• 한국통신학회논문지
• /
• 제34권5A호
• /
• pp.414-420
• /
• 2009

본 논문에서는 OFDMA 기반 relay 시스템에서 throughput 성능개선을 위한, Base Station (BS)과 Relay Station (RS)의 sub-cell 커버리지 설정기법을 제안한다. Relay 시스템에서는 BS-RS 링크에서 무선 자원을 추가로 소비하므로, RS간 자원의 재사용을 고려하면 자원의 효과적 사용이 가능하다. 그러나, 이때 신호의 간섭이 증가하므로 단말기의 수신 Signal to Interference and Noise Ratio (SINR)에 영향을 미치게 된다. 그리므로 본 연구에서는 자원 재사용 정도에 따른 사용가능 자원의 증가를 수신 SINR과 함께 sub-cell 커버리지 결정의 요인으로 함께 고려한다. 모의실험을 통한 결과분석을 통해 throughput 성능을 개선할 수 있는 sub-cell 커버리지를, 다양한 자원재사용 패턴에 따라 도출하였다.

• 한국식품조리과학회지
• /
• 제22권4호통권94호
• /
• pp.477-487
• /
• 2006

The quality characteristics of dough and French breads containing dietary fibers, which were resistant starches (RS3 and RS4 types) and commercial non-starch polysaccharides (cellulose, pectin and chitosan), were investigated. The pH of the dough containing all dietary fiber except pectin was greater than that of control and was increased with increasing addition level. There was no correlation between pH and the expansion ratio of dough. As the level of added dietary fibers became high, the bread baking loss decreased, and the order of specific bread volume was 5% cellulose < 5% pectin < control bread, with no significant difference in specific volume. When a high level of dietary fibers was added to wheat flour, a complex phase appeared due to the formation between the network structure of additives and wheat gluten, and starch granules were heavily masted by the increased development of gluten-network matrix after the first fermentation like a wide spread net. Comparing the colorimetric changes of breads with the same added ratio (10%) of dietary fibers, the cellulose and RS4 addition breads had lower levels and the pectin-added bread had the highest value in the redness, while the chitosan-added bread had the highest value in the yellowness. Breads with a high level of dietary fibers showed increased hardness, gumminess, and brittleness and decreased springiness and cohesiveness. By sensory data, breads with 5% NSP and 10% RS addition showed high overall acceptability, with higher sensory RS score, compared to NSP addition. In conclusion, it was suggested that bread with lower than 10% RS or 5% NSP addition based on the amount of wheat flour, was acceptable with no considerable change in preference/overall quality and processing in bread-making.

• Preventive Nutrition and Food Science
• /
• 제21권3호
• /
• pp.202-207
• /
• 2016

The aim of this study was to investigate the association of CD36, a class B scavenger receptor, rs6969989 polymorphism with the serum lipid profiles in Korean women, together with their modulation by oily fish consumption. Subjects were participants from the Korean Genome Epidemiology Study (KoGES), which was initiated in 2001 as a large-scale. A total of 4,210 women aged 39 to 70 were included in this study. Data were collected using self-administered questionnaires, anthropometric measurements, and blood chemical analysis. Dietary intake was analyzed using a semi-quantitative food frequency questionnaire. The minor allele frequency for rs6969989 was found in 12% of this population. Homozygotes minor G allele at the rs6868989 exhibited significantly higher high density lipoprotein cholesterol (HDLC) concentrations (P-trend=0.043) and lower fasting glucose (P-trend=0.013) than major allele A carriers. The risk of low HDL-C was significantly lower in homozygotes for the G allele than the A allele carriers (P-trend=0.032). Gene-diet interaction effects between rs6969989 and oily fish intake were significantly associated with the risk of dyslipidemia (P-interaction=0.004). Subjects with homozygotes minor G allele and high oily fish intake generally had a lower risk of dyslipidemia than did those with major allele homozygotes and low oily fish intake. These findings supported that oily fish consumption may modulate the contributions of CD36 rs6969989 on genetic predisposition to the risk of dyslipidemia.

