• Proceedings of the KIEE Conference
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.903-906
• /
• 1992

At present the XLPE insulated power Cables have installed until 154KV level in KOREA. Therefore, our company has developed 275KV XLPE cable as a means 345KV level-up of CV cable as well as exploitation of overseas markets. In this paper, the outline of design standards, manufacturing processes and test performance of 275KV CV cable are described.

• Transactions of Materials Processing
• /
• 제19권6호
• /
• pp.363-371
• /
• 2010

In ultrasonic vibration drawing, the drawing forces can be reduced by applying ultrasonically oscillating dies. Ultrasonic vibration drawing has been considered as a means of accommodating high-level drawing processes such as shaped wire, ultrafine wire, and the wire drawing operation in semidry or dry condition. Prior studies were attempted to analyze the mechanism of improved drawing performances, such as reduced drawing force and improved lubrication characteristic. However, researches on design rule for ultrasonic vibration drawing system are not yet carried out. The principal objectives of this work are to design a set of tooling capable to superimpose the oscillations and to observe by experiments the influence of the ultrasonic oscillations on the wire drawing.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2023-2025
• /
• 2000

Globally, movements for an environmental preservation have been further extended in all the areas of industries. In the manufacturing area. environment-friendly properties for all the manufactured products are increasingly required by many national standards. For EHV oil-filled cables. Hard Alkylbenzen has been applied as an impregnated insulating oil. But as it flows into the soil during failures, such as oil leakage, the oil is not dissolved by microbes and then causes an environmental pollution. Recently some countries are increasingly requiring Soft Alkylbenzen which is dissolved by microbes. This paper describes the electrical and environmental properties of Soft Alkylbenzen. applied for a 230kV oil-filled cables at a Singapore's project.

• Journal of Applied Reliability
• /
• 제5권4호
• /
• pp.405-412
• /
• 2005

In this paper, we verified the failure mechanism of the discolored masking tape wrapped around the wire and studied an improved case study as well. Masking tapes are poly(Vinylchloride-co-Methyl methacrylate) (PVC) and the wire connecting with indoor/outdoor components of the air conditioner is chloroprene(CR). The masking tape under. the ultraviolet ray was accelerated to discolor fivefold. The results determined reveal the discoloration of masking tapes as an elution of the additives, dephenyl Amine series antioxidants, in the connecting wire. When changed dephenyl Amine series to phenol series, we found that the degree of discoloration was dramatically decreased. Due to stink of Thiourea and Thiuram monosulfide, as accelerators in CR wire, we controlled the vulcanization temperature and time without using these accelerators and could get the wire not to smell bad with the equal mechanical properties.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1632-1636
• /
• 2007

Generally, fine high carbon steel wire is produced using a multi-pass drawing process with speeds over 1000 m/min. The productivity of the wire drawing mainly depends on achieving the highest drawing speed without breaking the wire. In the multi-pass drawing, as the final drawing speed increases, the temperature rises several hundred Celsius. High temperature of wire increases the brittleness and leads to breaks. The objective of this study is to design pass schedule and wire drawing machine for superhigh speed. In the drawing experiment, it was possible to increase the productivity through the increase in final speed from 1100 m/min to 2000 m/min.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.250-253
• /
• 2001

Mechanical properties of gold bonding wire for VLSI packaging have been studied. The diameters of gold wires are about 20-30 micrometer and fracture loads are 8-20 gram force. The elastic modulus, yield strength, fracture strength and elongation properties have been evaluated by micro-tensile test method. This work discusses for an appropriate selection of micro-force testing system and grip design in mim testing. The best method to determine gauge length of wire and to measure tensile properties has been proposed. The mechanical properties such as strength and elastic modulus of current gold bonding wire are higher than pure those of gold wire.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제8권3호
• /
• pp.23-27
• /
• 1999

A lot of electronic parts are used for recent vehicles. If electronic parts break down, it will bring passenger to fatal wound. The very representative trouble of electronic parts is a cut aluminium wire of a hybrid IC. In this study, I analyzed a cause of cut aluminium wire and the main results obtained on this study are summarized as follows; (1) The forces acting on the aluminium wire are because of thermal expansion of a resin. (2) The forces acting on the aluminium wire are obtained by the theoretical analysis and those results are agree well with those of the FEM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제19권7호
• /
• pp.1684-1690
• /
• 1995

A large time asymptotic solution for an unsteady heat conduction problem of a coated hot wire thermal conductivity measurement process was theoretically found. The solution revealed that the slope of wire temperature versus logarthmic time, which is used to evaluate the thermal conductivity, remains unchanged for large values of time even if a layer of coating is present on the hot wire. The significance of this result is that the thermal conductivity of an electrically conductive fluid can be measured with a coated hot wire using the same conversion relation as for a bare wire.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제7권4호
• /
• pp.50-55
• /
• 2008

CNC wire bending machines are used in industries to make a type variety of wire products such as long links. The machines have a long arm device to rotate in order to remove forming errors by flexibility of wire. Generally, the machines which constructed servo motors in the arm have the rotating range of the arm under 360 degree because the servo motors connect with fixed control devices on frame by many cables. The rotating angle under 360 degree limits working speed and forming geometry. Therefore this study developed a gear train to drive a parts in arm and to be independent on arm rotation movement. The developed gear train can transfer four movements to four components in arm and is consists parallel of four pairs of satellite gear trains. This study constructed the CNC wire bending machine with the developed gear train and verified that the gear train could drive internal components independently on arm rotation.

• Journal of Korea Foundry Society
• /
• 제29권5호
• /
• pp.198-203
• /
• 2009

In order to manufacture copper ultra fine wire used for bonding wire in integrated circuit package, continuous casting process, which can produce high purity copper rod with small cross section, and wiredrawing process have to be optimized to prevent wire brakeage during entire manufacturing process of fine wire. The optimum condition for producing copper rod with mirror surface has to established by investigation of the effects of several parameters such as withdrawal speed, superheat and rod diameter on grain morphology of the cast rod and on its drawing characteristics to fine wire. The purpose of this study is to propose the optimized process parameters in continuous casting process in order to produce cast rod without internal defects, and to predict microstructure orientation suitable for wire drawing process.