equally spaced fixed time points and additional samples are allowed between these fixed times when indicated by the preceding $T^2$ statistics. At fixed sampling points, the $T^2$ statistics are composed of all quality characteristics and a part of quality characteristics are selected to obtain $T^2$ statistics at additional sampling points. A Markov chain approach is used to evaluate the performance of the proposed chart. Numerical studies for the performance of the proposed chart show that the proposed chart reduces the observations obtained from a process and detects the assignable cause of a process with low correlated quality characteristics quickly.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.218-223
• /
• 1997

과냉각액체구역(${\Delta}T_{x}=T_{x}-T_{g}$)을 갖는 $Fe_{80}P_{10}C_{6}B_{4}$ 조성에 천이금속(Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Co, Ni, Pd, Pt및 Cu)를 첨가하여 이들 원소가 유리화온도($T_{g}$), 결정화온도($T_{x}$) 및 과냉액체구역 (${\Delta}T_{x}$)에 미치는 영향에 \ulcorner여 조사하였다. $Fe_{80}P_{10}C_{6}B_{4}$ 합금의 ${\Delta}T_{x}$ 값은 27K였으나 이 합금에 Hf, Ta 및 Mo을 각각 4at%첨가하면 그 값이 40k 이상으로 증가하였다. 이같은 ${\Delta}T_{x}$ 값의 증가는 유리화온도($T_{g}$의 상승보다 결정화온도($T_{x}$)의 상승폭이 크기 때문이다. $T_{g}$ 및 $T_{x}$는 외각전자밀도(e/a)가 약 7.38에서 7.05로 감소할수록 상승하였다. e/a의 감소는 천이금속과 다른 구성원소(반금속)사이의 상호결합상태를 의미한다. 즉 $T_{g}$ 및 $T_{x}$의 상승은 강한 상호결합력에 기인하는 것으로 사료된다.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.869-874
• /
• 1992

The physical and electrical properties of TiN/TiSiS12T bilayer were studied. The TiN/TiSiS12T bilayer was formed by rapid thermal anneal in NHS13T ambient after the Ti film was deposited on silicon substrate. The Ti film reacts with NHS13T gas to make a TiN layer at the surface and reacts with silicon to make a TiSiS12T layer at the interface respectively. It was found that the formation of TiN/TiSiS12T bilayer depends on RTA temperature. In this experiment, competitive reaction for TiN/TiSiS12T bilayer occured above $600^{\circ}C$. Ti-rich TiNS1xT layer and Ti-rich TiSiS1xT layer and Ti-rich TiSiS1xT layer were formed at $600^{\circ}C$. stable structure TiN layer TiSiS12T layer which has CS149T phase and CS154T phase were formed at $700^{\circ}C$. Both stable TiN layer and CS154T phase TiSiS12T layer were formed at 80$0^{\circ}C$. The thickness of TiN/TiSiS12T bilayer was increased as the thickness of deposited Ti film increased.

• 설비공학논문집
• /
• 제13권3호
• /
• pp.145-152
• /
• 2001

Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.