• 한국자기학회지
• /
• 제22권4호
• /
• pp.117-120
• /
• 2012

각기 암염(rocksalt: RS) 구조와 zinc-blende(ZB) 구조를 가지면서 덩치상태에서 반쪽금속성을 나타내는 NaN 화합물에서 표면의 전자구조를 계산하고 반쪽금속성이 표면에서도 유지되는지를 제일원리 전자구조 계산을 통해 검토하였다. 이를 위해 두 가지 원소를 모두 가진 표면, 즉 RS(001) 표면과 ZB(110) 표면을 고려하였다. 각각의 판에 대해 계산된 자기모멘트는 정수로서 이는 표면에서도 반쪽금속성이 유지됨을 나타낸다. 이러한 사실은 각 원자에 대한 상태밀도를 통해서도 확인할 수 있었다. 각각의 계에서 자기모멘트 값에 대해 N 원자들이 주된 기여를 하였고, 두 계 모두에서 표면 N 원자의 자기모멘트는 덩치 값에 비해 증가 하여 각기 $0.75{\mu}_B$를 가졌다. Na 원자가 자성에 기여하는 바는 미미하였으며 표면으로 갈수록 그 자기모멘트가 줄어들어 자성을 거의 나타내지 않았다. 반쪽금속성을 나타내는 띠간격의 크기는 가운데 층이나 표면층이나 큰 차이가 없었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.649-652
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,2D2) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of $10^{-3}$.

• 한국산업정보학회논문지
• /
• 제9권2호
• /
• pp.17-22
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,202) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of 10/sup -3/.

• 한국농공학회논문집
• /
• 제49권5호
• /
• pp.45-54
• /
• 2007

The purpose of this paper is to test the applicability of the rural amenity values assessment model(RAVAM) to a case study area. To verify the practical applicabilities of the RAVAM, south-east area of Kyounggi province was selected as a study area. Full data of 101 Myuns of Kyounggi province were gathered with Geographic In-formation System(GIS) and Remote Sensing(RS) techniques. All the 101 Myuns' rural amenity resources were assessed. Cluster analysis was performed on almost intact nature, interaction between nature and man, man-made amenity values to classify rural amenity characteristics. It was expected that the proposed RAVAM could be used in developing rural development plans considering local rural amenity resources' distribution.

• 대한수학회논문집
• /
• 제33권2호
• /
• pp.571-580
• /
• 2018

The object of the present paper is to prove the non-existence of pseudo projective Ricci symmetric spacetimes $(PW\;RS)_4$ with different types of energy momentum tensor. We also discuss whether a fluid $(PW\;RS)_4$ spacetime with the basic vector field as the velocity vector field of the fluid can admit heat flux. Next we consider perfect fluid and dust fluid $(PW\;RS)_4$ spacetimes respectively. Finally we construct an example of a $(PW\;RS)_4$ spacetime.

• 전자공학회논문지B
• /
• 제32B권5호
• /
• pp.710-719
• /
• 1995

In LD driver with HBT's. the speed characteristics of HBT's are deteriorated very much mainly due to the source resistance(Rs) of the signal applied to the LD driving HBT. We improved the bandwidth of LD driver by 2-5GHz with modifications of EF buffer. Because the modified buffers are composed of EF structure, their bandwidths are decreased rapidly as Rs is increased. When Rs is large these buffers decrease the bandwidth of the LD driver rather than increase it. To solve this problem, we propose a new buffer structure which contaings new charging and discharging path for the parasitic collector capacitance of the HBT. For Rs>100${\Omega}$, it shows superior characteristics of improving bandwidth to the EF buffers. It also shows good gain characteristics.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.73-80
• /
• 2001

The shear strength of jointed rock is influenced by effective normal stress, joint wall compressive strength, joint roughness and so on. Since joint roughness makes considerable influences on shear strength of jointed rock, many studies tried to get quantitative joint roughness parameter. Until now, Joint Roughness Coefficient, JRC proposed by Barton has been prevalently used as a rock joint roughness parameter In spite of its disadvantages. In this study, a quantification of rock joint roughness is performed using surface roughness parameter, Rs. Proposed method is applied to rock core specimens, field joint surfaces, and JRC profiles. The scale of fluctuation is introduced to extend the suggested method to the large scale field joint surface roughness. Based on the quantification of joint surface roughness, joint shear tests are performed with the portable shear box. The relationship between joint surface roughness and joint shear strength is investigated and finally, a rock joint shear strength equation is derived from these results. The equation has considerable credibility and originality in that it is obtained from laboratory tests and expressed with quantified parameter.